Publications related to Complex analytic variety

Technology challenges and integration of the plasma position reflectometer in RFX-mod2

The integration of the new plasma position reflectometer in the RFX-mod2 experiment (the upgraded version of the previous RFX-mod that operated until 2015) is presented in this contribution. Particular attention has been devoted to the high field side subs ...

Elsevier Science Sa2024

Into the ice: Exploration and data capturing in glacial moulins by a tethered robot

Josephine Anna Eleanor Hughes, Max Mirko Polzin

Glacial moulins (cylindrical meltwater drainage shafts) provide valuable insights into glacier dynamics, but are inaccessible and hazardous environments for humans to study. Exploring them using passive sensor probes has revealed their complex geometry, wh ...

Wiley2024

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

Jean-Philippe Hogge, Francisco Sanchez

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

FENNECS: a novel particle-in-cell code for simulating the formation of magnetized non-neutral plasmas trapped by electrodes of complex geometries

Stefano Alberti, Jean-Philippe Hogge, Joaquim Loizu Cisquella, Jérémy Genoud, Francesco Romano, Guillaume Michel Le Bars

This paper presents the new 2D electrostatic particle -in -cell code FENNECS developed to study the formation of magnetized non -neutral plasmas in geometries with azimuthal symmetry. This code has been developed in the domain of gyrotron electron gun desi ...

2024

Multimaterial Volumetric Printing of Silica-Based Glasses

Christophe Moser, Paul Delrot, Damien Claude-Marie Loterie, Jorge Andres Madrid Wolff, Antoine Vincent Boniface, Roberto Arturo Emma

Silicate glasses have played a major role as structural and functional materials in human civilization since ancient Egypt. Despite their widespread use and importance in modern society, silica glasses with complex geometries are only fabricated in automat ...

Wiley2024

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Vincent Werlen

Side-by-side hybrid textiles are an intermediate step for the production of fibre-reinforced thermoplastic composites. Press moulding these materials combining reinforcing fibre textiles and thermoplastic matrix textiles or flexible layers is a promising m ...

EPFL2023

Complex Representation Learning with Graph Convolutional Networks for Knowledge Graph Alignment

Thanh Trung Huynh, Quoc Viet Hung Nguyen, Thành Tâm Nguyên

The task of discovering equivalent entities in knowledge graphs (KGs), so-called KG entity alignment, has drawn much attention to overcome the incompleteness problem of KGs. The majority of existing techniques learns the pointwise representations of entiti ...

Wiley-Hindawi2023

Analysis-aware defeaturing of complex geometries with Neumann features

Pablo Antolin Sanchez, Ondine Gabrielle Chanon

Local modifications of a computational domain are often performed in order to simplify the meshing process and to reduce computational costs and memory requirements. However, removing geometrical features of a domain often introduces a non-negligible error ...

Wiley2023

NORM TORI OF ETALE ALGEBRAS AND UNRAMIFIED BRAUER GROUPS

Eva Bayer Fluckiger, Ting-Yu Lee

Let k be a field, and let L be an etale k-algebra of finite rank. If a is an element of k(x), let X-a be the affine variety defined by N-L/k(x) = a. Assuming that L has at least one factor that is a cyclic field extension of k, we give a combinatorial desc ...

Hebrew Univ Magnes Press2023

Adaptive isogeometric methods with C-1 (truncated) hierarchical splines on planar multi-patch domains

Rafael Vazquez Hernandez

Isogeometric analysis is a powerful paradigm which exploits the high smoothness of splines for the numerical solution of high order partial differential equations. However, the tensor-product structure of standard multivariate B-spline models is not well s ...

WORLD SCIENTIFIC PUBL CO PTE LTD2023

Uncertainty Quantification by Multilevel Monte Carlo and Local Time-Stepping for Wave Propagation

Fabio Nobile

Because of their robustness, efficiency, and non intrusiveness, Monte Carlo methods are probably the most popular approach in uncertainty quantification for computing expected values of quantities of interest. Multilevel Monte Carlo (MLMC) methods signific ...

2022

Ultra-Small Bent Meta-Waveguide Filters

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper demonstrates the capability of locally resonant metamaterials (LRMs) for creating compact metallic waveguide E- and H-bends, which are simultaneously working as bandpass filters. For creating these bent meta-filters, we use composite pin-pipe wa ...

IEEE2022

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

Analysis-aware defeaturing of complex geometries

Pablo Antolin Sanchez, Ondine Gabrielle Chanon

Local modifications of a computational domain are often performed in order to simplify the meshing process and to reduce computational costs and memory requirements. However, removing geometrical features of a domain often introduces a non-negligible error ...

2022

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

Force Scaling Comparison of Transport Phenomena in Proton Exchange Membrane Fuel Cell Flow Channels

Mahbod Heidari

Liquid-gas two-phase flow in flow channels of proton exchange membrane (PEM) fuel cells has been investigated extensively in the literature; however, a comparison between the order of the magnitude of the forces occurring within the flow channels has not b ...

ASME2021

Voss surfaces: A design space for geodesic gridshells

Corentin Jean Dominique Fivet, Nicolas Robin Montagne, Olivier Baverel

The design of envelopes with complex geometries often leads to construction challenges. To overcome these difficulties, resorting to discrete differential geometry proved successful by establishing close links between mesh properties and the existence of g ...

2021

Computational Analysis and Design of Structurally Stable Assemblies with Rigid Parts

An assembly refers to a collection of parts joined together to achieve a specific form and/or functionality. Assemblies make it possible to fabricate large and complex objects with several small and simple parts. Such parts can be assembled and disassemble ...

EPFL2021

Geometry-Aware Deep Recurrent Neural Networks for Hyperspectral Image Classification

Mathieu Salzmann, Wei Wang, Siyuan Hao

Variants of deep networks have been widely used for hyperspectral image (HSI)-classification tasks. Among them, in recent years, recurrent neural networks (RNNs) have attracted considerable attention in the remote sensing community. However, complex geomet ...

2021

Tripod-Loop Metasurfaces for Terahertz-Sensing Applications: A Comparison

Bakhtiyar Orazbayev

The high electric field intensity achieved on the surface of sensors based on metasurfaces (metasensors) makes them an excellent alternative for sensing applications where the volume of the sample to be identified is tiny (for instance, thin-film sensing d ...

MDPI2020