Publications related to Quick clay

Unsupervised Electrofacies Clustering Based on Parameterization of Petrophysical Properties: A Dynamic Programming Approach

Electrofacies using well logs play a vital role in reservoir characterization. Often, they are sorted into clusters according to the self-similarity of input logs and do not capture the known underlying physical process. In this paper, we propose an unsupe ...

SOC PETROPHYSICISTS & WELL LOG ANALYSTS-SPWLA2023

Freezing-induced stiffness and strength anisotropy in freezing clayey soil: Theory, numerical modeling, and experimental validation

Gioacchino Viggiani, Edward Carlo Giorgio Andò

This paper presents a combined experimental-modeling effort to interpret the coupled thermo-hydro-mechanical behaviors of the freezing soil, where an unconfined, fully saturated clay is frozen due to a temperature gradient. By leveraging the rich experimen ...

WILEY2022

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Alastair Thomas Matthew Marsh, Mohsen Ben Haha, Shashank Bishnoi, Adrian Alujas Diaz, Anuj Parashar

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...

SPRINGER2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Karen Scrivener, Diana Londoño Zuluaga

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay

Alessio Ferrari

Compacted scaly clays are complex geomaterials widely used for the realization of dam cores and waste dump liners. This research aims to investigate the swelling/shrinkage behavior of these geomaterials subjected in an oedometric cell to complex hydromecha ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Legacy effect of green manure crops fertilized with calcium phosphite on maize production and soil properties

Alexandre Buttler, Luca Bragazza, Thomas Guillaume, Mathieu Raymond Santonja, Mario Fontana

Recycling phosphorus (P) is crucial to meet future P demand for crop production. We investigated the possibility to use calcium phosphite (Ca-Phi) waste, an industrial by-product, as P fertilizer following the oxidation of phosphite (Phi) to phosphate (Pi) ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2021

Water retention behaviour of compacted and reconstituted scaly clays

Alessio Ferrari

The paper presents the results of an experimental research devoted to investigate the response to suction variations of a scaly clay in compacted and reconstituted conditions. Different experimental techniques (axis translation, vapour equilibrium, dew poi ...

E D P SCIENCES2020

Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics

Franco Alberto Zunino Sommariva

Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...

EPFL2020

Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

Grinding aids are commonly used in cement manufacture to reduce electrostatic forces between powder particles and reduce agglomeration. Alkanolamines are known to also influence the hydration of the aluminate phases in cement. This study assessed the effec ...

2020

Hydro-mechanical response of Opalinus Clay shale: dependency on composition and burial depth

Eleonora Crisci

Shales are sedimentary formation currently studied for their involvement in many geo-energy related applications, such as radioactive waste disposal, CO2 sequestration, oil and gas extraction. In Switzerland the Opalinus Clay shale has been selected has ho ...

EPFL2019

Impacting factors and properties of limestone calcined clay cements (LC3)

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Julien Ston, Aurélie Rosine Favier, Hamed Maraghechi, Wilasinee Hanpongpun

This paper details the main factors influencing the performance of limestone calcined clay cements (LC3). The kaolinite content plays a major role in the rheological properties as well as strength development. Even in the presence of secondary phases, kaol ...

ICE PUBLISHING2019

Basic creep and autogenous shrinkage of Limestone Calcined Clay Cement (LC3)

Julien Ston

The use of supplementary cementitious materials (SCM) to lower the clinker factor of cements is now commonplace, for it benefits performance, economics and ecology. This thesis focuses on ternary blends of limestone and calcined kaolinitic clays, two very ...

EPFL2019

Hydro-mechanical behaviour of shallow Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

In Switzerland, Opalinus Clay shale has been selected as the host formation for radioactive waste disposal. The minimum required depth of the repository is related to the long-lasting isolation required for the disposal (1 million years). During this perio ...

2019

Impact of Mineralogical Composition on Geotechnical Properties of Opalinus Clay

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the selected host geomaterial for the construction of underground geological disposals for radioactive waste in Switzerland. The formation has been studied in several sites, i.e. the Mont Terri laboratory, and several boreholes in the nort ...

2019

Performance of Limestone Calcined Clay Cement (LC3) with various kaolinite contents with respect to chloride transport

Karen Scrivener, François Henri Avet, Hamed Maraghechi, Mohammadhadi Kazemi Kamyab

The durability of mortar and paste mixtures with respect to chloride ion ingress was investigated for binary blends of Portland Cement Calcined Clay, and ternary systems of Limestone Calcined Clay Cement (LC3). Five clays from various sources with differen ...

SPRINGER2018

Assessing the Effect of Calcite Impurities in Clay on Optimal Dehydroxylation Parameters for Enhanced Reactivity

Karen Scrivener, Franco Alberto Zunino Sommariva

This study focused on understanding the influence of different amounts of calcite impurities (0 to 10% by mass) on the optimal parameters for clay dehydroxylation and the reactivity of the final calcined clay. A surface response experimental design was use ...

SPRINGER2018

Autogenous Shrinkage and Creep of Limestone and Calcined Clay Based Binders

Karen Scrivener, Julien Ston, Adrien Jean Régis Maurice Hilaire

This study explored the delayed strains in limestone and calcined clay ternary blends. Autogenous shrinkage measurements are carried out over 2 months and compressive basic creep tests during 28 days after one month of curing. All tests are done using mixe ...

SPRINGER2018