Publications related to Cantilever

Silicon microresonator arrays: A comprehensive study on fabrication techniques and pH-controlled stress-induced variations in cantilever stiffness

Luis Guillermo Villanueva Torrijo, Annalisa De Pastina

We introduce a detailed design and fabrication process of Silicon microcantilever arrays for biomolecular detection in liquid environment, utilized with laser readout. We present typical fabrication problems and provide related solutions to obtain high qua ...

Elsevier2024

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

Véronique Michaud, Anastasios Vassilopoulos, Jialiang Fan

The influence of voids on the quasi-static Mode I fracture performance of thick adhesive joints was investigated in this article. Double Cantilever Beam (DCB) joints were manufactured with glass fiber reinforced epoxy adherends and SikaPower®-830 epoxy adh ...

2023

A comprehensive framework for hard-magnetic beams: Reduced-order theory, 3D simulations, and experiments

Pedro Miguel Nunes Pereira de Almeida Reis, Dong Yan, Arefeh Abbasi

Thin beams made of magnetorheological elastomers embedded with hard-magnetic particles (hard-MREs) are capable of large deflections under an applied magnetic field. We propose a comprehensive framework, comprising a beam model and 3D finite element modelin ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Analytical Studies in Support of an Improved Approach to the Design of Acceleration-Sensitive Nonstructural Elements

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

This paper summarizes a series of analytical studies that were conducted in connection with an improved approach for the design of acceleration-sensitive nonstructural elements. In the new approach, bracing to secure nonstructural elements to the structure ...

Applied Technology Council, Sponse2022

Flexural-tensegrity snapping tails for bio-inspired propulsion in fluids

Pedro Miguel Nunes Pereira de Almeida Reis, Claudio Boni

Many aquatic animals propel themselves by flapping their tails. Leveraging a recently proposed snapping cantilever beam based on the concept of flexural tensegrity, we propose a bio-inspired propulsion device. The design comprises a segmental beam with hol ...

ELSEVIER2022

Investigating Tissue Mechanics in vitro Using Untethered Soft Robotic Microdevices

Mahmut Selman Sakar, Ece Özelçi, Raquel Filipa Penacho Parreira

This paper presents the design, fabrication, and operation of a soft robotic compression device that is remotely powered by laser illumination. We combined the rapid and wireless response of hybrid nanomaterials with state-of-the-art microengineering techn ...

2021

Microfabricated nanomotion detectors for rapid cells viability tests

Anton Malovichko

The widespread use of antibiotics and antifungal drugs has provoked an increasing number of multi-resistant bacteria and fungi. The emergence of multiresistance to antibiotics has been now recognized as a very serious public health issue. In order to targe ...

EPFL2021

Shear force redistributions and resistance of slabs and wide beams

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Redistribution of shear forces in reinforced concrete members without shear reinforcement is a key aspect for the assessment of the shear capacity of wide beams and slabs. Such redistributions are due to the nonlinear response of reinforced concrete (both ...

2021

Fiber-Tip Polymer Microcantilever for Fast and Highly Sensitive Hydrogen Measurement

Giovanni Dietler, Sandor Kasas, Jiangtao Zhou, Leonardo Venturelli, Yiping Wang, Chaohui Li, Meng Zhu, Cong Xiong

Hydrogen as an antioxidant gas has been widely used in the medical and biological fields for preventing cancer or treating inflammation. However, controlling the hydrogen concentration is crucial for practical use due to its explosive property when its vol ...

AMER CHEMICAL SOC2020

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Integration of sharp silicon nitride tips into high-speed SU8 cantilevers in a batch fabrication process

Georg Fantner, Nahid Hosseini, Jonathan David Adams, Oliver Peric, Santiago Harald Andany, Matthias Neuenschwander

Employing polymer cantilevers has shown to outperform using their silicon or silicon nitride analogues concerning the imaging speed of atomic force microscopy (AFM) in tapping mode (intermittent contact mode with amplitude modulation) by up to one order of ...

Beilstein Institut2019

A novel microfabrication platform for hybrid multilayer MEMS

Nahid Hosseini

In Atomic force microscopy (AFM), the tip-sample interaction force can be measured through two primary detection techniques: optical beam detection (OBD) and electrical (self-sensing) readout. Compared to the optical method, the convenience of the self-sen ...

EPFL2019

X-Shell Pavilion: A Deployable Elastic Rod Structure

Mark Pauly, Florin Isvoranu, Tian Chen, Francis Julian Panetta, Etienne Bouleau

We present the X-Shell pavilion, a lightweight structure composed of elastic beam elements joined in a special layout that allows easy on-site deployment. The structure’s undeployed assembly configuration lies mostly flat and is easy to build, consisting o ...

Ingenta2019

Influence of ply-angle on fracture in antisymmetric interfaces of CFRP laminates

John Botsis, Georgios Pappas, Charlie Joseph Simon Blondeau

Laminated composites are prone to fracture at layer interfaces. Such damage impairs their structural response and engenders important constraints in design. In this work, the influence of ply orientation on crack growth resistance was studied for three dif ...

ELSEVIER SCI LTD2019

Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure

John Botsis, Georgios Pappas, Fernando Naya Montans

Fiber reinforced polymers (FRPs) subjected to mode I fracture show important toughening due to the development of large scale bridging (LSB). Experimental studies of this phenomenon in unidirectional carbon/epoxy laminates using double cantilever beam spec ...

ELSEVIER SCI LTD2019

Stiffness, force and drift capacity of in-plane loaded modern unreinforced brick masonry walls

Bastian Valentin Wilding

In countries of low to moderate seismicity, such as Switzerland, unreinforced masonry (URM) is mainly used in residential buildings due to its good insulation capacity and fire resistance along with a fair compressive strength. URM walls however show a lim ...

EPFL2018

PZE-transduced Suspended Microchannel Resonators for sensing applications

Annalisa De Pastina

This PhD thesis aims at developing a system which can measure the mechanical properties of fluidic samples in the picoliter range. The ultimate goal is the characterization of cancer cells and viscoelastic fluids (i.e. biological fluids), in order to study ...

EPFL2018

Position and mode dependent optical detection back-action in cantilever beam resonators

Luis Guillermo Villanueva Torrijo, Tom Larsen

Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. He ...

Institute of Physics2017

An Analytical Model for Beam Flexure Modules Based on Timoshenko Beam Theory

Simon Nessim Henein, Mohammad Hussein Kahrobaiyan, Mohamed Gamal Abdelrahman Ahmed Zanaty

Short beams are the key building blocks in many compliant mechanisms. Hence, deriving a simple yet accurate model of their elastokinematics is an important issue. Since the Euler-Bernoulli beam theory fails to accurately model these beams, we use the Timos ...

2017

Mitochondrial activity detected by cantilever based sensor

Giovanni Dietler, Sandor Kasas, Petar Stupar, Wojciech Chomicki

Our team recently demonstrated that cantilever based devices can detect signature of life in a chemistry independent manner. In this technique, the organism of interest is attached onto a classical AFM cantilever. If alive, it induces nanometre scale oscil ...

Copernicus GmbH2017