Publications related to High-temperature electrolysis

Phase-stable indium sulfide achieves an energy conversion efficiency of 14.3% for solar-assisted carbon dioxide reduction to formate

Michael Graetzel, Jing Gao, Jingshan Luo, Xiaoyu Zhang, Jun Li, Qixing Zhang

Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...

Cell Press2024

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Philippe Aubin

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Perspective Alkaline electrolyzers: Powering industries and overcoming fundamental challenges

Hubert Girault

For the sustainable development of the renewable hydrogen sector, alkaline electrolysis appears to be a technology of choice. Nevertheless, despite its long history that showed its reliability in the industrial field and despite the traditional belief from ...

Cell Press2024

Tailoring nanocatalysts and reaction interfaces for water- and CO2-electrolysis

Thi Ha My Pham

Renewable energy sources offer a promising solution for mitigating sustainability and CO2 emissions-related issues due to their vast energy generation capacity. They enable hydrogen production via water electrolysis, as well as carbon capture and utilizati ...

EPFL2024

In Situ Synthesis of CuxO/N Doped Graphdiyne with Pyridine N Configuration for Ammonia Production via Nitrate Reduction

Sophia Haussener, Roberto Valenza, Jian Li

Electroreduction of nitrate to ammonia provides an interesting pathway for wastewater treatment and valorization. Cu-based catalysts are active for the conversion of NO3− to NO2− but suffer from an inefficient hydrogenation process of NO2−. Herein, CuxO/N- ...

2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

Modeling, design and economics of PEC devices

Alexandre Dominique M. Cattry

Photo-electrochemical (PEC) devices allow for converting solar energy into chemical energy and for the production of energetically dense solar fuels. Light absorption, charge separation and transport, electrochemical reactions, and ionic transport are requ ...

EPFL2024

High temperature electrolysis system and method

Demetri Psaltis, Pooria Hadikhani, Steven Alexandre Schenk

The present invention concerns an electrolysis system for high temperature electrolysis including a plurality of flow-based electrolysis units configured to receive an electrolyte solution and to perform electrolysis to provide a first output gas and a sec ...

2023

Integrated production of urea and nitric acid in the pulp industry: techno-economic and environmental analysis of black liquor gasification-based processes

François Maréchal, Daniel Alexander Florez Orrego, Shivom Sharma, Meire Ellen Gorete Ribeiro Domingos

The pursuit of alternative energy sources for the nitrogen fertilizers sector has recently earned renewed interest due to increasing concerns regarding the world dependence on non-renewable energy resources and also motivated by the more stringent environm ...

2022

Kilowatt-scale solar hydrogen production system using a concentrated integrated photoelectrochemical device

Sophia Haussener, Saurabh Yuvraj Tembhurne, Clemens Gregor Suter, Isaac Thomas Holmes-Gentle

The production of synthetic fuels and chemicals from solar energy and abundant reagents offers a promising pathway to a sustainable fuel economy and chemical industry. For the production of hydrogen, photoelectrochemical or integrated photovoltaic and elec ...

2023

Gas generating membrane-less electrolyser

Demetri Psaltis, Pooria Hadikhani, Steven Alexandre Schenk

Electrolyser including a reactor (2) comprising a housing (4), fluidic channels (6a, 6b, 6c) within the housing, and electrodes (16a, 16c) comprising an anode (16a) and a cathode (16c). The fluidic channels include an inter-electrode channel (6b) arranged ...

2023

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The current study performs the thermodynamic and life-cycle assessments (LCA) of a novel charging station in two system designs. The goal is to design an efficient charging station for electric vehicles with high efficiencies and low environmental impacts ...

Nature Portfolio2023

Renewable Energy Integration and Waste Heat Recovery for the Production of Sustainable Jet Fuel and Decarbonization of Industrial Heating Applications

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The process synthesis and optimization methods used in this work include simulation of biomass gasification, hydrogen and synthetic natural gas production, and jet fuel production via a Fisher Tropsch unit. An energy integration approach, carried out by th ...

American Institute of Chemical Engineering2023

Transparent Porous Conductive Substrates for Gas-Phase Photoelectrochemical Hydrogen Production

Kevin Sivula, Jun Ho Yum, Marina Caroline Michèle Caretti, Benjamin Goldman, Rebekah Anne Wells, Simon Nussbaum, Emeline Cécile Rideau, Loï Charles Carbone, Elizaveta Potapova Mensi, Linda Lazouni, Hannah Elizabeth Johnson

Gas diffusion electrodes are essential components of common fuel and electrolysis cells but are typically made from graphitic carbon or metallic materials, which do not allow light transmittance and thus limit the development of gas-phase based photoelectr ...

Wiley-V C H Verlag Gmbh2023

The Effect of Y Content on Structural and Sorption Properties of A(2)B(7)-Type Phase in the La-Y-Ni-Al-Mn System

Andreas Züttel, Loris Giovanni Lombardo

Metal hydrides are an interesting group of chemical compounds, able to store hydrogen in a reversible, compact and safe manner. Among them, A(2)B(7)-type intermetallic alloys based on La-Mg-Ni have attracted particular attention due to their high electroch ...

MDPI2023

Integrated solar-driven high-temperature electrolysis operating with concentrated irradiation

Jan Van Herle, Sophia Haussener, Stefan Diethelm, Clemens Gregor Suter, Meng Lin

High-temperature electrolysis for reducing H2O (and CO2) to H2 (and CO) converts concentrated solar energy into fuels and chemical feedstock. We invented an integrated reactor concept comprising a solar cavity receiver for reactant heating, a solid oxide e ...

2022

Techno-Economic Evaluation of Biological and Fluidised-Bed Based Methanation Process Chains for Grid-Ready Biomethane Production

Oliver Kröcher, Tilman J. Schildhauer, Andreas Gantenbein

Three different power-to-methane process chains with grid injection in two scales (1 MWel and 6 MWel) were analysed regarding their investment and operation cost. The process chains were based on biological or catalytic bubbling fluidised bed methanation i ...

FRONTIERS MEDIA SA2022

Solar fuel processing: Comparative mini-review on research, technology development, and scaling

Sophia Haussener

Solar energy provides an unprecedented potential as a renewable and sustainable energy resource and will substantially reshape our future energy economy. It is not only useful in producing electricity but also (high-temperature) heat and fuel, both require ...

2022

Solid-state synthesis of CdFe2O4 binary catalyst for potential application in renewable hydrogen fuel generation

Michael Graetzel, Shaik Mohammed Zakeeruddin

Clean energy is highly needed at this time when the energy requirements are rapidly increasing. The observed increasing energy requirement are largely due to continued industrialization and global population explosion. The current means of energy source is ...

Nature Portfolio2022

Flexibilisation of Biogas-Based Power-to-Gas Processes: A Techno-Economic and Experimental Assessment

Andreas Gantenbein

Biogas-based power-to-X technology allows storing renewable electricity, while producing CO2-neutral products. This work investigates the conversion and upgrading of digestion-derived gas mixtures with focus on increasing the operational flexibility of the ...

EPFL2022