Publications related to Martensite

Modeling and characterization of the nucleation and growth of carbon nanostructures in physical synthesis

Carbon nanostructures formed through physical synthesis come in a variety of sizes and shapes. With the end goal of rationalizing synthetic pathways of carbon nanostructures as a function of tunable parameters in the synthesis, we investigate how the initi ...

ELSEVIER2023

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Optical fibre based quench detection in HTS applications using machine learning classifiers

Nicolo' Riva, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

A Mach-Zehnder Interferometer (MZI) based optical fibre sensing technique, developed and patented by EPFL, is an efficient and economical way to detect hotspots in High Temperature Superconductor (HTS) applications. Due to the MZI sensitivity being a compo ...

Elsevier2022

Skyrmion Control and Phase Transitions in Cu2OSeO3

Thomas Schönenberger

Magnetic skyrmions are nanometric and non-trivial spin textures with non-zero topological charge. Their robustness against perturbations and the possibility to control them using external stimuli make them ideal candidates for future spintronic application ...

EPFL2022

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics

Helena Van Swygenhoven, Nicola Casati, Efthymios Polatidis

In situ multiaxial loading during neutron diffraction tests were undertaken on a low-alloyed Quenched and Partitioning (Q&P) Transformation Induced Plasticity (TRIP) Bainitic Ferrite (TBF) steel with dispersed austenite particles. The effect of stress tria ...

2021

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Deep Boltzmann Machines: Rigorous Results at Arbitrary Depth

Emanuele Mingione, Diego Alberici

A class of deep Boltzmann machines is considered in the simplified framework of a quenched system with Gaussian noise and independent entries. The quenched pressure of a K-layers spin glass model is studied allowing interactions only among consecutive laye ...

2021

T-cs degradation of ITER TF samples due to fast current discharges

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

Direct current tests performed in the past on the conductor samples of the toroidal field (TF) ITER coils revealed degradation of current sharing temperature, T-cs. The degradation progresses with repetitive electromagnetic loading, and also with thermal c ...

2021

Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study

Helena Van Swygenhoven, Efthymios Polatidis

An in-situ high resolution digital image correlation investigation during uniaxial tensile deformation reveals the recoverable and the non-recoverable strain mechanisms in a Ni51Ti49 alloy with a mean grain size of 35 mu m. Recoverable strain is due to the ...

2020

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron, Bo Xiao

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

What EBSD and TKD Tell Us about the Crystallography of the Martensitic B2-B19′ Transformation in NiTi Shape Memory Alloys

Cyril Cayron

The complex and intricate microstructure of B19′ martensite in shape memory nickel titanium alloys is generally explained with the Phenomenological Theory of Martensitic Crystallography (PTMC). Over the last decade, we have developed an alternative approac ...

2020

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca, Efthymios Polatidis

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Rainer Wesche

Quench protection is a critical issue for magnet using high-temperature superconducting (HTS) materials such as REBCO. For cable-in-conduit conductor (CICC) with twisted REBCO tapes, which is considered for high-current HTS conductor for fusion magnet, the ...

IEEE Institute of Electrical and Electronics Engineers2020

Variant selection in martensitic steels

Annick Pauline Baur

The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...

EPFL2019

The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading

Helena Van Swygenhoven, Efthymios Polatidis, Wei-Neng Hsu

The preferred deformation mechanisms with respect to the load path are studied in a medium stacking fault energy 304 austenitic stainless steel that exhibits both transformation induced plasticity and twinning induced plasticity. In situ neutron diffractio ...

2019

A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation

Helena Van Swygenhoven, Efthymios Polatidis

A modification to the empirical Olson-Cohen strain-induced austenite to martensite transformation kinetic model is proposed. The proposed kinetic model accounts for the stress state at the grain level and the crystallography of the transformation mechanism ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Deformation-induced martensitic transformation under multiaxial loading

Wei-Neng Hsu

The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...

EPFL2019

On the chevron morphology of surface martensite

Roland Logé, Cyril Cayron, Annick Pauline Baur

It is established that the annealing twin boundaries of austenite act as nucleation sites for the martensitic transformation. In the present study, we observe that in surface martensite the transformation only takes place for twin boundaries that are appro ...

2019

A High Resolution Digital Image Correlation Study under Multiaxial Loading

Helena Van Swygenhoven, Efthymios Polatidis, Wei-Neng Hsu

In this study, a miniaturized cruciform-shaped sample geometry which allows reaching high plastic strain under equibiaxial loading with reduced thickness at the test section is presented. The thinning method results in excellent surface quality that can be ...

SPRINGER2019