Publications related to Mineralogy

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Properties and occurrence of clay resources for use as supplementary cementitious materials: a paper of RILEM TC 282-CCL

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

The use of clays as resource of supplementary cementitious materials (SCMs) for a new generation of low-carbon cements and concretes is currently the subject of intense research efforts. To this purpose, a large number of clay resources have been explored, ...

SPRINGER2022

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

Bragg edge tomography characterization of additively manufactured 316L steel

Roland Logé, Christian Leinenbach, Nikola Kalentics, Markus Strobl, Efthymios Polatidis

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Physical characterization of fault rocks within the Opalinus Clay formation

Marie Estelle Solange Violay, Luis Felipe Orellana Espinoza, Christophe Nussbaum

Near-surface disposal of radioactive waste in shales is a promising option to safeguard the population and environment. However, natural faults intersecting these geological formations can potentially affect the long-term isolation of the repositories. Thi ...

Nature Research2022

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Inorganic and Metal-Organic Heterogeneous Catalysts for Hydrogen Energy Applications

Fatma Pelin Uran

The main focus of this thesis is the exploration of inorganic and metal-organic heterogeneous catalysts for hydrogen (H2) energy applications. In particular, we investigated metal nanoparticles (NPs) and metal-organic frameworks (MOFs) for their employment ...

EPFL2021

Beyond Tolerance Factor: Using Deep Learning for Prediction Formability of ABX3 Perovskite Structures

Mohammad Khaja Nazeeruddin, Tom Theodorus Antonius Lummen, Valentin Ianis Emmanuel Queloz, Alexander Fedorovskiy

Deep learning (DL) is a modern powerful instrument for multiple purposes, including classification. In this study, this technique is applied to the task of perovskites formability. A commonly known perovskite dataset is used to try to make an instrument su ...

2021

Composition and Pressure Effects on Partitioning of Ferrous Iron in Iron-Rich Lower Mantle Heterogeneities

Philippe Gillet, Marco Cantoni, James Badro, Susannah McGregor Dorfman, Farhang Nabiei, Charles-Edouard Boukaré

Both seismic observations of dense low shear velocity regions and models of magma ocean crystallization and mantle dynamics support enrichment of iron in Earth’s lowermost mantle. Physical properties of iron-rich lower mantle heterogeneities in the modern ...

2021

Diamond diffractive optics-recent progress and perspectives

Niels Quack, Gergely Huszka, Sichen Mi, Marcell Kristof Kiss

Diamond is an exceptional material that has recently seen a remarkable increase in interest in academic research and engineering since high-quality substrates became commercially available and affordable. Exploiting the high refractive index, hardness, las ...

WALTER DE GRUYTER GMBH2021

Importance of Nuclear Quantum Effects for NMR Crystallography

Michele Ceriotti, Venkat Kapil, Edgar Albert Engel

The resolving power of solid-state nuclear magnetic resonance (NMR) crystallography depends heavily on the accuracy of computational predictions of NMR chemical shieldings of candidate structures, which are usually taken to be local minima in the potential ...

AMER CHEMICAL SOC2021

Producing highly complicated materials. Nature does it better

Gervais Chapuis

Through the years, mineralogical studies have produced a tremendous amount of data on the atomic arrangement and mineral properties. Quite often, structural analysis has led to elucidate the role played by minor components, giving interesting insights into ...

2020

Hydration development and thermal performance of calcium sulphoaluminate cements containing microencapsulated phase change materials

Diana Londoño Zuluaga

Microencapsulated phase change materials (MPCM) incorporated in buildings walls can reduce indoor temperature fluctuations, conserving energy and enhancing thermal comfort. MPCM were incorporated in calcium sulphoaluminate cement (CSA) at high concentratio ...

Pergamon-Elsevier Science Ltd2020

Triplet grain growth in a-texture polycrystalline ZnO thin films

Cécile Hébert, Duncan Thomas Lindsay Alexander, Arthur Brian Aebersold

A growth of grain triplets is identified in vapor deposited, a-texture polycrystalline zinc oxide thin films, using a combination of transmission electron microscopy-based automated crystal orientation mapping and high-resolution imaging. Each triplet cons ...

2020

Macroscopic polarization in the nominally ergodic relaxor state of lead magnesium niobate

Dragan Damjanovic, Lukas Riemer, Yang Li, Kanghyun Chu, Brahim Dkhil

Macroscopic polarity and its dynamic response to external electric fields and temperature in the nominally ergodic relaxor phase of pristine lead magnesium niobate crystals and ceramics, Pb(Mg1/3Nb2/3)O3 (PMN), were investigated. Dynamic pyroelectric measu ...

AIP American Institute of Physics2020

Impact of Mineralogical Composition on Geotechnical Properties of Opalinus Clay

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the selected host geomaterial for the construction of underground geological disposals for radioactive waste in Switzerland. The formation has been studied in several sites, i.e. the Mont Terri laboratory, and several boreholes in the nort ...

2019

Shock-produced high-pressure (La, Ce, Th)PO4 polymorph revealed by microstructural phase heritage of monazite

Cyril Cayron

The responses of uranium-bearing accessory minerals to shock metamorphism have received growing interest, because under extreme pressure and temperature conditions, these phases can form unique microstructures and/or polymorphs and their radiometric ages c ...

GEOLOGICAL SOC AMER, INC2019

Depth of field extension through polarization aberrations

Alessandro Grosso

This paper focuses on depth of field (DOF) extension through polarization aberrations. The addition of polarizing elements into an optical system allows to exploit the polarization of the incoming light as an additional degree of freedom in the optical sys ...

SPIE-INT SOC OPTICAL ENGINEERING2019

The modern analogue of a Cretaceous coral with a calcitic skeleton

Anders Meibom, Jaroslaw Hubert Stolarski

It was argued that, in contrast to all known modern scleractinian corals that form aragonite skeletons, the original mineralogy of the Cretaceous "Coelosmilia" (ca. 70-65 Ma) was calcite during a period when the Mg2+/Ca2+ ratio of the seawater was presumab ...

2019