Publications related to Cable layer

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Andromachi Tsirou, Amar Kapic

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Transport à câble aérien en milieu urbain: pertinence et pratique

Fernando Anisio De Oliveira Simas

The intense urbanization of cities has left few options when it comes to insert large mobility infrastructure they need to move their inhabitants. A surface rail network, a dedicated roadway bus line or any other mobility infrastructure such as a tramway a ...

EPFL2019

HTS high current cable for fusion application

Nikolay Bykovskiy

State-of-the-art magnets of fusion devices, which are based on low temperature superconductors (LTS), have almost reached their technological limits in terms of generated magnetic fields. Further progress can be made using novel high temperature supercondu ...

EPFL2017

Design, Manufacture, and Test of an 80 kA-Class Nb3Sn Cable-In-Conduit Conductor With Rectangular Geometry and Distributed Pressure Relief Channels

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Rainer Wesche

Within the frame of the R& D activities carried out in Europe for the toroidal field coils of the nuclear fusion device DEMO, a fundamental milestone was considered to be the demonstration of Nb3Sn cable-in-conduit conductors (CICC) performance in the dema ...

IEEE Institute of Electrical and Electronics Engineers2017

Test of the MF-CICC Conductor Designed for the 12-T Outsert Coil of the HFML 45-T Hybrid Magnet

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

A 45-T hybrid magnet is being built at the High Field Magnet Laboratory of the Radboud University in Nijmegen, The Netherlands. The hybrid magnet consists of a 12-T cable-in- conduit-conductor (CICC) Nb 3Sn superconducting outsert and a 33-T resistive inse ...

IEEE Institute of Electrical and Electronics Engineers2016

Deployment of a tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Deployable structures are structures that transform their shape from a compact state to an extended in-service position. Structures composed of tension elements that surround compression elements in equilibrium are called tensegrity structures. Tensegritie ...

Asce-Amer Soc Civil Engineers2015

Mid-span connection of a deployable tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

This paper describes a near full-scale deployable tensegrity footbridge. Tensegrity structures are pre-stressed structures composed of tension elements (cables) surrounded by compression elements (struts) in equilibrium. Deployment of two bridge halves is ...

2015

A deployable tensegrity footbridge that connects at mid-span

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

This paper describes a near full-scale deployable tensegrity footbridge that deploys from both sides and connects at mid-span. Tensegrity structures are pre-stressed structures composed of tension elements (cables) surrounded by compression elements (strut ...

2015

Development of HTS Conductors for Fusion Magnets

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

In view of the development of cables for next-generation fusion reactors, research activities are carried out on all HTS materials available from industrial production. Preliminary design of a react and wind cable using Bi-2212 wires is carried out, inspir ...

IEEE Institute of Electrical and Electronics Engineers2015

Strain Management in HTS High Current Cables

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

The best performing HTS conductors are available in the form of thin tapes with operating current in the range of 200 A at the operating conditions. To realize conductors with high current carrying capability, in the range of several tens of kA, a large nu ...

IEEE Institute of Electrical and Electronics Engineers2015

Impact of Cable Twist Pitch on T-cs-Degradation and AC Loss in Nb3Sn Conductors for ITER Central Solenoids

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

The performance of tour Nb3Sn conductors for the ITER central solenoids was tested. The current sharing temperatures (T-cs) were measured over approximately 9000 electromagnetic cycles, including two or three thermal cycles between 4.2 K and room temperatu ...

IEEE Institute of Electrical and Electronics Engineers2014

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Pierluigi Bruzzone, Ciro Calzolaio

The knowledge of the thermal strain distribution of the Nb3Sn filaments in a cable in conduit conductor (CICC) cross section is a key parameter in understanding the cable performance evolution when it undergoes electromagnetic (EM) cyclic loading. A CICC i ...

IEEE Institute of Electrical and Electronics Engineers2014

Toward development of a biomimetic tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Biomimetic structures interact with their environment, change their properties, learn and self-repair, thereby providing properties that are similar to living organisms. Interactions with the environment involve unique challenges in the field of computatio ...

International Center for Numerical Methods in Engineering (CIMNE)2014

A New Sensor Platform for Investigating Turbulence in Stratified Coastal Environments

Ulrich Lemmin, Damien Bouffard

Characterizing and quantifying vertical exchange processes is essential for understanding physical and biological dynamics in stratified lakes and oceans. Unfortunately, the role of mixing is still poorly understood because of the challenges of conducting ...

American Meteorological Society2013

MgB2 Hollow Wires and Cables Embedded in a Mg Alloy Matrix

Pierluigi Bruzzone, Davide Uglietti

The brittleness of the MgB2 wires prevents performing a cable architecture with very small bending radius, similar to NbTi Rutherford cables. Consequently, it is important to reduce the thickness of the superconducting materials in order to increase its be ...

IEEE Institute of Electrical and Electronics Engineers2013