Publications related to Calcium oxide

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

Andreas Mortensen, David Hernandez Escobar, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, Jonathan Aristya Setyadji

Dataset corresponding to the following manuscript: Slagter, A., Setyadji, J.A., Vogt, E.L. et al. Nanoindentation Hardness and Modulus of Al2O3–SiO2–CaO and MnO–SiO2–FeO Inclusions in Iron. Metall Mater Trans A (2024). https://doi.org/10.1007/s11661-024-0 ...

Zenodo2024

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Alastair Thomas Matthew Marsh, Mohsen Ben Haha, Shashank Bishnoi, Adrian Alujas Diaz, Anuj Parashar

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...

SPRINGER2022

Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

Hisham Tarek Mohamed Hafez

Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environment ...

ELSEVIER SCI LTD2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022

ECO2 framework assessment of limestone powder concrete slabs and columns

Hisham Tarek Mohamed Hafez

Producing limestone powder requires comparably far less energy than the production of ordinary Portland cement (OPC), making it a promising sustainable solution for partial replacement of OPC in concrete. Lower production energy could be translated into lo ...

ELSEVIER2022

Report of RILEM TC 267-TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, Xuerun Li, Shashank Bishnoi, Pawel Tadeusz Durdzinski, Mathieu Antoni, Anuj Parashar, Yuvaraj Dhandapani

RILEM TC 267-TRM is studying tests for the reactivity supplementary cementitious materials (SCMs). In the first phase, the lime reactivity (LR) test, which is standardised in Indian standard (IS)-1727, gave promising correlations with 90-days cement mortar ...

SPRINGER2022

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Towards tailored cement-based materials with ground calcium carbonates

Emmanuel Denarié, Lionel Sofia

Proportioning the dosage of Ground Calcium Carbonates (GCC) in cementitious materials, beyond current normative levels, is one of the most promising ways towards sustainability of mortar and concrete technology. Performance parameters such as the water/bin ...

2021

The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva, Emmanuelle Boehm Courjault

The use of supplementary cementitious materials as a partial replacement for Portland cement is the most effective way to reduce the carbon footprint of the concrete industry. Raw clays containing kaolinite (kaolin) are promising substitute materials. In t ...

SPRINGER2020

Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics

Franco Alberto Zunino Sommariva

Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...

EPFL2020

Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

Grinding aids are commonly used in cement manufacture to reduce electrostatic forces between powder particles and reduce agglomeration. Alkanolamines are known to also influence the hydration of the aluminate phases in cement. This study assessed the effec ...

2020

Reactivity and Performance of Limestone Calcined-Clay Cement (LC3) Cured at Low Temperature

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined-clay cements (LC3) take advantage of the synergetic effects of calcium carbonate reaction with the additional aluminium provided by the calcined clay. As temperature decreases, calcium carbonate solubility increase, therefore, the early- ...

SPRINGER2018

Mechanisms of the Antibacterial Effects of TiO2-FeOx under Solar or Visible Light: Schottky Barriers versus Surface Plasmon Resonance

Juan Kiwi, Sami Rtimi

This study reports the significant mechanistic difference between binary-oxide antibacterial films with the same composition but different microstructures. Binary TiO2-FeOx films were found to present a faster bacterial inactivation kinetics under visible ...

MDPI2018

Development of a new rapid, relevant and reliable (R-3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, François Henri Avet, Adrian Alujas Diaz

The present paper introduces a new rapid, relevant and reliable (R-3) test to predict the pozzolanic activity of calcined clays with kaolinite contents ranging from 0 to 95%. The test is based on the correlation between the chemical reactivity of calcined ...

Pergamon-Elsevier Science Ltd2016

Alkali uptake in calcium alumina silicate hydrate (C-A-S-H)

Karen Scrivener, Barbara Lothenbach, Émilie Michèle L'Hôpital

Uptake of the alkalis K and Na by calcium silicate hydrate (C-S-H) and calcium alumina silicate hydrate (C-A-S-H) of molar Ca/Si ratios = 0.6 to 1.6 and molar Al/Si ratio = 0 or 0.05 has been studied at 20 degrees C. Alkalis are thought to be bound in the ...

Pergamon-Elsevier Science Ltd2016

Composition, silicate anion structure and morphology of calcium silicate hydrates (C-S-H) synthesised by silica-lime reaction and by controlled hydration of tricalcium silicate (C3S)

Emmanuelle Boehm Courjault

The main product of Portland cement hydration is C-S-H. Despite constituting more than half of the volume of hydrated pastes and having an important role in strength development, very little is known about the factors that determine its morphology. To inve ...

Maney Publishing2015

Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration

Karen Scrivener, Adrian Alujas Diaz, Rodrigo Fernandez Lopez

The influence of thermal activation temperature in the pozzolanic reactivity of low grade kaolinitic clay and the impact of calcination products in OPC hydration are assessed in this paper. The raw material, with approximately 40% kaolinite and 40% of 2:1 ...

Elsevier Science Bv2015

A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste

Karen Scrivener, Cyrille Dunant, Mohsen Ben Haha, Pawel Tadeusz Durdzinski

Calcareous fly ashes are high-potential reactive residues for blended cements, but their qualification and use in concrete are hindered by heterogeneity and variability. Current characterization often fails to identify the dominant, most reactive, amorphou ...

Pergamon-Elsevier Science Ltd2015

Hydration and dimensional stability of calcium aluminate cement based systems

Julien Bizzozero

Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...

EPFL2014