Publications related to Impulse excitation technique

Influence of fiber orientation on the tensile behavior of UHPFRC and reinforced UHPFRC under static and fatigue loadings

Ultra-high performance fiber reinforced cementitious composite (UHPFRC) is a modern class of cementitious building materials. Because of its superior mechanical properties and durability, it is increasingly used globally to rehabilitate, strengthen and mod ...

EPFL2024

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

On the bulk compressibility of close-packed particles and their composites

Andreas Mortensen, Maria Gabriella Tarantino

The hydrostatic compaction of composites comprising a closely-packed particle-bed filled by a dense matrix is measured experimentally using a fluid-pressurization apparatus. A highly compliant polymer or pure aluminium are infiltrated into preforms of pack ...

ELSEVIER SCI LTD2022

Modelling of in-plane seismic behaviour of one-way steel or timber jack arch floors in existing buildings

Savvas Saloustros

The type of floor system has a decisive role in the seismic performance of unreinforced masonry buildings. The in-plane stiffness of the floors has to be adequately represented in the numerical modelling of existing buildings, as it can influence their sei ...

2022

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

Véronique Michaud, Vincent Werlen, Christian Rytka

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Harm-Anton Klok, Véronique Michaud, Jeremy Luterbacher, Yves Leterrier, Maxime Alexandre Clément Hedou, Adrien Julien Demongeot, Graham Reid Dick, Christèle Rayroud, Thibault Rambert

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

PE-UHPFRC is a new Ultra High-Performance Fiber Reinforced Concrete (UHPFRC), which is developed to reduce the environmental impact of conventional UHPFRC by replacing the steel fibers with synthetic ones and reducing the clinker content in the mix. The de ...

2021

Flexural behaviour of post-tensioned glass beams: Experimental and analytical study of three beam typologies

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The concept of post-tensioned glass beams builds on the concrete analogy of the reinforced glass beams. By additionally prestressing the reinforcement in a post-tensioned system, a compressive pre-stress is applied on the glass, enhancing the initial fract ...

2021

Structure-Preserving Reduced Basis Methods For Poisson Systems

Jan Sickmann Hesthaven, Cecilia Pagliantini

We develop structure-preserving reduced basis methods for a large class of nondissipative problems by resorting to their formulation as Hamiltonian dynamical systems. With this perspective, the phase space is naturally endowed with a Poisson manifold struc ...

AMER MATHEMATICAL SOC2021

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Véronique Michaud, Baris Çaglar, Lode Geeraard Daelemans

The through-thickness compressive behavior of fabric reinforcements is crucial in liquid composite molding manufacturing processes. Predictive simulations of the compressive response are thus necessary to enable a virtual processing workflow. These are com ...

2021

Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction

Thomas Keller, Anastasios Vassilopoulos, Alireza Farajzadeh Moshtaghin, Steffen Franke

The aim of this work is the investigation of mesoscale/local variability in mechanical properties of clear timber in the radial direction. Clear Norway spruce wood, Picea abies, was used for cutting specimens of different lengths with a small cross-section ...

2020

The ratio of shear to elastic modulus of in-plane loaded masonry

Katrin Beyer, Bastian Valentin Wilding, Michele Godio

When designing unreinforced masonry buildings, the wall stiffness and, consequently, the masonry elastic and shear modulus E and G are essential parameters. Current codes provide empirical estimates of the masonry elastic modulus and a ratio between the sh ...

2020

Elastic properties of self-organized nanogratings produced by femtosecond laser exposure of fused silica

Yves Bellouard, Pieter Vlugter

Under certain exposure conditions, a femtosecond laser beam focused in the bulk of fused silica leads to the formation of self-organized structures consisting of a series of “nanolayers,” parallel to one another. Remarkably, this laser-induced nanoscale an ...

2020

Tensile response of low clinker UHPFRC subjected to fully restrained shrinkage

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

This paper addresses the tensile response of Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to restrained autogenous shrinkage deformations under full and partial restraint conditions, right after casting and until ...

Pergamon-Elsevier Science Ltd2019

Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys

William Curtin, Céline Varvenne

The mechanical properties due to solid solution strengthening are explored within the single phase face-centered cubic (fcc) domain of the Co-Cr-Fe-Mn Ni high entropy alloy (HEA) system. This is achieved by combining an efficient and reproducible metallurg ...

2019

Equipartition of Energy Defines the Size-Thickness Relationship in Liquid-Exfoliated Nanosheets

Nicola Marzari, Davide Campi

Liquid phase exfoliation is a commonly used method to produce 2D nanosheets from a range of layered crystals. However, such nanosheets display broad size and thickness distributions and correlations between area and thickness, issues that limit nanosheet a ...

AMER CHEMICAL SOC2019

Time-Frequency Characterization of Resting-State Brain Function Reveals Overlapping Components with Specific Topology and Frequency Content

Dimitri Nestor Alice Van De Ville, Thomas William Arthur Bolton

Even at rest, functional magnetic resonance imaging (fMRI) data displays exquisitely complex temporal dynamics. Here, we deployed a time-frequency analysis to track the modulus of fMRI signals over time, across space (a set of 341 brain areas) and frequenc ...

ASSOC COMPUTING MACHINERY2019

Mechanical properties of MC multimetallic carbides in steel

Lionel Michelet

Carbides constitute a class of materials used for many applications, where excellent mechanical properties, such as stiffness, hardness and fracture toughness, are required. The machining industry is a typical example where carbide are crucial materials. W ...

EPFL2018

Depth-dependent mechanical properties of human articular cartilage obtained by indentation measurements

Pierre-Etienne Bourban, Lee Ann Laurent-Applegate, Matteo Gregorio Modesto Marascio, Robin Martin, Jens Antons

Emerging 3D printing technology permits innovative approaches to manufacture cartilage scaffolds associated with layer-by-layer mechanical property adaptation. However, information about gradients of mechanical properties in human articular cartilage is li ...

2018

Comparing methodologies for structural identification and fatigue life prediction of a highway bridge

Ian Smith, Alain Nussbaumer, Sai Ganesh Sarvotham Pai

Accurate measurement-data interpretation leads to increased understanding of structural behavior and enhanced asset-management decision making. In this paper, four data-interpretation methodologies, residual minimization, traditional Bayesian model updatin ...

2018