Publications related to Shale oil extraction

Evolution of water content and suction of Opalinus Clay from recovery at the drilling site to handling in the laboratory

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

Advanced geotechnical engineering applications, such as shale gas extraction, CO2 geological sequestration, and geological radioactive waste storage, often involve various types of shales located at significant depths. Shales exhibit mechanical properties ...

Pergamon-Elsevier Science Ltd2024

Hydro-Mechanical Characterization of a Shale by Unusually High-Pressure Oedometric Tests

Alessio Ferrari, Eleonora Crisci

The note presents selected results of an experimental campaign conducted with the aim to investigate the hydro-mechanical behaviour of a shale recovered at a depth of about 900 m below the ground. High-pressure oedometric tests were performed to investigat ...

Wei Wu, Universität für Bodenkultur2023

Design and fabrication of an electrostatic precipitator for infrared spectroscopy

Satoshi Takahama, Nikunj Dudani

Infrared (IR) spectroscopy is a direct measurement technique for chemical characterization of aerosols that can be applied without solvent extraction thermal treatment a priori. This technique has been used for chemical speciation, source apportionment, an ...

COPERNICUS GESELLSCHAFT MBH2022

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Discussion on "Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric" of Schuster, V., Rybacki, E., Bonnelye, A., Herrmann, J., Schleicher, AM, Dresen, G

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

The testing procedure and results on saturated samples of Opalinus Clay in the work of Schuster et al. (Rock Mech Rock Eng https://doi.org/10.1007/ s00603-021-02474-3, 2021) were conducted and presented using strain rates two to four orders of magnitudes h ...

2022

Synthesis of Chiral Cyclopentadienyl Complexes and Applications Towards C-H Functionalization

Benoît Daniel Bertrand Audic

Metal-catalysed C-H bond functionalization has received tremendous attention and developed rapidly over the past decades. Cyclopentadienyl (Cp) metal complexes and their asymmetric counterparts (CpX) are part of a central organometallic category empowering ...

EPFL2021

Benchmark study of undrained triaxial testing of Opalinus Clay shale: Results and implications for robust testing

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Triaxial testing of argillaceous rocks and shales is significantly more challenging than conventional rock mechanical testing. The challenges are mainly related to the very low permeability of these geomaterials, and their sensitivity to exposure of atmosp ...

ELSEVIER2021

Experimental assessment of the hydro-mechanical behaviour of a shale caprock during CO2 injection

Lyesse Laloui, Alessio Ferrari, Eleni Stavropoulou, Alberto Minardi, Taeheon Kim

The presented experimental study focuses on the hydro-mechanical characterisation of a shale caprock (Opalinus Clay) in contact with carbon dioxide. The objective of this paper, consists in the evaluation of the material's sealing capacity in terms of entr ...

2021

Developing a high capacity axis translation apparatus for gas shale testing

Lyesse Laloui, Alessio Ferrari, Jinwoo Kim

Gas shales are usually partially saturated due to hydrocarbon generation and often have a low in-situ degree of saturation less than 40 %. During stimulation, substantial fluid imbibition into the formation occurs due to high suction. Recent research on th ...

EDP Sciences2020

Numerical investigation on water exchange of shale samples

Alessio Ferrari, Sara Incollingo

Interest in the hydraulic and mechanical characterization of shales has grown in recent years, because of their application in the context of energy geotechnics. In the frame of nuclear waste disposal shales are considered as host formations for the placem ...

E D P SCIENCES2020

Hydro-mechanical response of Opalinus Clay shale: dependency on composition and burial depth

Eleonora Crisci

Shales are sedimentary formation currently studied for their involvement in many geo-energy related applications, such as radioactive waste disposal, CO2 sequestration, oil and gas extraction. In Switzerland the Opalinus Clay shale has been selected has ho ...

EPFL2019

Optimization of Lignin Extraction from Pine Wood for Fast Pyrolysis by Using γ-valerolactone-Based Binary Solvent System

Jeremy Luterbacher, Allen Puente-Urbina

Fast pyrolysis of lignin is a promising method to produce aromatic chemicals and fuels. Lignin structure and pyrolysis conditions determine the liquid yield and product selectivity. Extraction of pine wood using γ-valerolactone (GVL) mixed with water in th ...

2019

On the swelling behavior of shallow Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

The Opalinus Clay shale is the selected geological formation for the construction of a deep geological repository in Switzerland. The geomaterial will experience cyclic drying and wetting paths during different stages of the repository lifetime. The shale, ...

2018

Hydro-mechanical characterization of gas shales and Opalinus Clay shale in partially saturated conditions

Alberto Minardi

An experimental study on the behaviour of shales in partially water saturated conditions is presented in this thesis. The Opalinus Clay shale and gas shales from different unconventional reservoirs have been studied. Opalinus Clay is currently considered a ...

EPFL2018

Impact of CO2 injection on the hydro-mechanical behaviour of a clay-rich caprock

Lyesse Laloui, Valentina Favero

The safe storage of CO2 in deep reservoir units requires an efficient sealing of the overlaying caprock. The acidic environment caused by the dissolution of CO2 into the pore fluid can induce changes in the microstructure of the material over the long term ...

2018

The impact of the volumetric swelling behavior on the water uptake of gas shale

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Water uptake of gas shales is commonly considered one of the most important factors responsible for fluid loss during flowback operations after hydraulic fracturing. Imbibition experiments cover a key role in this context to analyze the impact of several f ...

2018

Gas Shales Testing in Controlled Partially Saturated Conditions

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Laboratory measurement of mechanical properties of gas shales represents a challenging topic in geomechanics due to their peculiar features such as heterogeneity, anisotropy, low permeability, and complex physical phenomena related to the hydro-mechanical ...

2018

Gas shale water imbibition tests with controlled suction technique

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Water loss during flowback operations represents one of the main challenges related to the use of hydraulic stimulation to exploit shale gas resources. About 20% of the injected fracturing fluids are usually recovered after stimulation. Fluid imbibition is ...

Springer verlag2018

Comparison of extraction techniques for product diversification in a supercritical water gasification-based sugarcane-wet microalgae biorefinery: Thermoeconomic and environmental analysis

François Maréchal, Adriano Viana Ensinas

This study presents a thermoeconomic and environmental assessment of the extraction of lipids and proteins from wet microalgal biomass in a 3G biorefinery by two different technologies: supercritical fluid extraction (SFE) and low-pressure solvent extracti ...

ELSEVIER SCI LTD2018

Plastic-damage modeling of saturated quasi-brittle shales

Lyesse Laloui, Francesco Parisio

The constitutive modeling of shales is an important topic in the geomechanics community as it is often encountered in advanced applications such as nuclear waste storage, CO2 sequestration, and unconventional oil and gas exploitation. The goal of this work ...

Elsevier2017