Concept

Lighting control console

A lighting control console (also called a lightboard, lighting board, or lighting desk) is an electronic device used in theatrical lighting design to control multiple stage lights at once. They are used throughout the entertainment industry and are normally placed at the front of house (FOH) position or in a control booth. All lighting control consoles can control dimmers which control the intensity of the lights. Many modern consoles can control Intelligent lighting (lights that can move, change colors and gobo patterns), fog machines and hazers, and other special effects devices. Some consoles can also interface with other electronic performance hardware (i.e. sound boards, projectors, media servers, automated winches and motors, etc.) to improve synchronization or unify their control. Lighting consoles communicate with the dimmers and other devices in the lighting system via an electronic control protocol. The most common protocol used in the entertainment industry today is DMX512, although other protocols (e.g. 0-10 V analog lighting control) may still be found in use, and newer protocols such as ACN and DMX-512-A are evolving to meet the demands of ever increasing device sophistication. Some lighting consoles can communicate over a Local IP network infrastructure to provide control over more scalable systems. A common protocol for this is ESTA E1.31 sACN (pronounced: streaming A.C.N.) or Art-Net. Consoles vary in size and complexity, from small preset boards to dedicated moving light consoles. The purpose of all lighting consoles, however is the same: to consolidate control of the lights into an organized, easy-to-use system, so that the lighting designer can concentrate on producing a good show. Most consoles accept MIDI Show Control signals and commands to allow show control systems to integrate their capabilities into more complex shows. Preset boards are the most basic lighting consoles—and also the most prevalent in smaller installations. They consist of two or more identical fader banks, called scenes.

Official source

https://en.wikipedia.org/wiki/Lighting_control_console

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related courses (4)

PENS-227: Night in Lausanne

Ce cours abordera la nuit à Lausanne sous une approche interdisciplinaire. À travers une traversée nocturne, nous dresserons un état des lieux des nuits lausannoises. La semaine permettra de réfléchir

AR-241: Building technology III

Ce cours traite des divers domaines techniques intervenant dans la conception et la réalisation d'un bâtiment, soit : physique du bâtiment, structures, matériaux, construction et installations techniq

ENG-608: Videomaking for science communication

The goal of this introductory workshop is to teach participants how to craft compelling and accurate science stories with engaging videos.

Related people (2)

Jean-Louis Scartezzini

Director of EPFL Solar Energy and Building Physics Laboratory (1994-present); Founder & Director of ENAC Institute of Infrastructures, Resources and Environment (2002-2009); Founder & Director of EPFL Doctoral Program in Environment (2002-2009); Co-Director of EPFL Institute of Building Technology (1994-1997); Associate Professor of Building Physics at EPFL (1994-1997); Associate Professor of Building Physics at University of Geneva (1990-1997); Group Leader & Research Fellow at the EPFL Solar Energy Research Group (1981-1989); Research Fellow at the Applied Geophysics Institute of University of Lausanne (1980-1981).

Marilyne Andersen

Marilyne Andersen is a Full Professor of Sustainable Construction Technologies and heads the Laboratory of Integrated Performance in Design (LIPID) that she launched in the Fall of 2010. She was Dean of the School of Architecture, Civil and Environmental Engineering (ENAC) at EPFL from 2013 to 2018 and is the Academic Director of the Smart Living Lab in Fribourg. She also co-leads the Student Kreativity and Innovation Laboratory (SKIL) at ENAC. Before joining EPFL as a faculty, she was an Assistant Professor then Associate Professor tenure-track in the Building Technology Group of the MIT School of Architecture and Planning and the Head of the MIT Daylighting Lab that she founded in 2004. She has also been Invited Professor at the Singapore University of Technology and Design in 2019. Marilyne Andersen owns a Master of Science in Physics and specialized in daylighting through her PhD in Building Physics at EPFL in the Solar Energy and Building Physics Laboratory (LESO) and as a Visiting Scholar in the Building Technologies Department of the Lawrence Berkeley National Laboratory in California. Her research lies at the interface between science, engineering and architectural design with a dedicated emphasis on the impact of daylight on building occupants. Focused on questions of comfort, perception and health and their implications on energy considerations, these research efforts aim towards a deeper integration of the design process with daylighting performance and indoor comfort, by reaching out to various fields of science, from chronobiology and neuroscience to psychophysics and computer graphics. She is leveraging this research in practice through OCULIGHT dynamics, a startup company she co-founded, which offers specialized consulting services on daylight performance and its psycho-physiological effects on building occupants. She is the author of more than 200 papers published in peer-reviewed journals and international conferences and the recipient of several grants and awards including: the Daylight Award for Research (2016), eleven publication awards and distinctions (2009, 2011, 2012, 2015, 2018, 2019) including the Taylor Technical Talent Award 2009 granted by the Illuminating Engineering Society, the 3M Non-Tenured Faculty Grant (2009), the Mitsui Career Development Professorship at MIT (2008) and the EPFL prize of the Chorafas Foundation awarded to her PhD thesis in Sustainability (2005). Her research or teaching has been supported by professional, institutional and industrial organizations such as: the Swiss and the U.S. National Science Foundations, the Velux Foundation, the European Horizon 2020 program, the Boston Society of Architects, the MIT Energy Initiative and InnoSuisse. She was the leader and faculty advisor of the Swiss Team and its NeighborHub project, who won the U.S. Solar Decathlon 2017 competition with 8 podiums out of 10 contests. She is a member of the Board of the LafargeHolcim Foundation for Sustainable Construction and Head of its Academic Committee. She is also a member of the Editorial Board of the journal Building and Environment by Elsevier, and of the journals LEUKOS (of the Illuminating Engineering Society) and Buildings and Cities, by Taylor and Francis. She is expert to the Innovation Council of InnoSuisse and Founding member as well as Board member of the Foundation Culture du Bâti (CUB), and is also founding member of the Daylight Academy and an active member of several committees of the Illuminating Engineering Society (IES) and International Commission on Illumination (CIE).

Related units (1)

Laboratory of Integrated Performance in Design

Official source

https://en.wikipedia.org/wiki/Lighting_control_console

About this result

Related courses (4)

PENS-227: Night in Lausanne

AR-241: Building technology III

ENG-608: Videomaking for science communication

The goal of this introductory workshop is to teach participants how to craft compelling and accurate science stories with engaging videos.

Related lectures (28)

Building Technology III: Visual Comfort

Explores the physics of building technology and the physiology of vision, emphasizing visual comfort and lighting effects.

AutoCAD 3D Lighting Basics

Explores AutoCAD 3D lighting basics, including extrusion, rendering, and camera settings.

Rasterization Pipeline

Covers the rasterization pipeline, transforming 3D geometry into 2D images efficiently.

Related publications (23)

Theory and application of a data-driven approach to compressive spectrometry in the assessment of neurophotic stimulation

Forrest Simon Webler

Recent advances in biology and neuroscience have elucidated pathways in which visible light initiates a signaling process, via the eye, responsible for activating direct and indirect biological responses. While the full impact of unnatural light patterns o ...

EPFL2022

Separation and Recycling Potential of Rare Earth Elements from Energy Systems: Feed and Economic Viability Review

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil, Viktoria Paetzel

This review explores the potential of separating and recycling rare earth elements (REEs) from different energy conversion systems, such as wind turbines, electric vehicles batteries, or lighting devices. The REEs include 17 elements (with global productio ...

2022

A simulation tool for building and lighting design considering ipRGC-influenced light responses

Marilyne Andersen, Clotilde Marie A Pierson, Myrta Gkaintatzi-Masouti

The ipRGCs in the human eye mediate several effects on people, such as alertness and circadian rhythms. The spectral, temporal and spatial characteristics of light influence the magnitude of these effects. To facilitate the anticipation of the ipRGC-influe ...

2022

Related people (2)

Jean-Louis Scartezzini

Marilyne Andersen

Related units (1)

Laboratory of Integrated Performance in Design

Related concepts (4)

Gobo (lighting)

A gobo is an object placed inside or in front of a light source to control the shape of the emitted light and its shadow. For studio photography purposes, the term "gobo" has come to refer to any device that casts a shadow, and various pieces of equipment that go in front of a light (such as a gobo arm or gobo head). In theatrical lighting, however, the term more specifically refers to a device placed in "the gate" or at the "point of focus" between the light source, called a lamp, and the lenses (or other optics).

Stage lighting instrument

Stage lighting instruments (lanterns, or luminaires in Europe) are used in stage lighting to illuminate theatrical productions, concerts, and other performances taking place in live performance venues. They are also used to light television studios and sound stages. Many stagecraft terms vary between the United States and the United Kingdom. In the United States, lighting fixtures are often called "instruments" or "units". In the UK, they are called "lanterns" or "luminaires". This article mainly uses terms common to the United States.

Stage lighting

Stage lighting is the craft of lighting as it applies to the production of theater, dance, opera, and other performance arts. Several different types of stage lighting instruments are used in this discipline. In addition to basic lighting, modern stage lighting can also include special effects, such as lasers and fog machines. People who work on stage lighting are commonly referred to as lighting technicians or lighting designers. The equipment used for stage lighting (e.g.