Publications related to Shot peening

Proliferation-driven mechanical compression induces signalling centre formation during mammalian organ development

Localized sources of morphogens, called signalling centres, play a fundamental role in coordinating tissue growth and cell fate specification during organogenesis. However, how these signalling centres are established in tissues during embryonic developmen ...

Nature Portfolio2024

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

Experiments and proposed model for residual stresses in hot-rolled wide flange shapes

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

This paper proposes a new residual stress model for hot-rolled wide flange steel cross sections. For this purpose, a dataset of 85 residual stress measurements is first assembled. The dataset is comprised of prior measurements available in the literature t ...

2023

Geometric tolerances of welded connections with inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos, Ce Wen

Prequalified beam-to-column connections in steel moment resisting frames usually concentrate inelastic deformations in the steel beam ends. As such, nonlinear geo-metric instabilities (i.e., local buckling) may occur in these regions at modest lateral drif ...

Ernst & Sohn2023

Database of Residual Stress Measurements on Hot-rolled Wide Flange Steel Cross Sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Data_info.csv: Database of 'Residual Stress Measurements on Hot-rolled Wide Flange Steel Cross Sections' including cross-sectional and material characteristics as well as information relevant to ploting the residual stress distributions. Distributions.zip: ...

Zenodo2023

Experimental Evaluation and Modeling of Residual Stress Distributions for Hot-Rolled Wide Flange Steel Members

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Local and member instability modes in structural steel members are influenced by initial geometric imperfections and residual stresses among other parameters. The robustness of stability-related design provisions and finite element modeling procedures of s ...

2023

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach, Rafal Wróbel, Thomas Mayer

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Nanomechanical Modeling of the Bending Response of Silicon Nanowires

Yusuf Leblebici, Zuhal Tasdemir, Mohammad Nasr Esfahani, Mustafa Yilmaz

Understanding the mechanical behavior of silicon nanowiresis essentialfor the implementation of advanced nanoscale devices. Although bendingtests are predominantly used for this purpose, their findings shouldbe properly interpreted through modeling. Variou ...

AMER CHEMICAL SOC2023

FEM of stress partition during compression of WC-10 wt.% Co with realistic 3D morphology

Daniele Mari, Lucas Eric Jacques Degeneve

A Finite Element Model is developed to represent the mechanical behavior of WC-10 wt.% Co in compression tests. In this research, realistic three-dimensional model is obtained by slicing a sample by Focused Ion Beam and reconstituting it, resulting in two ...

ELSEVIER SCI LTD2022

Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties

Navid Sohrabi

Laser powder-bed fusion (LPBF) is an additive manufacturing (AM) process that uses a laser to selectively melt a powder bed. This process can build dense samples with complicated geometries from a wide variety of metallic alloys. In this thesis, LPBF of al ...

EPFL2021

Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction

Jean-Marie Drezet

Residual stresses are investigated for the first time in a dissimilar AA1050-DP450 steel magnetic pulse weld using neutron diffraction. Close to the joint interface, tensile residual stresses are observed in the Al sheet and compressive residual stresses a ...

ELSEVIER SCI LTD2021

A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening

Roland Logé, Christian Leinenbach, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an additive manufacturing technique extensively used for the production of metallic components. Despite this process has reached a status at which parts are produced with mechanical properties comparable to those from conventiona ...

Nature Portfolio2021

Morphomechanical Model Of The Torsional C-Looping In The Embryonic Heart

Alfio Quarteroni

Before septation processes shape its four chambers, the embryonic heart is a straight tube that spontaneously bends and twists breaking the left-right symmetry. In particular, the heart tube is subjected to a cell remodeling inducing ventral bending and de ...

SIAM PUBLICATIONS2021

Seed Dibbling Method for the Grow of High-Quality Diamond on GaN

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Riyaz Mohammed Abdul Khadar, Alessandro Floriduz, Reza Soleiman Zadeh Ardebili, Mehdi Naamoun

The integration of diamond and GaN has been highly pursued for thermal management purposes as well as combining their exceptional complementary properties for power electronics applications and novel semiconductor heterostructures. However, the growth of d ...

AMER CHEMICAL SOC2021

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Roland Logé, Christian Leinenbach, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

Fatigue properties of as-welded and post-weld-treated high-strength steel joints: The influence of constant and variable amplitude loads

Alain Nussbaumer, Halid Can Yildirim, Heikki Tapani Remes

In HSS welded structures, HFMI allows fatigue strength improvement factors by inducing compressive residual stresses, cold-worked surface region and modifying the weld toe shape. According to the literature, the factors are proposed based on failures at CA ...

2020

3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts

Roland Logé, Christian Leinenbach, Nikola Kalentics, Manuel Ortega Varela De Seijas

Although Selective Laser Melting (SLM) currently revolutionizes the way parts are being manufactured, certain process inherent limitations such as accumulation of residual stresses and increased porosity content can lead to a decrease in fatigue life of pr ...

ELSEVIER2020

Investigation of the effect of Laser Shock Peening in Additively Manufactured samples through Bragg Edge Neutron Imaging

Roland Logé, Markus Strobl, Nikola Kalentics

Additive manufacturing is a promising and rapidly rising technology in metal processing. However, besides a number of key advantages the constitution of a part through a complex thermo-mechanical process implies also some severe issues with the potential o ...

ELSEVIER2020

First observation of spalling in tantalum at high temperatures induced by high energy proton beam impacts

Philippe Spätig, Elvis Fornasiere, Marco Calviani

Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...

2020

3D laser shock peening as a way to improve geometrical accuracy in selective laser melting

Roland Logé, Nikola Kalentics, Andreas Burn, Michael Cloots

One of the major drawbacks of selective laser melting (SLM) is the accumulation of tensile residual stresses (TRS) in the surface and subsurface zones of produced parts which can lead to cracking, delamination, geometrical distortions, and a decrease in fa ...

SPRINGER LONDON LTD2019