Publications related to Crevice corrosion

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler, Laura Brambilla

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Lei Zhang, Kangning Zhao, Jun Lu, Xu Zhang

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Amer Chemical Soc2023

Revealing cation and metal gradients in and underneath passive films of the stainless steel 1.4652 in acidic and alkaline electrolytes with angular resolved dual energy X-ray photo-electron spectroscopy

Stefano Mischler, Patrik Schmutz, Anna Neus Igual Muñoz, Roland Hauert

Passive films on the superaustenitic stainless steel 1.4652 were studied using angular resolved hard X-ray photo-electron spectroscopy (HAXPES), which provides an increased information depth compared to conventional X-ray photo-electron spectroscopy (XPS). ...

Wiley2023

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

Elucidating the Rate-Limiting Processes in High-Temperature Sodium-Metal Chloride Batteries

Corsin Battaglia, Patrik Schmutz, Daniel Alexander Landmann

Sodium-metal chloride batteries are considered a sustainable and safe alternative to lithium-ion batteries for large-scale stationary electricity storage, but exhibit disadvantages in rate capability. Several studies identify metal-ion migration through th ...

WILEY2022

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Multiaxial fatigue behavior and strengthening of riveted double-angle connections in steel bridges using prestressed CFRP rods

Hossein Heydarinouri

A large number of aging road and railway riveted metallic bridges suffer from fatigue problems. Stringer-to-floor-beam double-angle bridge connections are among the most fatigue-prone details due to the many cyclic distortion-induced stresses from axle loa ...

EPFL2021

Tensile response of textile reinforced concrete

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Textile Reinforced Concrete (TRC) is a cementitious composite material where a carbon or glass fabric is embedded as reinforcement. The use of TRC allows building thin and light structures, with reduced concrete covers and an enhanced durability due to the ...

2020

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices

Jan Van Herle, Manuel Bianco, Stéphane François Jean Poitel

Plasma nitriding was applied to ferritic stainless steel substrates to improve their performances as interconnects for solid oxide fuel cell devices. The samples underwent electrical conductivity test and SEM/EDS, TEM/EDS, environmental-SEM analyses. The f ...

2020

'Green' Cr(III)-based electrodeposition of stainless steel-like FeCrNi: synthesis, mechanisms, material properties of films and micro-nanocomponents for bio-medical applications

Enrico Bertero

The electrodeposition (ED) of stainless steel (SS) -like FeCrNi alloys for miniaturised devices is appealing for bio-medicine as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, bio-compatibility) at low-cost. Ho ...

EPFL2020

Corrosion Mechanisms of Diamond-like Carbon Coated Interlayers & Interfaces

Emilija Ilic

Diamond-like carbon (DLC) coatings can improve the wear resistance of articulating implants. However despite successful in-vitro testing, some DLC coated joint replacements had to be revised prematurely, mainly due to coating delamination induced by corros ...

EPFL2019

Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions

Stefano Mischler, Patrik Schmutz, Roland Hauert, Emilija Ilic

Silicon (Si) based implantable components are widely used to restore functionalities in the human body. However, there have been reported instances of Si corroding after only a few years of implantation. A key parameter often overlooked when assessing Si s ...

2019

Tribological response of multilayered gold nickel coating deposited on fine turned surfaces

Stefano Mischler, Valentine Agnès Madeleine Magnin

Gold coating are widely used in industry due to their corrosion resistance, electrical conductivity and low contact resistance. However, friction and wear can limit their functionality and lifetime. This study addresses the degradation of a commercial fine ...

ELSEVIER SCIENCE SA2019

'Green' Cr(iii)-glycine electrolyte for the production of FeCrNi coatings: electrodeposition mechanisms and role of by-products in terms of coating composition and microstructure

Stefano Mischler, Johann Michler, Enrico Bertero

The electrodeposition of stainless steel-like FeCrNi alloys for miniaturised devices is appealing as it would allow combining excellent material properties (e.g. corrosion resistance, hardness, biocompatibility) at low-cost. However, conventional baths oft ...

2019