Publications related to High-density polyethylene

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

A comprehensive review on geomembrane systems application in hydropower

Giovanni De Cesare, Samuel Luke Vorlet

Geomembrane systems have been used at hydropower plants as rehabilitation and mitigation technology for several decades and are now used worldwide. In the context of planning an energy transition that promotes the sustainable use of water resources for ene ...

2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Sylvain Dunand, Mikaël Martino, Nicolas Würsch, Luca Massimiliano Antognini, Matthew James Large

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

Photodegradation of biodegradable plastics in aquatic environments: Current understanding and challenges

Florian Frédéric Vincent Breider, Vinhteang Kaing

Direct photolysis and indirect photolysis are important abiotic processes in aquatic environments through which plastics can be transformed physically and chemically. Transport of biodegradable plastics in water is influenced by vertical mixing and turbule ...

2023

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Development of C-C and C-O bond cleavage catalysts for the depolymerization of plastics

Wei-Tse Lee

Chemical recycling of plastics provides more flexibility for materials circulation than landfill disposal or incineration. Intensive research efforts have been devoted to maximizing the efficiency of chemical recycling through catalyst development. The fro ...

EPFL2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Colin Gomez, Vincent Werlen, Christian Rytka

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Effects of Anthropogenic Discharge and Hydraulic Deposition on the Distribution and Accumulation of Microplastics in Surface Sediments of a Typical Seagoing River: The Haihe River

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Microplastics pollution in river systems has generated great concern; however, few studies have focused on the contributions of multiple influencing factors to microplastics in river systems. In the current study, we utilized data on microplastics in surfa ...

2020

Investigation and modeling of odors release from membrane holes on daily overlay in a landfill and its impact on landfill odor control

Sami Rtimi

In the present work, we studied the NH(3)and H2S odor fluxes between the exposed working area and the HDPE covering film holes of the daily overlay in an actual landfill site with a daily operating area of 1600 m(2)in Hangzhou, China. We showed that the od ...

2021

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas, Rafal Wróbel

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020

Reversibly Cross-Linking Polymer Brushes Using Interchain Disulfide Bonds

Harm-Anton Klok, Piotr Mocny

The introduction of interchain cross-links in surface-grafted polymer brushes increases the robustness and mechanical properties of these thin polymer films. In most cases, cross-linked polymer brushes contain permanent interchain cross-links. The use of r ...

American Chemical Society2020

Probing Substrate Scope with Molecular Volcanoes

Matthew Wodrich, Anne-Clémence Corminboeuf, Boodsarin Sawatlon

Molecular volcano plots, a tool generally used to identify ideal catalysts for a given chemical transformation, are employed in an alternative fashion to examine the substrate scope by revealing the range of substrates that can be accommodated by a single ...

AMER CHEMICAL SOC2020

Composite steel beam database for seismic design and performance assessment of composite-steel moment-resisting frame systems

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady, Hammad El Jisr

This paper discusses the development of a publicly available database of composite steel beam-to-column connections under cyclic loading. The database is utilized to develop recommendations for the seismic design and nonlinear performance assessment of ste ...

2019

Controlling topology, dynamics and function of polymer brushes via post-polymerization modification

Piotr Mocny

Polymer brushes are a class of thin coatings, where each of chains is tethered to the underlying substrate via one chain end. Densely grafted polymer brushes feature a stretched chain conformation, which in a unique way enhances their lubrication and non-b ...

EPFL2019

Geodesic acoustic mode evolution in L-mode approaching the L-H transition on JET

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, , , , , , , , ,