Publications related to Flue gas

Solar-assisted clean steam generator, a cleaner production approach for sustainable healthcare facilities

Fernando Porté Agel, Mohammad Jamshidmofid, Ahmad Arabkoohsar

Healthcare sector buildings, particularly hospitals, significantly contribute to global energy consumption and greenhouse gas emissions. Hospitals require a substantial amount of steam, including the essential hygienic or " clean steam, " that is currently ...

Elsevier Sci Ltd2024

Assessing the effect of O2 dithering on CH4 oxidation on Pd/Al2O3

Oliver Kröcher, Davide Ferri

Under periodic lean/rich operation generated by repeated O2 pulses (O2-dithering), the abatement of CH4 and NO is enhanced compared to static operation. However, it is not well understood how the dithering parameters (pulse amplitude and frequency) affect ...

ELSEVIER SCIENCE SA2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier, Mohammad Andayesh, Manuele Gatti

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Intentional oxygen oscillations on Pd/Al2O3 for enhanced methane removal from the exhaust of natural gas engines

Maneka Claire Roger

Natural gas (NG) is a suitable alternative to gasoline and diesel fuels to decrease the carbon footprint of the mobility and energy sectors. Although NG is considered a fossil fuel, methane (CH4), its main component, can be produced industrially from power ...

EPFL2022

Amine Functionalization in Porous Adsorbents for Carbon Capture and Conversion

Anita Justin

Metal-organic Frameworks (MOFs) are a class of crystalline porous materials with exceptionally high surface area, chemical tunability and stability. Due to alarming CO2 emission and global concern, research is focused on developing porous materials like MO ...

EPFL2022

Monomeric Fe Species in Square Planar Geometry Active for Low Temperature NH3-SCR of NO

Oliver Kröcher, Davide Ferri

Monomeric Fe species in zeolites are considered to be the active sites for the low temperature activity toward ammonia-assisted selective catalytic reduction of nitrogen oxides (NH3-SCR) in exhaust gases. Herein, we report on a preparation method to synthe ...

AMER CHEMICAL SOC2022

Fragment ion-functional group relationships in organic aerosols using aerosol mass spectrometry and mid-infrared spectroscopy

Satoshi Takahama, Amir Yazdani, Imad El Haddad, Nikunj Dudani

Aerosol mass spectrometry (AMS) and mid-infrared spectroscopy (MIR) are two analytical methods for characterizing the chemical composition of OM. While AMS provides high-temporal-resolution bulk measurements, the extensive fragmentation during the electron ...

2022

A data-science approach to predict the heat capacity of nanoporous materials

Berend Smit, Elias Moubarak, Susana Garcia Lopez, Balázs Álmos Novotny, Seyedmohamad Moosavi, Daniele Ongari, Mehrdad Asgari, Andres Adolfo Ortega Guerrero, Özge Kadioglu

The heat capacity of a material is a fundamental property of great practical importance. For example, in a carbon capture process, the heat required to regenerate a solid sorbent is directly related to the heat capacity of the material. However, for most m ...

NATURE PORTFOLIO2022

Optimization of the Distance between Cylindrical Light Distributors Used for Interstitial Light Delivery in Biological Tissues

Georges Wagnières, Aurelien Stephen Arnaud Gregor

Cylindrical light diffusers (CLDs) are often employed for the treatment of large tumors by interstitial photodynamic therapy (iPDT) and photoimmunotherapy (PIT), which involves careful treatment planning to maximize therapeutic dose coverage while minimizi ...

MDPI2022

Regionalized Life Cycle Assessment of Food and Energy Systems

Xun Liao

To steer the sustainable transition in the food and energy sectors, reliable environmental data is required to answer environmental questions related to single agricultural crop, food product or energy technologies. Life cycle assessment (LCA) has been wid ...

EPFL2022

Thermodynamic modelling of hydrogen production in sorbent-enhanced biochar-direct chemical looping process

Hydrogen (H-2) has been widely considered the clean energy carrier of choice for emerging renewable energy generation technologies. However, H-2 is a secondary fuel mainly derived from natural gas. Over the past decades, research on developing H-2 producti ...

2022

In situ spectroscopic studies of the effect of water on the redox cycle of Cu ions in Cu-SSZ-13 during selective catalytic reduction of NOx

Oliver Kröcher, Davide Ferri, Rob Jeremiah G. Nuguid

The effect of water on the NH3-assisted selective catalytic reduction of NOx (NH3-SCR) has been largely neglected, despite the inevitable presence of water vapor in real emissions produced by fuel combustion. In this work, we investigated the role of water ...

Royal Society of Chemistry2022

Nighttime chemistry of biomass burning emissions in urban areas: A dual mobile chamber study

Athanasios Nenes, Spyros Pandis

Residential biomass burning for heating purposes is an important source of air pollutants during winter. Here we test the hypothesis that significant secondary organic aerosol production can take place even during winter nights through oxidation of the emi ...

Copernicus GmbH2021

Effects of impurities and local behavior characterization using active thermography on solid oxide electrolysis cells

Guillaume Jeanmonod

Ambitious policies are needed from every country to drastically curtail the anthropogenic emission of greenhouse gases responsible for the on-going modification of the earth's climate. A quick transition towards a society fully based on renewable materials ...

EPFL2021

Historical Changes in Seasonal Aerosol Acidity in the Po Valley (Italy) as Inferred from Fog Water and Aerosol Measurements

Athanasios Nenes, Spyros Pandis

Acidity profoundly affects almost every aspect that shapes the composition of ambient particles and their environmental impact. Thermodynamic analysis of gas-particle composition datasets offers robust estimates of acidity, but they are not available for l ...

AMER CHEMICAL SOC2021

Hybrid multiple-site mass closure and source apportionment of PM2.5 and aerosol acidity at major cities in the Po Valley

Athanasios Nenes, Spyros Pandis

This study investigates the major chemical components, particle-bound water content, acidity (pH), and major potential sources of PM2.5 in major cities (Belluno, Conegliano, Vicenza, Mestre, Padua, and Rovigo) in the eastern end of the Po Valley. The measu ...

ELSEVIER2020

Nanosecond pulsed laser-processing of CVD diamond

Patrik Willi Hoffmann, Marco Cantoni, Sébastien Equis

This work considers the resulting material structural effects of laser-processing chemical vapor deposited (CVD) diamond. The utilized 532 nm wavelength laser had a pulse duration of 40 ns together with a spot diameter of ca. 40 mu m. The effect of cutting ...

ELSEVIER SCI LTD2020

Greater Contribution From Agricultural Sources to Future Reactive Nitrogen Deposition in the United States

Athanasios Nenes, Shuai Shao

Many sensitive ecosystems in areas protected for biodiversity conservation in the United States suffer from exposure to excess reactive nitrogen (Nr) released by fossil fuel combustion and agricultural practices and deposited onto the land surface and wate ...

2020

Data-driven design of metal-organic frameworks for wet flue gas CO2 capture

Berend Smit, Pascal Alexander Schouwink, Susana Garcia Lopez, Kyriakos Stylianou, Seyedmohamad Moosavi, Peter George Boyd, Andrzej Gladysiak, Christopher Patrick Ireland, Arunraj Chidambaram, Enrique Garcia Diez

Limiting the increase of CO2 in the atmosphere is one of the largest challenges of our generation(1). Because carbon capture and storage is one of the few viable technologies that can mitigate current CO2 emissions(2), much effort is focused on developing ...

2019

Unraveling the complexity of oxygen reactions on Pt surfaces

Rainer Beck, Ana Gutiérrez González

Platinum (Pt) is a key material in automotive catalytic converters used to clean up the exhaust of the combustion engine. Pt particles in a ceramic matrix serve as an oxidation catalyst to eliminate toxic carbon monoxide (CO) and unburned hydrocarbons (CxH ...

2019