Publications related to Current loop

Systematic design of a multi-input multi-output controller by model-based decoupling: a demonstration on TCV using multi-species gas injection

Basil Duval, Christian Gabriel Theiler, Cristian Galperti, Artur Perek

In this paper, we present the first results of a systematically designed multi-input multi-output gas-injection controller on Tokamak a Configuration Variable (TCV). We demonstrate the simultaneous real-time control of the NII emission front position and l ...

IOP Publishing Ltd2023

Distributed Scheme for Line Overload Mitigation With Linearized AC Power Flow

Ping Hu, Li Ding

The transmission overload after a disturbance poses significant security risk to the power system. Once it happens, an efficient remedial action must be taken to relieve the line overloads as quickly as possible. The line overload mitigation problem become ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Ordering Events Based on Intentionality in Cyber-Physical Systems

Jean-Yves Le Boudec, Simon Bliudze, Wajeb Saab, Maaz Mashood Mohiuddin

We consider cyber-physical systems (CPSs) comprising a central controller that might be replicated for high-reliability, and one or more process agents. The controller receives measurements from process agents, causing it to compute and issue setpoints tha ...

2018

Advances in High-Speed Atomic Force Microscopy

Adrian Pascal Nievergelt

High-speed atomic force microscopy (HS-AFM) is a scanning probe technique capable of recording processes at the nanometre scale in real time. By sequentially increasing the speed of individual microscope components, images of surfaces can be recorded at up ...

EPFL2018

Plug-and-play design of current controllers for grid-feeding converters in DC microgrids

Giancarlo Ferrari Trecate, Michele Tucci, Raffaele Soloperto, Renke Han

In this paper, we address the problem of synthesizing decentralized current controllers for grid-feeding converters of current-controlled distributed generation units (CDGUs) in dc microgrids (MGs). Notably, a plug-and-play (PnP) design procedure is propos ...

IEEE2017

Ordering Events Based on Intentionality in Cyber-Physical Systems

Jean-Yves Le Boudec, Simon Bliudze, Wajeb Saab, Maaz Mashood Mohiuddin

We consider cyber-physical systems (CPSs) comprising a central controller that might be replicated for high-reliability, and one or more process agents. The controller receives measurements from process agents, causing it to compute and issue setpoints tha ...

2017

Digitally controlled analog proportional-integral-derivative (PID) controller for high-speed scanning probe microscopy

Georg Fantner, Maja Dukic Pjanic, Nahid Hosseini, Adrian Pascal Nievergelt, Santiago Harald Andany, Chen Yang

Nearly all scanning probe microscopes (SPMs) contain a feedback controller, which is used to move the scanner in the direction of the z-axis in order to maintain a constant setpoint based on the tip-sample interaction. The most frequently used feedback con ...

2017

High Performance Control of a Corner Cube Reflector by a Frequency-Domain Data-Driven Robust Control Method

Alireza Karimi, Etienne Frédéric Gabriel Thalmann

The linear motion of the Corner Cube Mechanism developed for the infrared sounder of the third generations of Meteosat weather satellites requires a high level of accuracy. The system is subject to external micro-vibration perturbations from surrounding in ...

Ieee2016

Hardware-in-the-loop Validation of the Grid Explicit Congestion Notification Mechanism for Primary Voltage Control in Active Distribution Networks

Jean-Yves Le Boudec, Mario Paolone, Marco Pignati, Konstantina Christakou, Styliani Sarri, Roman Rudnik

The Grid Explicit Congestion Notification control mechanism (GECN) is a broadcast-based real-time demand- response mechanism designed for primary voltage control in Active Distribution Networks (ADNs) [1,2]. An extensive set of off-line simulations has ind ...

Università degli Studi di Genova, Italy2016

Real Time Hybrid Model Predictive Control for the Current Profile of the Tokamak a Configuration Variable (TCV)

Stefano Coda, Jean-Marc Moret, Hoang Bao Le

Plasma stability is one of the obstacles in the path to the successful operation of fusion devices. Numerical control-oriented codes as it is the case of the widely accepted RZIp may be used within Tokamak simulations. The novelty of this article relies in ...

2016

Capture and Release of CO2 in Monoethanolamine Aqueous Solutions: New Insights from First-Principles Reaction Dynamics

Wanda Andreoni, Changru Ma, Fabio Pietrucci

Aqueous,monoethanolamine (MEA) solution is commonly used for post-combustion carbon capture via chemical absorption. Extensive research has been carried out to characterize both uptake and release of carbon dioxide (CO2), with the aim of improving process ...

Amer Chemical Soc2015

Robust and Agile 3D Biped Walking With Steering Capability Using a Footstep Predictive Approach

Auke Ijspeert, Salman Faraji, Soha Pouya

In this paper, we formulate a novel hierarchical controller for walking of torque controlled humanoid robots. Our method uses a whole body optimization approach which generates joint torques, given Cartesian accelerations of different points on the robot. ...

2014

Improved methodology and set-point design for diagnosis of model-plant mismatch in control loops using plant-model ratio

Alireza Karimi

Performance of any model-based control scheme depends on the quality of model. When these schemes deliver poor loop performance due to model-plant mismatch (MPM), a detection of the same needs to be in place. A recently introduced plant model ratio (PMR) n ...

Elsevier2014

Physics of the conceptual design of the ITER plasma control system

Jonathan Bryan Lister, Richard Pitts

The ITER plasma control system (PCS) will play a central role in enabling the experimental program to attempt to sustain DT plasmas with Q = 10 for several hundred seconds and also support research toward the development of steady-state operation in ITER. ...

Elsevier Science Sa2014

A real-time control system architecture for industrial power amplifiers

Faran Ahmed Qureshi

Power amplifiers are a highly important component in a range of industrial applications, such as, servo-drives, magnetic resonance imaging, energy systems, and audio. The control system for power amplifiers should satisfy a range of requirements, e. g., of ...

Ieee2013

Progress on the ITER H&D EC Upper Launcher Steering-Mirror Control System

Timothy Goodman, René Chavan, Federico Alberto Alfredo Felici, Jean-Daniel Landis, Frédéric Dolizy, Francisco Sanchez, Robert Bertizzolo

The ITER Heating and Current Drive Upper Launcher (H&CD EC UL) uses a pneumomechanical steering-mirror assembly (SMA) to steer the RF beams for their deposition in the appropriate location in the plasma to control magnetohydrodynamic activity (neoclassical ...

Institute of Electrical and Electronics Engineers2010

An Energetic Based Method Leading to Merged Control Loops for the Stability of Input Filters

Philippe Barrade

In most of applications, power converters are controlled to allow their output current/voltage to follow the required reference values. For DC/DC and DC/AC converters, the control must take into account their input voltage, which must be rejected. In such ...

2010

Trajectory Tracking through Overactuation for an Optical Delay Line

Denis Gillet, Philippe Müllhaupt, Yvan Michellod

Nano-positioning devices constitute the mechatronic heart of the VLTI (Very Large Telescope Interferometer) for the ESO (European Southern Observatory) astrometry instrumentation. In the context of the development of a new optical Differential Delay Line ( ...

2007

Neighboring extremals in optimization and control

Sébastien Gros

Optimization arises naturally when process performance needs improvement. This is often the case in industry because of competition – the product has to be proposed at the lowest possible cost. From the point of view of control, optimization consists in de ...

EPFL2007

Strategy for the Control of a Dual-stage Nano-positioning System with a Single Metrology

Denis Gillet, Philippe Müllhaupt, Yvan Michellod

A double-stage feedback control structure for a double-stage mechanical system, with a single optical metrology is developed to reach the nanometer accuracy at high bandwidth over large displacements. A piezoelectric stack actuator is used for fine positio ...

2006