Home

Aerodynamics

Applied sciences
Mechanical engineering
Aerospace engineering
Aerodynamics

About
Privacy
Disclaimer

Graph Chatbot

Related publications (31)

Method for wind harvesting and wind rejection in flying drones

Dario Floreano, Victor Casas Rochel, Nathan Samuel Müller, Charalampos Vourtsis, William John Stewart

The present invention concerns a method of manoeuvring a vertical take-off and landing, unmanned aerial drone (100) comprising at least an aerodynamic surface (101), wherein, during a flight of the drone, the aerodynamic surface generates lift and/or drag ...

2024

Lumped Drag Model Identification and Real-Time External Force Detection for Rotary-Wing Micro Aerial Vehicles

Alcherio Martinoli, Lucas Cédric Wälti

This work focuses on understanding and identifying the drag forces applied to a rotary-wing Micro Aerial Vehicle (MAV). We propose a lumped drag model that concisely describes the aerodynamical forces the MAV is subject to, with a minimal set of parameters ...

IEEE2024

Enhancing Wind Farm Performance through Axial Induction and Tilt Control: Insights from Wind Tunnel Experiments

Fernando Porté Agel, Guillem Armengol Barcos

Static axial induction control and tilt control are two strategies that have the potential to increase power production in wind farms, mitigating wake effects and increasing the available power for downstream turbines. In this study, wind tunnel experiment ...

MDPI2024

Data from: Optimal blade pitch control for enhanced vertical-axis wind turbine performance

Sébastien Le Fouest, Karen Ann J Mulleners

This directory contains open-source data obtained using a single-bladed H-type vertical-axis wind turbine prototype with individual blade pitching. This data results from the optimisation of the blade's pitching kinematics using a genetic algorithm at two ...

Zenodo2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...

IOPscience2024

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Earwig-inspired foldable origami wing for micro air vehicle gliding

Jamie Paik, Risa Ishiguro

Foldable wings serve as an effective solution for reducing the size of micro air vehicles (MAVs) during non-flight phases, without compromising the gliding capacity provided by the wing area. Among insects, earwigs exhibit the highest folding ratio in thei ...

Frontiers Media Sa2023

Vortex shedding from a composite hydrofoil: Experimental evidence of a novel "partial lock-in"

Mohamed Farhat, Qin Wu, Thomas Antoine Nicolas Berger, Yunqing Liu

Lock-in is of great importance in many engineering applications due to its practical implications for structural safety. The influence of composite bend-twist coupling on the wake dynamics and vortex-induced vibration around a carbon fiber composite hydrof ...

Aip Publishing2023

Wing and tail morphing in birds and drones

Enrico Ajanic

To aid humans in civilian tasks, future drones will have to operate in large cities that abound with difficult flight conditions such as confined spaces, obstacles, and turbulent air. Such drones must cruise efficiently to cover vast distances fast and als ...

EPFL2023

Fluid-structure interactions of bristled wings: the trade-off between weight and drag

Pedro Miguel Nunes Pereira de Almeida Reis, Matteo Pezzulla, Yuexia Luna Lin

The smallest flying insects often have bristled wings resembling feathers or combs. We combined experiments and three-dimensional numerical simulations to investigate the trade-off between wing weight and drag generation. In experiments of bristled strips, ...

Royal Soc2023

Dynamic stall characterisation and control for vertical-axis wind turbines

Sébastien Le Fouest

According to the International Energy Agency, the global net-zero emissions objective requires the installed wind power capacity to increase 11-fold between 2020 and 2050. The scientific community has recently voiced concerns about the logistic feasibility ...

EPFL2023

Time scales of dynamic stall development on a vertical-axis wind turbine blade

Sébastien Le Fouest, Karen Ann J Mulleners, Daniel Marie Fernex

Vertical-axis wind turbines are excellent candidates to diversify wind energy technology, but their aerodynamic complexity limits industrial deployment. To improve the efficiency and lifespan of vertical-axis wind turbines, we desire data-driven models and ...

2023

Numerical study on the scale effect of tip vortex cavitation induced by incoming velocities and scale ratios

Mohamed Farhat, Huaiyu Cheng, Mohan Xu

Large eddy simulations of tip vortex cavitation (TVC) around an elliptical hydrofoil is performed to study its scale effect. A satisfying agreement is obtained between the numerical and experimental data. It indicates that the scale effect of TVC is remark ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Unveiling the Rolling to Kayak Transition in Propelling Nanorods with Cargo Trapping and Pumping

Ignacio Pagonabarraga Mora

Magnetic nanorods driven by rotating fields in water can be rapidly steered along any direction while generating strong and localized hydrodynamic flow fields. Here we show that, when raising the frequency of the rotating field, these nanopropellers underg ...

AMER CHEMICAL SOC2023

Latent Representation of Computational Fluid Dynamics Meshes and Application to Airfoil Aerodynamics

Pascal Fua, Benoît Alain René Guillard, Zhen Wei

Mesh manipulation is central to computational fluid dynamics. However, creating appropriate computational meshes often involves substantial manual intervention that has to be repeated each time the target shape changes. To address this problem, we propose ...

AMER INST AERONAUTICS ASTRONAUTICS2023

Revisiting the role of friction coefficients in granular collapses: confrontation of 3-D non-smooth simulations with experiments

Gauthier Paul Daniel Marie Rousseau

In this paper, transient granular flows are examined both numerically and experimentally. Simulations are performed using the continuous three-dimensional (3-D) granular model introduced in Daviet & Bertails-Descoubes (ACM Trans. Graph., vol. 35, no. 4, 20 ...

Cambridge University Press2023

Wind Turbine Wakes in Active Yaw Control: Numerical and Theoretical Studies

Mou Lin

In this thesis, we explore the best practice of simulating the wakes of the turbines under active yaw control (AYC) using large-eddy simulation (LES). In the first study, we validate the blade-element actuator disk model (ADM-BE) for a yawed wind turbine. ...

EPFL2023

Strength and timing of primary and secondary vortices generated by a rotating plate

Karen Ann J Mulleners, Diego Francescangeli

Accurate predictions of how vortices grow, evolve, and separate from aerodynamic objects are desirable for various applications ranging from autonomous aerial vehicles to wind turbines. Here, we present an experimental characterisation of the formation pro ...

2023

Dielectric Elastomer Actuator-Based Valveless Impedance-Driven Pumping for Meso- and Macroscale Applications

Yves Perriard, Yoan René Cyrille Civet, Silje Ekroll Jahren, Thomas Guillaume Martinez, Francesco Clavica, Armando Matthieu Walter, Amine Benouhiba

Impedance pumps are simple designs that allow the generation or amplification of flow. They are fluid-filled systems based on flexible tubing connected to tubing with different impedances. A periodic off-center compression of the flexible tubing causes the ...

2023

Power Production and Blade Fatigue of a Wind Turbine Array Subjected to Active Yaw Control

Fernando Porté Agel, Mou Lin

This study investigated the power production and blade fatigue of a three-turbine array subjected to active yaw control (AYC) in full-wake and partial-wake configurations. A framework of a two-way coupled large eddy simulation (LES) and an aeroelastic blad ...

MDPI2023

Page 1 of 2