Publications related to Helmholtz coil

Computational design and additive manufacturing of electromagnetic coils

The modern world is heavily reliant on electromagnetic devices to convert mechanical energy into electrical energy and vice versa. These devices are fundamental to powering our society, and the growing need for automated production lines and electrified tr ...

EPFL2023

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Characterisation of electron cyclotron wall conditioning plasma in ASDEX Upgrade

Richard Pitts

Electron cyclotron wall condition (ECWC) discharges are characterised in ASDEX Upgrade with full tungsten plasma facing components and X2 polarised waves launched from the equatorial ports, relevant to ECWC conditions in ITER Pre-Fusion Power Operation pha ...

IOP Publishing Ltd2023

Equilibrium pressure limits in stellarators

Antoine Baillod

This thesis delves into the potential of magnetic fusion energy, and in particular focuses on the stellarator concept. Stellarators use external coils to produce 3-dimensional (3D) magnetic fields that confine a thermonuclear plasma in a topologically toro ...

EPFL2023

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè

Paschen failures in ITER, W7-X and JT60 superconducting coils at the acceptance tests have shown that it is highly desirable to lower the coil discharge voltage (U-d) of the DEMO Toroidal Field (TF) coils. Another benefit of lowering the U-d might be the r ...

IEEE Institute of Electrical and Electronics Engineers2022

Analysis of the effects of thermal anchors on the reduction of the parasitic load to the EU-DEMO TF coils

Kamil Sedlák

The design of the superconducting magnet system of the EU-DEMO tokamak reached the end of the preconceptual design phase, and a careful investigation of the parasitic heat load from the room-temperature environment is needed. A possible route for the paras ...

2021

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021

Parametric study of the TF coil design for the European DEMO

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

In addition to a reduced number of feeders, which would simplify their integration in the cryostat of the tokamak, the present study considers the possibility to reduce the voltage during safety discharge of the toroidal field (TF) coils. A lowered dischar ...

2021

Magnetic Design of a Superconducting Toroidal Gantry for Hadron Therapy

Luca Bottura, Enrico Felcini, Bertrand Dutoit, Bertrand Dutoit

Hadron and proton therapy are cutting edge techniques for cancer treatment and a great development of specialized medical centers and research facilities is foreseen in the next decades. One of the main obstacles to the penetration of the use of charged pa ...

IEEE Institute of Electrical and Electronics Engineers2020

Magnetic field configurational study on a helicon-based plasma source for future neutral beam systems

Ivo Furno, Alan Howling, Philippe Frédérique Bruno Guittienne, Rémy Jacquier, Riccardo Agnello

A helicon-based plasma source is under development and exploration at CEA-IRFM to produce an efficient and dense magnetized plasma column. The final objective of this development is the extraction and acceleration of a blade-like negative ion beam in view ...

IOP PUBLISHING LTD2019

Integrated approach for auto-adaptive synchronous motor winding

Florian Louis Copt

The intrinsic characteristic of a permanent magnet synchronous motor is defined by its internal dimensions, its material properties, as well as the power supply used in conjunction with the motor. When an extended operating range is desired but the electro ...

EPFL2018

Stabilization of the vertical instability by non-axisymmetric coils

Wilfred Anthony Cooper

In a published Physical Review Letter (Reiman 2007 Phys. Rev. Lett. 99 135007), it was shown that axisymmetric (or vertical) stability can be improved by placing a set of parallelogram coils above and below the plasma oriented at an angle to the constant t ...

IOP Publishing Ltd2016

Statistics of Test Results for the ITER Nb3Sn and NbTi Conductors in the SULTAN Facility

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Rainer Wesche

The series production of Nb3Sn and NbTi cable-inconduit conductors (CICC) for the winding of various coils in the International Thermonuclear Experimental Reactor (ITER) magnet system is being completed in 2015. The tests of the ITER conductor samples are ...

IEEE Institute of Electrical and Electronics Engineers2016

Construction and test of a non-insulated insert coil using coated conductor tape

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

A small coated conductor coil (central field 1 T at 200 A) was constructed and tested in order to evaluate the benefit and the possible disadvantages of non insulated, double pancake construction, in particular regarding quench protection. The insert coil ...

Iop Publishing Ltd2014

Collective Flux Jumps observed in the Operation of the EDIPO Magnet

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Stephen Alfred March

The tilted head race track coils of the EDIPO test facility are wound with cable-in-conduit conductors made by high current density Nb3Sn strands, Jc = 2400 A/mm2 at 12 T – 4.2 K. Since the commissioning of the coils, frequent voltage spikes were observed ...

IEEE Institute of Electrical and Electronics Engineers2014

Superparamagnetic anisotropic elastomer connectors exhibiting reversible magneto-piezoresistivity

Thomas Maeder

An anisotropic magnetorheological composite formed by dispersions of silver-covered magnetite microparticles (Fe3O4@Ag) in polydimethylsiloxane (PDMS) displaying electrical conduction only in one preferred direction is presented. A set-up for applying and ...

Elsevier2013

Edge Localized Mode Control in TCV

Jonathan Rossel

The Tokamak concept, based on magnetic confinement of a hydrogen plasma, is one of today's most promising paths to energy production by nuclear fusion. The experimental scenarios leading to the largest fusion rate are based on a high confinement plasma reg ...

EPFL2012

Status Report of the EDIPO Project

Pierluigi Bruzzone, Rainer Wesche, Martin Vogel

The aim of this paper is to present an up to date review of the status of the European DIPOle (EDIPO) project whose objective is to build a new facility to perform both DC and AC tests of large superconductor samples in high magnetic background field (up t ...

IEEE Institute of Electrical and Electronics Engineers2011

Design of the ITER high-frequency magnetic diagnostic coils

Duccio Testa, René Chavan, Nadine Baluc, Matthieu Toussaint, Jonathan Bryan Lister, Thomas Maeder, Philippe Marmillod, Francisco Sanchez

This paper is an overview of work carried out on the design of the ITER high-frequency magnetic diagnostic coil (HF sensor). In the first part, the ITER requirements for the HF sensor are presented. In the second part, the ITER reference design of the HF s ...

Elsevier2011

A Far-Infrared Polarimeter Diagnostic for the Measurement of the Poloidal Magnetic Field in the TCV Tokamak

Information about the poloidal field inside the plasma and about the current density profile is essential for the understanding of the behavior of tokamak plasmas. The poloidal field outside the plasma edge is easily measured by a set of magnetic coils, wh ...

EPFL2011