MS-DOSMS-DOS (ˌɛmˌɛsˈdɒs ; acronym for Microsoft Disk Operating System, also known as Microsoft DOS) is an operating system for x86-based personal computers mostly developed by Microsoft. Collectively, MS-DOS, its rebranding as IBM PC DOS, and a few operating systems attempting to be compatible with MS-DOS, are sometimes referred to as "DOS" (which is also the generic acronym for disk operating system).
Object codeIn computing, object code or object module is the product of a compiler. In a general sense object code is a sequence of statements or instructions in a computer language, usually a machine code language (i.e., ) or an intermediate language such as register transfer language (RTL). The term indicates that the code is the goal or result of the compiling process, with some early sources referring to source code as a "subject program". s can in turn be linked to form an or library file.
X86-64x86-64 (also known as x64, x86_64, AMD64, and Intel 64) is a 64-bit version of the x86 instruction set, first released in 1999. It introduced two new modes of operation, 64-bit mode and compatibility mode, along with a new 4-level paging mode. With 64-bit mode and the new paging mode, it supports vastly larger amounts of virtual memory and physical memory than was possible on its 32-bit predecessors, allowing programs to store larger amounts of data in memory.
Object fileAn object file is a computer file containing object code, that is, machine code output of an assembler or compiler. The object code is usually relocatable, and not usually directly executable. There are various formats for object files, and the same machine code can be packaged in different object file formats. An object file may also work like a shared library.
Runtime systemIn computer programming, a runtime system or runtime environment is a sub-system that exists both in the computer where a program is created, as well as in the computers where the program is intended to be run. The name comes from the compile time and runtime division from compiled languages, which similarly distinguishes the computer processes involved in the creation of a program (compilation) and its execution in the target machine (the run time). Most programming languages have some form of runtime system that provides an environment in which programs run.
Runtime libraryIn computer programming, a runtime library is a set of low-level routines used by a compiler to invoke some of the behaviors of a runtime environment, by inserting calls to the runtime library into compiled executable binary. The runtime environment implements the execution model, built-in functions, and other fundamental behaviors of a programming language. During execution (run time) of that computer program, execution of those calls to the runtime library cause communication between the executable binary and the runtime environment.
BootloaderA bootloader, also spelled as boot loader or called boot manager and bootstrap loader, is a computer program that is responsible for booting a computer. When a computer is turned off, its softwareincluding operating systems, application code, and dataremains stored on non-volatile memory. When the computer is powered on, it typically does not have an operating system or its loader in random-access memory (RAM).
Portable ExecutableThe Portable Executable (PE) format is a for executables, , DLLs and others used in 32-bit and 64-bit versions of Windows operating systems. The PE format is a data structure that encapsulates the information necessary for the Windows OS loader to manage the wrapped executable code. This includes dynamic library references for linking, API export and import tables, resource management data and thread-local storage (TLS) data. On NT operating systems, the PE format is used for EXE, DLL, SYS (device driver), MUI and other file types.
Application binary interfaceIn computer software, an application binary interface (ABI) is an interface between two binary program modules. Often, one of these modules is a library or operating system facility, and the other is a program that is being run by a user. An ABI defines how data structures or computational routines are accessed in machine code, which is a low-level, hardware-dependent format. In contrast, an application programming interface (API) defines this access in source code, which is a relatively high-level, hardware-independent, often human-readable format.
BytecodeBytecode (also called portable code or p-code) is a form of instruction set designed for efficient execution by a software interpreter. Unlike human-readable source code, bytecodes are compact numeric codes, constants, and references (normally numeric addresses) that encode the result of compiler parsing and performing semantic analysis of things like type, scope, and nesting depths of program objects. The name bytecode stems from instruction sets that have one-byte opcodes followed by optional parameters.
Entry pointIn computer programming, an entry point is the place in a program where the execution of a program begins, and where the program has access to command line arguments. To start a program's execution, the loader or operating system passes control to its entry point. (During booting, the operating system itself is the program). This marks the transition from load time (and dynamic link time, if present) to run time. For some operating systems and programming languages, the entry point is in a runtime library, a set of support functions for the language.
Linker (computing)In computing, a linker or link editor is a computer system program that takes one or more s (generated by a compiler or an assembler) and combines them into a single executable file, library file, or another "object" file. A simpler version that writes its output directly to memory is called the loader, though loading is typically considered a separate process. Computer programs typically are composed of several parts or modules; these parts/modules do not need to be contained within a single , and in such cases refer to each other by means of symbols as addresses into other modules, which are mapped into memory addresses when linked for execution.
HexadecimalIn mathematics and computing, the hexadecimal (also base-16 or simply hex) numeral system is a positional numeral system that represents numbers using a radix (base) of sixteen. Unlike the decimal system representing numbers using ten symbols, hexadecimal uses sixteen distinct symbols, most often the symbols "0"–"9" to represent values 0 to 9, and "A"–"F" (or alternatively "a"–"f") to represent values from ten to fifteen. Software developers and system designers widely use hexadecimal numbers because they provide a human-friendly representation of binary-coded values.
Memory segmentationMemory segmentation is an operating system memory management technique of dividing a computer's primary memory into segments or sections. In a computer system using segmentation, a reference to a memory location includes a value that identifies a segment and an offset (memory location) within that segment. Segments or sections are also used in s of compiled programs when they are linked together into a and when the image is loaded into memory.
Source codeIn computing, source code, or simply code, is any collection of text, with or without comments, written using a human-readable programming language, usually as plain text. The source code of a program is specially designed to facilitate the work of computer programmers, who specify the actions to be performed by a computer mostly by writing source code. The source code is often transformed by an assembler or compiler into binary machine code that can be executed by the computer.
Machine codeIn computer programming, machine code is computer code consisting of machine language instructions, which are used to control a computer's central processing unit (CPU). Although decimal computers were once common, the contemporary marketplace is dominated by binary computers; for those computers, machine code is "the binary representation of a computer program which is actually read and interpreted by the computer. A program in machine code consists of a sequence of machine instructions (possibly interspersed with data).
P-code machineIn computer programming, a p-code machine (portable code machine) is a virtual machine designed to execute p-code (the assembly language or machine code of a hypothetical central processing unit (CPU)). This term is applied both generically to all such machines (such as the Java virtual machine (JVM) and MATLAB precompiled code), and to specific implementations, the most famous being the p-Machine of the Pascal-P system, particularly the UCSD Pascal implementation, among whose developers, the p in p-code was construed to mean pseudo more often than portable, thus pseudo-code meaning instructions for a pseudo-machine.
Binary fileA binary file is a that is not a . The term "binary file" is often used as a term meaning "non-text file". Many binary s contain parts that can be interpreted as text; for example, some containing formatted text, such as files, contain the text of the document but also contain formatting information in binary form. Binary files are usually thought of as being a sequence of bytes, which means the binary digits (bits) are grouped in eights. Binary files typically contain bytes that are intended to be interpreted as something other than text characters.
Execution (computing)Execution in computer and software engineering is the process by which a computer or virtual machine reads and acts on the instructions of a computer program. Each instruction of a program is a description of a particular action which must be carried out, in order for a specific problem to be solved. Execution involves repeatedly following a 'fetch–decode–execute' cycle for each instruction done by control unit. As the executing machine follows the instructions, specific effects are produced in accordance with the semantics of those instructions.
Loader (computing)In computer systems a loader is the part of an operating system that is responsible for loading programs and libraries. It is one of the essential stages in the process of starting a program, as it places programs into memory and prepares them for execution. Loading a program involves either or copying the contents of the executable file containing the program instructions into memory, and then carrying out other required preparatory tasks to prepare the executable for running.
