Publications related to Electrochemical reaction mechanism

Rate-Determining Step for Electrochemical Reduction of Carbon Dioxide into Carbon Monoxide at Silver Electrodes

Silver is one of the most studied electrode materials for the electrochemical reduction of carbon dioxide into carbon monoxide, a product with many industrial applications. There is a growing number of reports in which silver is implemented in gas diffusio ...

2024

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Kumar Varoon Agrawal, Lei Zhang, Kangning Zhao, Xu Xu

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wiley-V C H Verlag Gmbh2024

Tailoring nanocatalysts and reaction interfaces for water- and CO2-electrolysis

Thi Ha My Pham

Renewable energy sources offer a promising solution for mitigating sustainability and CO2 emissions-related issues due to their vast energy generation capacity. They enable hydrogen production via water electrolysis, as well as carbon capture and utilizati ...

EPFL2024

Modeling, design and economics of PEC devices

Alexandre Dominique M. Cattry

Photo-electrochemical (PEC) devices allow for converting solar energy into chemical energy and for the production of energetically dense solar fuels. Light absorption, charge separation and transport, electrochemical reactions, and ionic transport are requ ...

EPFL2024

Pathways to enhance electrochemical CO2 reduction identified through direct pore-level modeling

Sophia Haussener, Etienne Boutin, Shuo Liu, Evan Fair Johnson

Electrochemical conversion of CO2 to fuels and valuable products is one pathway to reduce CO2 emissions. Electrolyzers using gas diffusion electrodes (GDEs) show much higher current densities than aqueous phase electrolyzers, yet models for multi-physical ...

2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Development of new volcano-shaped microelectrodes for single cell electrochemistry, electrophysiology and impedance studies

Nicolas Grégoire Maïno

Micro- nano-electrodes have demonstrated superior performances in measuring attenuated intracellular action potentials from electrogenic cell cultures compared to traditional multi-electrode arrays. Yet, the understanding of the critical electrode features ...

EPFL2023

Multielectron Redox Chemistry of Uranium by Accessing the plus II Oxidation State and Enabling Reduction to a U(I) Synthon

Rosario Scopelliti, Marinella Mazzanti, Ivica Zivkovic, Anne-Sophie Chauvin

Thesynthesis of molecular uranium complexes in oxidation stateslower than +3 remains a challenge despite the interest for their multielectrontransfer reactivity and electronic structures. Herein, we report theone- and two-electron reduction of a U(III) com ...

2023

Unraveling the Effect of the Chemical and Structural Composition of ZnxNi1-xFe2O4 on the Electron Transfer at the Electrochemical Interface

Sandro Carrara, Mallikarjun Madagalam

In order to deepen the understanding of the role of transition metal oxides in electron transfer at the electrochemical interface, the performance of ZnxNi1-xFe2O4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1) nanomaterials in electrochemical sensing is studied. Nanomate ...

WILEY2023

Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis

Valery Okatenko

The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...

EPFL2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Gas/Surface reactions probed by reflection absorption infrared spectroscopy

Harmina Vejayan

In my thesis, I present an investigation of the dissociation reactions of gas phase molecules on single crystal metal surfaces studied by a molecular beam in combination with Reflection Absorption Infrared Spectroscopy (RAIRS). Two gas/surface systems were ...

EPFL2023

Monitoring and understanding Cu catalyst dissolution during CO2 electroreduction

Jan Vávra

Electrochemical reduction of carbon dioxide is a promising approach to decrease the amount of anthropogenic CO2 being released into the atmosphere, provided that a surplus of renewable electrical energy is available. Copper based materials are at the cente ...

EPFL2022

Strategic factors to design the next generation of molecular water oxidation catalysts: Lesson learned from ruthenium complexes

Mohammad Khaja Nazeeruddin

Energy conversion through sustainable means is essential to counter global warming and an urgent solution through a multidisciplinary approach is required. The temperature change stems from the emission of greenhouse gases largely contributed by burning fo ...

ELSEVIER SCIENCE SA2022

Electron probing of oxygen-evolving oxide catalysts

Tzu-Hsien Shen

Water splitting is one of the cleanest ways to store energy. The production of hydrogen and oxygen gases can be utilized in fuel cells to generate electricity, power, and heat. In the water splitting process, the oxygen evolution reaction (OER), taking pla ...

EPFL2022

Modeling and assessment of high-temperature photo-electrochemical devices

Ronald Ramiro Gutierrez Perez

In this thesis, the feasibility and performance of photo-driven electrochemical (PEC) devices working at elevated temperatures (T>700 K) is investigated and modeled. In such high-temperature PEC devices, a part of the solar spectrum is used for generating ...

EPFL2022

Stabilizing Unusual Oxidation States of Lanthanides in Molecular Complexes: Synthesis, Properties, and Reactivity

Aurélien René Willauer

The chemistry of divalent lanthanides has generated increasing interest in the past years due to their redox properties and unique reaction pathways. Notably, molecular complexes of low-valent lanthanides have been shown to be suitable one-electron reducta ...

EPFL2022

Thin film organic electrochemical transistors based on hybrid PANI/PEDOT:PSS active layers for enhanced pH sensing

Danick Briand, Silvia Demuru, Brince Paul Kunnel

We report on organic electrochemical transistors (OECTs) with active channels made of hybrid inkjet-printed poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and electropolymerized polyaniline (PANI) layers, exhibiting simultaneously impro ...

2021

Smart Portable Pen for Continuous Monitoring of Anaesthetics in Human Serum With Machine Learning

Sandro Carrara, Mandresy Ivan Ny Hanitra, Danilo Demarchi, Simone Aiassa

Continuous monitoring of anaesthetics infusion is demanded by anaesthesiologists to help in defining personalized dose, hence reducing risks and side effects. We propose the first piece of technology tailored explicitly to close the loop between anaesthesi ...

2021

Method for the preparation of a sample comprising highly polarized nuclear spins and uses and devices for such a method

Jean-Philippe Ansermet, Christophe Roussel, Jonas Milani, Mika Antero Tamski

Method for the preparation of a sample comprising highly polarized nuclear spins, comprising at least the following steps: a) bringing a polarization system, which using an electrochemical reaction can be converted into an EPR-active radical form thereof, ...

2021