Publications related to Poly(methyl methacrylate)

Advances in High-Speed, Multiparametric Atomic Force Microscopy

After decades of technological advancements, high-speed atomic force microscopy (HS-AFM) has emerged as a powerful technique for visualizing dynamic processes. At the nanoscale, the AFM provides valuable insights into the sample by sensing minute interacti ...

EPFL2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Nanoscale local modification of PMMA refractive index by tip-enhanced femtosecond pulsed laser irradiation

Mihai Adrian Ionescu

Tip-enhanced optical effects have enabled a wide palette of nanoscale investigation techniques and recently they were successfully used to modify and manipulate matter with nanoscale spatial resolution. We contribute to this latter area by reporting a viab ...

ELSEVIER2023

Examination of commercial ceramic coatings for the electrical insulation of Bi-2212 wire

Davide Uglietti, Andrea Testino, Robert Sobota

In the last twenty years, a number of studies have been dedicated to the development of thin ceramic coating for the electrical insulation of Ag-sheathed Bi-2212 wires. Instead of preparing a coating by mixing different compounds in house, this technical n ...

2023

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Revealing the Formation Dynamics of Janus Polymer Particles: Insights from Experiments and Molecular Dynamics

Philip Robin Loche

Seeded emulsion polymerization is one of the best-known methods for preparing polymer particles with a controlled size, composition, and shape. It first requires the preparation of seed particles, which are then swollen with additional monomer (the same as ...

Amer Chemical Soc2023

Deep Boltzmann Machines: Rigorous Results at Arbitrary Depth

Emanuele Mingione, Diego Alberici

A class of deep Boltzmann machines is considered in the simplified framework of a quenched system with Gaussian noise and independent entries. The quenched pressure of a K-layers spin glass model is studied allowing interactions only among consecutive laye ...

2021

Block Copolymer-Nanorod Co-assembly in Thin Films: Effects of Rod-Rod Interaction and Confinement

Ignacio Pagonabarraga Mora

Simulations and experiments of nanorods (NRs) show that co-assembly with block copolymer (BCP) melts leads to the formation of a superstructure of side-to-side NRs perpendicular to the lamellar axis. A mesoscopic model is validated against scanning electro ...

American Chemical Society2020

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot, Mehmet Kerem Citak, Fatma Nalan Cetin

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Reversibly Cross-Linking Polymer Brushes Using Interchain Disulfide Bonds

Harm-Anton Klok, Piotr Mocny

The introduction of interchain cross-links in surface-grafted polymer brushes increases the robustness and mechanical properties of these thin polymer films. In most cases, cross-linked polymer brushes contain permanent interchain cross-links. The use of r ...

American Chemical Society2020

1,3,2‐Diazaphospholenes Catalyze the Conjugate Reduction of Substituted Acrylic Acids

Nicolai Cramer, John Henry Reed

The potent nucleophilicity and remarkably low basicity of 1,3,2- diazaphospholenes (DAPs) is exploited in a catalytic, metal-free 1,4-reduction of free ,-unsaturated carboxylic acids. Notably, the reduction occurs without a prior deprotonation of the car ...

Wiley-VCH Verlag2020

Innovative Lab on Fiber dosimeters for ionizing radiation monitoring at ultra-high doses

Georgi Gorine, Federico Ravotti

We report on a innovative Lab on Fiber (LOF) dosimeter for ionizing radiation monitoring at ultra-high doses. The new dosimeter consists in a metallo-dielectric resonator at sub-wavelength scale supporting localized surface plasmon resonances realized on t ...

SPIE-INT SOC OPTICAL ENGINEERING2019

A Sustainable Approach to Produce Stiff, Super-Tough, and Heat-Resistant Poly(lactic acid)-Based Green Materials

Nicolas Candau, Oguzhan Oguz, Mehmet Kerem Citak, Fatma Nalan Cetin

Circumventing inherent embrittlement, poor heat resistance, and melt elasticity of poly(lactic acid) (PLA) without compromising its remarkable stiffness and strength has become a particular challenge in polymer science due to increasing demand for green ma ...

AMER CHEMICAL SOC2019

Cross-Reactive Alginate Derivatives for the Production of Dual Ionic−Covalent Hydrogel Microspheres Presenting Tunable Properties for Cell Microencapsulation

Sandrine Gerber, Aurélien Bornet, François Rémi Pierre Noverraz, Luca Szabó

The production of hydrogel micropsheres (MS) presenting physical, mechanical, and biological properties which can be modulated by their chemical composition is required to enlarge the panel of biomaterials for cell transplantation therapies. Functionalizat ...

2019

Synthesis of Loop Poly(Methyl Methacrylate) Brushes via Chain-End Postpolymerization Modification

Harm-Anton Klok, Piotr Mocny

Polymer brushes are typically densely grafted assemblies of polymer chains that are tethered via one end group to a solid substrate. Anchoring linear polymer chains via both end groups to a surface results in loop-type polymer brushes. Although loop polyme ...

American Chemical Society2019

Controlling topology, dynamics and function of polymer brushes via post-polymerization modification

Piotr Mocny

Polymer brushes are a class of thin coatings, where each of chains is tethered to the underlying substrate via one chain end. Densely grafted polymer brushes feature a stretched chain conformation, which in a unique way enhances their lubrication and non-b ...

EPFL2019

Chemically etched plastic optical fiber probe for near-field scanning optical microscopy in liquids

Giovanni Dietler, Serguei Sekatski, Anton Smirnov, Kanat Dukenbayev

Some preliminary results and experimental details of Near-field Scanning Optical Microscopy (NSOM) operation in liquids have been reported by us earlier(1-4). Here we present the first use of custom made polystyrene/poly (methyl methacrylate) (PMMA) optica ...

SPIE-INT SOC OPTICAL ENGINEERING2019

Polymer brush interfaces for protein biosensing prepared by surface-initiated controlled radical polymerization

Harm-Anton Klok, Mark Billing, Michael Badoux

Thin polymer films that are able to bind proteins are of great relevance for a wide variety of biosensor and biochip applications. Some of these applications require films that have high protein binding capacities while others call for surfaces that allow ...

2019

Fluorinated surfactants in droplet-based microfluidics: Influence of their composition on the properties of emulsion drops

Gianluca Nicolas Etienne

Miniaturization has been a driving force in many areas of science and technology, most notably in the electronics industry. Droplet-based microfluidics, a methode to produce emulsion drops in a controlled way and at high-throughputs, enables the miniaturiz ...

EPFL2019