Publications related to Exhaust system

The simultaneous Selective Catalytic Reduction of N2O and NO over Fe-exchanged zeolites

Iron-exchanged zeolites are industrial heterogeneous catalysts deployed to remediate anthropogenic emissions of both nitrous oxide (N2O) and nitrogen oxides (NOx = NO + NO2). Despite the extensive scientific attention received, limited knowledge is availab ...

EPFL2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Assessing the effect of O2 dithering on CH4 oxidation on Pd/Al2O3

Oliver Kröcher, Davide Ferri

Under periodic lean/rich operation generated by repeated O2 pulses (O2-dithering), the abatement of CH4 and NO is enhanced compared to static operation. However, it is not well understood how the dithering parameters (pulse amplitude and frequency) affect ...

ELSEVIER SCIENCE SA2023

Anisotropic In-Plane strain engineering Ni(OH)2 to activate alkaline hydrogen evolution reaction

Kangning Zhao, Chao Yang

Realizing a hydrogen economy strongly requires alkaline water electrolysis to achieve large-scale generation of H2, but lacks stable and efficient catalysts. The insufficient active sites in Ni(OH)2 impair the catalytic performance of alkaline HER. Herein, ...

ELSEVIER SCIENCE SA2023

Spectroscopic characterisation of TCV divertor towards a detached regime

Lorenzo Martinelli

The challenge of power exhaust of the high heat and particle fluxes foreseen for ITER and the forthcoming nuclear fusion reactors can be mitigated by operating in a detached divertor regime. This regime has been the object of three decades of studies, as i ...

EPFL2023

Optimal sensor placement for personal inhalation exposure detection in static and dynamic office environments

Dusan Licina, Seoyeon Yun

Modern health and productivity concerns related to air pollutant exposure in buildings have sparked the need for occupant-centric monitoring and ventilation control. The existing personal exposure monitoring is often restricted to stationary air quality se ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Performance assessment of a tightly baffled, long-legged divertor configuration in TCV with SOLPS-ITER

Basil Duval, Holger Reimerdes, Christian Gabriel Theiler, Guang-Yu Sun, Olivier Claude Martin Février, Claudia Colandrea

Numerical simulations explore a possible tightly baffled, long-legged divertor (TBLLD) concept in a future upgrade of the tokamak à configuration variable (TCV). The SOLPS-ITER code package is used to compare the exhaust performance of several TBLLD config ...

IOP Publishing Ltd2023

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The current study performs the thermodynamic and life-cycle assessments (LCA) of a novel charging station in two system designs. The goal is to design an efficient charging station for electric vehicles with high efficiencies and low environmental impacts ...

Nature Portfolio2023

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Artur Perek, Olivier Claude Martin Février, Mirko Wensing

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Monomeric Fe Species in Square Planar Geometry Active for Low Temperature NH3-SCR of NO

Oliver Kröcher, Davide Ferri

Monomeric Fe species in zeolites are considered to be the active sites for the low temperature activity toward ammonia-assisted selective catalytic reduction of nitrogen oxides (NH3-SCR) in exhaust gases. Herein, we report on a preparation method to synthe ...

AMER CHEMICAL SOC2022

Emission reduction by targeted transient operations in three-way catalysts for heavy-duty natural gas applications

Moyu Wang

To curb the severe effects of climate change, our society needs to radically reduce its CO2 footprint. For the heavy-duty sector, where electrification is difficult, alternative fuels can be the solution. Methane-fueled engines have lower energy-specific C ...

EPFL2022

Hydro-processing of biomass using novel metal-organic framework (MOF)/polymer composite catalysts

Vikram Vinayak Karve

Generating value, in the form of functional chemicals, from biomass is a critical need of today. It is expected that replacing petroleum with biomass as the source of many commodity and fine chemicals can lead the transition away from a fossil-fuel based e ...

EPFL2022

Intentional oxygen oscillations on Pd/Al2O3 for enhanced methane removal from the exhaust of natural gas engines

Maneka Claire Roger

Natural gas (NG) is a suitable alternative to gasoline and diesel fuels to decrease the carbon footprint of the mobility and energy sectors. Although NG is considered a fossil fuel, methane (CH4), its main component, can be produced industrially from power ...

EPFL2022

Investigation on the Role of Pd, Pt, Rh in Methane Abatement for Heavy Duty Applications

Oliver Kröcher, Davide Ferri, Moyu Wang

Methane abatement remains a challenge in aftertreatment systems of natural gas engines, currently under discussion in combination with synthetic methane. In this study, Pt/Rh and Pd/Rh-based three-way catalysts are investigated under various transient cond ...

MDPI2022

Revisiting the Impact of Morphology and Oxidation State of Cu on CO2 Reduction Using Electrochemical Flow Cell

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jing Gao, Dan Ren

Electroreduction of carbon dioxide (CO2) in a flow electrolyzer represents a promising carbon-neutral technology with efficient production of valuable chemicals. In this work, the catalytic performance of polycrystalline copper (Cu), Cu2O-derived copper (O ...

AMER CHEMICAL SOC2022

Development of an 11-channel multi wavelength imaging diagnostic for divertor plasmas in MAST Upgrade

Basil Duval, Yanis Andrebe, Artur Perek, Wouter Vijvers

Divertor detachment and alternative divertor magnetic geometries are predicted to be promising approaches to handle the power exhaust of future fusion devices. In order to understand the detachment process caused by volumetric losses in alternative diverto ...

2021

Scoping the characteristics and benefits of a connected double-null configuration for power exhaust in EU-DEMO

Holger Reimerdes, Marco Wischmeier, Mirko Wensing

A double-null configuration is being considered for the EU-DEMO, due to its potential benefits for power exhaust arising from the use of two active divertors and magnetically disconnected low- and high-field sides. Using systematic parameter scans in fluid ...

Elsevier2021

Intermolecular Pd(0)-Catalyzed Atropo-enantioselective C-H Arylation of Heteroarenes and Other Investigations into the Enantioselective Activation of Challenging C(sp3)-H Bonds

Qui-Hien Nguyen

The direct construction of stereogenic axes by enantioselective C-H arylation has been regarded as a very challenging transformation. Very few examples have been reported, despite the indisputable straight-forwardness of the methodology. This is due to the ...

EPFL2021

Power exhaust by core radiation at COMPASS tokamak

Olivier Claude Martin Février, Davide Mancini

Substantial power dissipation in the edge plasma is required for the safe operation of ITER and next-step fusion reactors, otherwise unmitigated heat fluxes at the divertor plasma-facing components (PFCs) would easily exceed their material limits. Traditio ...

IOP Publishing Ltd2021