Publications related to Compliant mechanism

Rectilinear translation four-bar flexure mechanism based on four Remote Center Compliance pivots

Simon Nessim Henein, Charles Baur, Loïc Benoît Tissot-Daguette, Hubert Pierre-Marie Benoît Schneegans, Quentin Gubler

This paper presents a novel planar four-bar linkage compliant mechanism (called 4-RCC) based on four flexure-based Remote Center of Compliance (RCC) pivots. With particular configurations and dimensions, the beam shortening of the RCC pivots can compensate ...

euspen2022

Highly Stretchable Flame-Retardant Skin for Soft Robotics with Hydrogel-Montmorillonite-Based Translucent Matrix

Hritwick Banerjee

Flame-retardant coatings are crucial for intelligent systems operating in high-temperature (300-800 degrees C) scenarios, which typically involve multi-joint discrete or continuous kinematic systems. These multi-segment motion generation systems call for c ...

MARY ANN LIEBERT, INC2022

Beyond Soft Hands: Efficient Grasping With Non-Anthropomorphic Soft Grippers

Yufei Hao

Grasping and manipulation are challenging tasks that are nonetheless critical for many robotic systems and applications. A century ago, robots were conceived as humanoid automata. While conceptual at the time, this viewpoint remains influential today. Many ...

FRONTIERS MEDIA SA2021

High-order based revelation of bifurcation of novel Schatz-inspired metamorphic mechanisms using screw theory

Huijuan Feng

The revelation of mechanism bifurcation is essential in the design and analysis of reconfigurable mechanisms. The first- and second-order based methods have successfully revealed the bifurcation of mechanisms. However, they fail in the novel Schatz-inspire ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Tribological Approach to the Watch Movements

Valentine Agnès Madeleine Magnin

Mechanical watches are complex and sensitive systems that have to maintain a faultless precision over their lifetime. However, this precision can be altered by disturbances occurring during the functioning time, such as friction, lubricant drying, or wear, ...

EPFL2020

Higher-order continuation method for the rigid-body kinematic design of compliant mechanisms

Simon Nessim Henein, Lennart Rubbert

Compliant mechanisms are of great interest in precision engineering. In this paper we propose a higher order continuation method to help their rigid-body kinematic design. The method helps to investigate the choice of a mechanism configuration through the ...

2017

The Design of A New Rotary Hexapod with A Single Active Degree of Freedom

Jamie Paik, Alexey Fomin

This study provides a novel approach for designing a rotary hexapod with a single actuator and definable motion of a platform. Hexapod is a parallel structure mechanism with six legs and six degrees of freedom (DoF) of an end-effector. It is not an underac ...

2017

Modelling of the human shoulder as a parallel mechanism without constraints

Alexandre Terrier, Philippe Müllhaupt, Alain Farron, David Ingram, Christoph Anselm Engelhardt

The synthesis of shoulder kinematics, either for simulation in a model or imitation in a robot, is a challenging task because of the contact between shoulder blade and ribcage. As the shoulder moves, the shoulder blade glides over the ribcage. In kinematic ...

Elsevier2016

Cognitive Loading Affects Motor Awareness and Movement Kinematics but Not Locomotor Trajectories during Goal-Directed Walking in a Virtual Reality Environment

Kamiar Aminian, Olaf Blanke, Oliver Alan Kannape, Arnaud Barré

The primary purpose of this study was to investigate the effects of cognitive loading on movement kinematics and trajectory formation during goal-directed walking in a virtual reality (VR) environment. The secondary objective was to measure how participant ...

Public Library of Science2014

Mechanical form-finding of timber fabric structures

Seyed Sina Nabaei

How about fastening a knot? not with ropes... but with timber panels. Timber Fabric Structures (TFS) originate from such an inspiration. An architectural reinterpretation of fabric techniques (mainly braiding) using building scale timber panels to design ...

EPFL2014

Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics

Aurelio Muttoni, Miguel Fernández Ruiz, Stefano Campana, Andrea Anastasi

Shear in one-way reinforced concrete (RC) members is transferred in cracked concrete members by a number of actions such as aggregate interlock, residual tensile stresses, dowelling action, inclination of compression chord and transverse reinforcement (if ...

Magazine of Concrete Research2013

A Minimal Set of Coordinates for Describing Humanoid Shoulder Motion

Alexandre Terrier, Alain Farron, David Ingram, Christoph Anselm Engelhardt

The kinematics of the anatomical shoulder are analysed and modelled as a parallel mechanism similar to a Stewart platform. A new method is proposed to describe the shoulder kinematics with minimal coordinates and solve the indeterminacy. The minimal coordi ...

Ieee2013

Concept of Modular Kinematics to Design Ultra-high Precision Parallel Robots

Murielle Richard

Miniaturisation will be the key challenge for the next decade in numerous industrial fields, such as microelectronics, optics and biomedical engineering. Although most of their products already achieve footprints of some square millimeters, the trend towar ...

EPFL2012

Towards a theoretical foundation for morphological computation with compliant bodies

Auke Ijspeert, Rolf Pfeifer

The control of compliant robots is, due to their often nonlinear and complex dynamics, inherently difficult. The vision of morphological computation proposes to view these aspects not only as problems, but rather also as parts of the solution. Non-rigid bo ...

2011

A new method for unconstrained measurement of knee joint angle and timing in alpine skiing : Comparison of crossover and crossunder turns

Kamiar Aminian, Julien Favre, Julien Chardonnens

Timing is an important part in the analysis of alpine skiing technique. Key events extracted from dynamics and kinematics of ski were previously proposed, but timing of body segments kinematics is also required to understand the biomechanics and to assess ...

2010

Design of hybrid-kinematic mechanisms for machine tools

Patric Pham

The machine tool industry is a well established, old and extremely important branch of today's manufacturing industry. With the ongoing globalization and the resulting increase of competition in this industry, the manufacturers have to push their technolog ...

EPFL2009

Real-Time Joint Coupling of the Spine for Inverse Kinematics

Ronan Boulic, Daniel Raunhardt

In this paper we propose a simple model for the coupling behavior of the human spine for an inverse kinematics framework. Our spine model exhibits anatomically correct motions of the vertebrae of virtual mannequins by coupling standard swing and revolute j ...

University of Applied Sciences Dusseldorf2008

Orion MinAngle: A flexure-based, double-tilting parallel kinematics for ultra-high precision applications requiring high angles of rotation

Reymond Clavel, Patric Pham

If you need to design ultra-high precision devices for mechanisms with multiple axes there are not a lot of ways leading around flexure-based joints. Using this type of articulations totally eliminates backlash and friction and is, by this, providing an ac ...

2005

Contribution à l'accroissement des performances du processus de µEDM par l'utilisation d'un robot à dynamique élevée et de haute précision

Cédric Joseph

Electro Discharge Machining (EDM) is an attractive subtractive method for complex 3d structurization of hard and very hard conductive and semi-conductive materials. The machining capabilities of a material do not depend on its hardness but on its electric ...

EPFL2005