Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Michel RappazAfter a PhD in solid state physics (1978) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and a post-doc at Oak Ridge National Laboratory, Michel Rappaz joined the Institute of Materials of EPFL in 1981. After two years in an engineering company, he came back to EPFL in 1984 where he was nominated Adjunct Professor in 1990 and Full Professor in 2003. He retired from EPFL in 2015 and is now Emeritus Professor and independent consultant for several industries and research centres.
His main interests are in phase transformations and solidification, in particular the coupling of macroscopic aspects of heat and mass transfer with microscopic aspects of microstructure and defect formation. Among his diverse achievements, one can mention in particular the development of cellular automata for grain structure predictions and of granular models for hot tearing formation in castings, the coupling of Finite Element method with microscopic models of nucleation and growth, the application of the phase field method to the understanding of various microstructures, the discovery of quasicrystal mediated-nucleation in alloys, and many other studies both fundamental at the microstructure-defect level and more applied at the level of processes.
Some of the software developments have been commercialized by a spin-off company founded by his group in 1991 (Calcom SA), now part of the French company ESI. Michel Rappaz initiated in 1992 an annual postgraduate course on solidification which has been attended by more than 900 participants from all over the world. He is presently collaborating closely with another spin-off company started from his group, Novamet SàrL.
Michel Rappaz has received several awards, in particular the Mathewson co-author award (1994) and author award (1997) of the American Mineral, Metals and Materials Society (TMS), the Koerber foundation award jointly with Profs Y. Bréchet and M. Asbby (1996), the Sainte-Claire Deville Medal (1996) and the Grand Medal (2011) from the French Materials Society, the Bruce Chalmers Award of TMS (2002), the Mc Donald Memorial Lecture award of Canada (2005), the FEMS European Materials Gold Medal (2013) and the Brimacombe Prize of TMS (2015). He is a highly-cited author of ISI, a fellow of ASM, IOP and TMS, and has co-authored more than 200 publications and two books.
Emmanuel DenariéEmmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures. In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.
Lyesse LalouiDirector, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ; geoeg.net ; medusoil.com François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Cyril Cayron1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.
Véronique MichaudBackground:
1994 Habilitation à diriger des recherches ( INPG, France)
1991 PhD in Materials Engineering ( MIT, USA)
1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France)
Activities:
Since January 2018: Associate Dean of Engineering, in charge of Education
June 2012-Dec.2017: Head of the Materials Science and Engineering Section
Since April 2017: Associate Professor at EPFL
2009-2017 : Professeur Titulaire at EPFL
1997-2009: Researcher at EPFL
1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France)
1991-1994 : Post-doctoral research associate, MIT (USA)
Author of about 300 publications of which 140 in peer-reviewed journals
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Wilfried KurzWilfried Kurz is Professor Emeritus of Materials Science at "Ecole Polytechnique Fédérale de Lausanne, EPFL" (the Swiss Federal Institute of Technology Lausanne). He received his diploma and doctors degree from University of Leoben, Austria. In 1964 he joined the staff of the Battelle Geneva Research Laboratories, which he left in 1971 as head of the physical metallurgy group. In the same year he was appointed at the Swiss Federal Institute of Technology, where, until his retirement in 2003, he directed the Laboratory of Physical Metallurgy as well as of the Laser Materials Processing Centre. After participating in 1972/73 in the foundation of the curriculum in Materials Science and Engineering at EPFL he was twice Head of Department. Under others he served as president of SVMT (Swiss Assoc. for Materials Science & Technology) and of FEMS, the Federation of European Materials Societies. Author of four books, he published some 250 papers and patents, principally on the science and technology of solidification microstructures and processes. Professor Kurz is corresponding member of the Austrian Academy of Sciences, highly cited researcher and the recipient of awards from Eisenhuette Oesterreich; The Minerals, Metals & Materials Society (TMS, USA); ASM International, USA; Société Française de Métallurgie et de Matériaux; Deutsche Gesellschaft fuer Materialkunde; Institute of Materials, Minerals and Mining, London; Associatione Italiana di Metallurgia; Peoples Republic of China; Federation of European Materials Societies; and Iron and Steel Institute of Japan.
Selected publications of recent years:
Fundamentals of Solidification, W. Kurz, DJ Fisher, Trans Tech Publ., Switzerland,, 4th revised edition 1998, 305 p
Solidification, H Müller-Krumbhaar, W Kurz, E Brener, in: Phase Transformations in Materials, G Kostorz, ed., Wiley-VCH, 2001, p.81-170
Single-crystal laser deposition of superalloys: Processing-microstructure maps, M Gäumann, C Bezencon, P Canalis, W Kurz, Acta Mater., 49 (2001) 1051-1062
Solidification microstructure processing maps: Theory and application, W Kurz, Adv. Eng. Mater., 3 (2001) 443-452
Dendritic growth, W Kurz, R Trivedi, in: Proc. MC Flemings Symposium on Solidification and Materials Processing, eds R Abbaschian, H Brody, A Mortensen, TMS, Warrendale, PA, 2001, p. 87-99
Massive Transformation and Absolute Stability, M. Lima, W. Kurz, Metall. Mater. Trans. 33A (2002) 2337-2345
Introduction to Materials Science, JP Mercier, G Zambelli, W Kurz, Elsevier, Paris, 2002, 461 p.
Epitaxial deposition of MCrAlY coatings on a Ni-base superalloy by laser cladding, C Bezencon, A Schnell, W Kurz, Scripta Mater. 49 (2003) 705-709
Peritectic Coupled Growth, S Dobler, TS Lo, M Plapp, A Karma, W Kurz, Acta Mater., 52 (2004) 2795-2808
Solidification cracking of superalloy single- and bi-crystals, N Wang, S Mokadem, M Rappaz, W Kurz, Acta Mater., 52 (2004) 3173-3182
Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations, S Mokadem, C Bezencon, A Hauert, A Jacot, W Kurz, Metall. Mater. Trans. 38A (2007) 1500-1510
Plane Front Solidification, W. Kurz, ASM Handbook Vol. 15: Casting, 2008, 293-298
Solidification microstructures and solid-state parallels: Recent developments, future directions, M Asta, C Beckermann, A Karma, W Kurz, R Napolitano , M Plapp, G Purdy, M Rappaz, R Trivedi, Acta Mater., 57 (2009) 941971
Solute Trapping-Free Massive Transformation at Absolute Stability, A. Jacot, M. Sumida, W. Kurz, Acta Mater. 59 (2011) 1716-1724
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Peter RyserDr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
