Publications related to Magnesium

Disorder and Halide Distributions in Cesium Lead Halide Nanocrystals as Seen by Colloidal 133Cs Nuclear Magnetic Resonance Spectroscopy

Colloidal nuclear magnetic resonance (cNMR) spectroscopy on inorganic cesium lead halide nanocrystals (CsPbX3 NCs) is found to serve for noninvasive characterization and quantification of disorder within these structurally soft and labile particles. In par ...

Amer Chemical Soc2024

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars - Experimental and thermodynamic modeling

Qiao Wang

The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...

Elsevier Sci Ltd2024

Zinc carboxylate optimization strategy for extending Al-air battery system's lifetime

Andreas Züttel, Thi Ha My Pham, Liping Zhong, Manhui Wei

Although Al-air batteries are expected to be the candidates for energy conversion systems in renewable energy market due to the higher energy density, richer reserves, and lighter mass of Al metal, the anode self-discharge is seen as a notorious issue that ...

ELSEVIER SCI LTD2023

Natural aging and vacancy trapping in Al-6xxx

William Curtin, Michele Ceriotti

Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1% Mg-0.6%Si during NA are studied ...

Springer Heidelberg2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Annapaola Parrilli, Caroline Hain, Alberto Ortona, Manoj Kondibhau Naikade

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Characterization of Chemisorbed Species and Active Adsorption Sites in Mg-Al Mixed Metal Oxides for High-Temperature CO2 Capture

Berend Smit, Kevin Maik Jablonka, Susana Garcia Lopez, Christopher Patrick Ireland

Mg-Al mixed metal oxides (MMOs), derived from the decomposition of layered double hydroxides (LDHs), have been purposed as adsorbents for CO2 capture of industrial plant emissions. To aid in the design and optimization of these materials for CO2 capture at ...

AMER CHEMICAL SOC2022

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri, Mahdieh Shakoorioskooie

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

Iron phosphate mediated magnetite synthesis: a bioinspired approach

Giulia Mirabello

The biomineralization of intracellular magnetite in magnetotactic bacteria (MTB) is an area of active investigation. Previous work has provided evidence that magnetite biomineralization begins with the formation of an amorphous phosphate-rich ferric hydrox ...

ROYAL SOC CHEMISTRY2021

Atomic scale investigations of fracture in metal alloys

Eleanor Yi Kei Mak

The demand for metal alloys with superior structural performance in industrial applications continues to increase, as does the need for more-energy efficient materials and methods. Many materials that are otherwise attractive for structural applications ar ...

EPFL2021

Aggregate dissolution in different pore solutions

Mahsa Bagheri

The occurrence of cracking due to alkali silica reaction (ASR) affects the service life of concrete structures. The dissolution of silica-containing minerals within aggregates causes the formation of ASR products, which fill macroscopic cracks and cause th ...

EPFL2021

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

Roland Logé, Johann Michler, Xavier Maeder, Amit Sharma, Daniele Casari, Nicolò Maria Della Ventura

An SEM in situ uniaxial tensile testing setup allowing HR-EBSD acquisition during deformation was used to study the extension twinning mechanism in magnesium(Mg) at the micron scale. Structures were fabricated with two different crystal orientations, respe ...

2021

Zero-metallicity Hypernova Uncovered by an Ultra-metal-poor Star in the Sculptor Dwarf Spheroidal Galaxy*

Pascale Jablonka

Although true metal-free "Population III" stars have so far escaped discovery, their nature, and that of their supernovae, is revealed in the chemical products left behind in the next generations of stars. Here we report the detection of an ultra-metal-poo ...

IOP PUBLISHING LTD2021

Analysis of double cross-slip of pyramidal I < c plus a > screw dislocations and implications for ductility in Mg alloys

William Curtin, Zhaoxuan Wu, Rasool Ahmad

Solute accelerated cross-slip of pyramidal < c + a > screw dislocations has recently been recognized as a crucial mechanism in enhancing the ductility of solid-solution Mg alloys. In pure Mg, cross-slip is ineffective owing to the energy difference between ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Atomic Scale Investigations into the Origins of Ductility in Mg Alloys

Rasool Ahmad

The industrial applications of Mg, the lightest structural metal, and abundant in Earth's crust, are hampered by its low intrinsic ductility and low fracture toughness at room temperature which is attributed to the underlying less symmetric and plastically ...

EPFL2020

Intrinsic fracture behavior of Mg-Y alloys

William Curtin, Eleanor Yi Kei Mak

Pure magnesium (Mg) is an attractive metal for structural applications due to its low density, but also has low ductility and low fracture toughness. Dilute alloying of Mg with rare earth elements in small amounts improves the ductility, but the effects of ...

2020

Machine learning for metallurgy II. A neural-network potential for magnesium

William Curtin, Binglun Yin, Eleanor Yi Kei Mak

Interatomic potentials are essential for studying fundamental mechanisms of deformation and failure in metals and alloys because the relevant defects (dislocations, cracks, etc.) are far above the scales accessible to first-principles studies. Existing pot ...

2020

Design of Ductile Rare-Earth-Free Magnesium Alloys

William Curtin, Binglun Yin, Zhaoxuan Wu, Rasool Ahmad

Pure Mg has low ductility due to a transition of < c+a > pyramidal dislocations to a sessile basal-oriented structure. Dilute alloying generally improves ductility. Enhancement of pyramidal cross-slip from the lower-energy pyramidal II plane to the higher- ...

SPRINGER INTERNATIONAL PUBLISHING AG2020

Designing high ductility in magnesium alloys

William Curtin, Binglun Yin, Zhaoxuan Wu, Rasool Ahmad

The thermally activated pyramidal-to-basal (PB) transition of (c + a) dislocations, transforming glissile pyramidal dissociated core structures into sessile basal dissociated ones, lies at the origin of low ductility in pure magnesium (Mg). Solute-accelera ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Reactivity of Bioinspired Magnesium-Organic Networks under CO2 and O-2 Exposure

Klaus Kern, Magalí Alejandra Lingenfelder, Bart Willem Stel, Fernando Pablo Cometto, Daniel Eduardo Hurtado Salinas

Photosynthesis is the model system for energy conversion. It uses CO2 as a starting reactant to convert solar energy into chemical energy, i.e., organic molecules or biomass. The first and rate-determining step of this cycle is the immobilization and activ ...

2019