Publications related to Stained glass

Real-time Personalized Monitoring of Neurological Disorders on Wearable Systems

The terminology of neurological disorders encompasses a range of serious illnesses (e.g., epilepsy, Alzheimer's disease) leading to morbidity, disability, and stigma. Epilepsy alone affects over 50 million people worldwide, and these figures are rising as ...

EPFL2023

ETFE and its Role in the Fabrication of Lightweight c-Si Solar Modules

Christophe Ballif, Fabiana Lisco

Glass-free, lightweight, photovoltaic modules have the potential to enable new uses of solar in building integrated and vehicle integrated applications. Glass-free modules have the advantages of reduced weight, lower-cost mounting solutions, and reduced tr ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Perceived glare from the sun behind tinted glazing: Comparing blue vs. color-neutral tints

Marilyne Andersen, Andreas Schueler, Jan Wienold, Sneha Jain, Maxime Lagier

While the influence of a glare source's spectrum on sensitivity to discomfort glare has been demonstrated repeatedly under electric light conditions, it has not yet been studied under actual daylit conditions. To investigate the influence of spectral alter ...

2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Jordi Escarre Palou, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

Modeling reflection by structured building-integrated photovoltaics

Stephen William Wasilewski

Evaluating the reflection of solar radiation by Building Integrated Photovoltaics (BIPV) with structured front-glass is challenging for two reasons. First, the resulting irregular scattering of light cannot be accounted for by simple reflection models. Sec ...

2023

Effect of window glazing color and transmittance on human visual comfort

Marilyne Andersen, Jan Wienold, Sneha Jain

: Occupants’ visual comfort in an indoor space strongly depend on the quantity and quality of the daylight inside the space which can be altered with the type of window glazing. In this study, we compared the visual comfort perception of participants with ...

2022

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Explosive fragmentation of Prince Rupert's drops leads to well-defined fragment sizes

Jean-François Molinari

Anyone who has ever broken a dish or a glass knows that the resulting fragments range from roughly the size of the object all the way down to indiscernibly small pieces: typical fragment size distributions of broken brittle materials follow a power law, an ...

Nature Research2021

Flexural behaviour of post-tensioned glass beams: Experimental and analytical study of three beam typologies

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The concept of post-tensioned glass beams builds on the concrete analogy of the reinforced glass beams. By additionally prestressing the reinforcement in a post-tensioned system, a compressive pre-stress is applied on the glass, enhancing the initial fract ...

2021

Passive diamagnetic contactless suspension rotor with electrostatic glass motor

Hannes Bleuler, Yuanping Xu, Ryosuke Kan, Jin Zhou

In this work, we introduce a newly developed passive and frictionless diamagnetic contactless suspension rotor with electrostatic glass motor. A 20 mm diameter disc-shaped rotor comprised of pyrolytic graphite with glass is fabricated. The rotor is diamagn ...

INST ENGINEERING TECHNOLOGY-IET2019

Multilevel regulation of the glass locus during Drosophila eye development

Bart Deplancke, Michael Vincent Frochaux, Abhishek Kumar Mishra

Development of eye tissue is initiated by a conserved set of transcription factors termed retinal determination network (RDN). In the fruit fly Drosophila melanogaster, the zinc-finger transcription factor Glass acts directly downstream of the RDN to contr ...

2019

Development of a novel mechanical micro-engraving method for the high-aspect-ratio microstructures of an advanced window system

André Gabriel Kostro, Josef Andreas Schuler, Jing Gong, Antoine Robert Michel Delaunay

A transparent polymer film with embedded micro mirrors is developed, and it can be attached to a window glass pane for daylighting, improving visual comfort and reducing cooling load in buildings by redirecting sunlight. Despite existing cutting-edge techn ...

2018

Hybrid laser 3D microprocessing in glass/polymer micromechanical sensor: towards chemical sensing applications

Yves Bellouard

We demonstrate the fabrication of a 3D polymer/glass micromechanical sensor by combining two femtosecond laser direct writing processes: subtractive laser-assisted chemical etching combined with additive two-photon polymerization techniques. In the first s ...

SPIE-INT SOC OPTICAL ENGINEERING2018

Non-contact femtosecond laser-based methods for investigating glass mechanics at small scales

Christos Edouardos Athanasiou

With the progress made in miniaturizing systems over the last decades, understanding materialsâ behavior at small scales has become a necessity. In this context, glass behavior has remained largely unknown, partly for technological reasons and partly due ...

EPFL2018

Laminated connections for structural glass components: a full-scale experimental study

Alain Nussbaumer, Pieter Christian Louter, Manuel Santarsiero

The use of glass material for structural components has drastically increased in the last decade. Among others, a laminated connection is a type of adhesive joint that makes use of foil interlayer adhesive to transfer forces between glass and metal parts. ...

Springer International Publishing Ag2017

Combination of additive and subtractive laser 3D microprocessing in hybrid glass/polymer microsystems for chemical sensing applications

Yves Bellouard, Matthieu Perrenoud

We present a novel hybrid glass-polymer micromechanical sensor by combining two femtosecond laser direct writing processes: laser illumination followed by chemical etching of glass and two-photon polymerization. This incorporation of techniques demonstrate ...

Optical Society of America2017

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Post-tensioned glass beams

Jagoda Cupac

Over the last few decades, the application of glass in building construction has extended from small four-side supported windowpanes to areas traditionally reserved for other materials, such as roofs, floors, staircases and full building envelopes. Glass i ...

EPFL2017

Mobile communication through insulating windows: a new type of low emissivity coating

Andreas Schueler, Olivia Valérie Charlotte Bouvard, Luc Burnier

Building materials attenuate the microwaves used for telecommunication depending on their composition and thickness. Modern windows contain glass with a metallic coating. This might cause a low quality of cell phone reception inside some buildings. In orde ...

Elsevier2017