Home

Electric power systems

Applied sciences
Electrical engineering
Power engineering
Electric power systems

About
Privacy
Disclaimer

Graph Chatbot

Related publications (32)

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Thermal sensing device and sensory feedback system and method using such thermal sensing device

Solaiman Shokur, Silvestro Micera, Jonathan Louis Muheim, Outman Akouissi, Francesco Iberite

The present invention concerns a thermal sensing device (1) and a sensory feedback system and method using such thermal sensing device, comprising at least one film (19) of electrically insulating polymer defining a global surface of the thermal sensing de ...

2024

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Assessment of the Feasibility of Applying the Electromagnetic Time Reversal Theory to Locate Defects in Grounding Electrodes

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami, Rafael Silva Alipio

In recent years, the electromagnetic time reversal (EMTR) theory has been successfully applied for locating various sources of disturbances, such as short-circuit faults, in power systems. In this paper, a theoretical analysis of the feasibility of applyin ...

2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

3PAC: A Plug-and-Play System for Distributed Power Sharing and Communication in Modular Robots

Jamie Paik, Christoph Heinrich Belke, Kevin Andrew Holdcroft

In modular robotics, there is classically a compromise between coupling complexity and functionality. The mechanical and electrical designs are linked, such that adding electrical features often requires redesigning the mechanical components. However, incr ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Metal-wire-embedded alumina insulating material using micro- and nanoscale 3D printing for surface flashover mitigation in a vacuum

Guang-Yu Sun

A micro- and nanoscale 3D printing technique is applied to fabricate a functional insulating material that mitigates surface discharge in a vacuum based on microscopic electron multipactor suppression. The proposed alumina ceramic insulator design consists ...

2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

A cryogenic electro-optic interconnect for superconducting devices

Tobias Kippenberg, Nathan Rafaël Bernier, Liu Qiu, Itay Shomroni, Amir Youssefi, Anton Lukashchuk

A major challenge to the scalability of cryogenic computing platforms is the heat load associated with the growing number of electrical cable connections between the superconducting circuitry and the room-temperature environment. Compared with electrical c ...

2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Sébastien Lani, Olivier Rémy Henry Chandran, Rubaiyet Iftekharul Haque, Ryan Mitchell van Dommelen

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Pierluigi Bruzzone, Kamil Sedlák

The impact of electromagnetic (EM) and thermal cyclic loading (referred as warm-up-cool-down-WUCD) on the Nb3Sn cable in conduit conductors for the toroidal field magnets of the ITER tokamak should be carefully assessed for the proper operation of the mach ...

2021

Dimensional scaling of thin-film stimulation electrode systems in translational research

Giuseppe Schiavone, Nicolas Vachicouras, Stéphanie Lacour

Objective. Electrical stimulation of biological tissue is an established technique in research and clinical practice that uses implanted electrodes to deliver electrical pulses for a variety of therapies. Significant research currently explores new electro ...

2021

Page 1 of 2