Publications related to Polymer capacitor

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an ...

Nature Portfolio2024

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Tomographic microscopy of functionally graded polymer-derived SiCN ceramics with tunable gradients

Jürgen Brugger, Lorenz Hagelüken

Polymer-derived ceramics (PDCs) are a very attractive class of materials due to their excellent properties such as resistance to high temperatures and harsh environments, adjustability of mechanical and functional behavior, and compatibility with a broad r ...

Elsevier Sci Ltd2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Inversing the actuation cycle of dielectric elastomer actuators for a facial prosthesis

Yves Perriard, Yoan René Cyrille Civet, Paolo Germano, Alexis Boegli, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Quentin Philippe Mario De Menech

Dielectric Elastomer Actuators (DEAs) are a type of smart material described as compliant capacitors. They show impressive performances as soft actuators, such as a high strain and fast response. Nonetheless, replicating natural muscle function with DEAs h ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Ece Uslu

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To addr ...

Amer Chemical Soc2023

Investigation of thermoelectric nanomaterials

David Thomas Osenberg

Thermoelectric conversion remains an active research field in light of its potential to enhance energy efficiency by waste heat recovery in a noise and wear-free manner. Nanostructuring is responsible for most of the recently reported improvements of the ...

EPFL2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

500 MHz high resolution proximity sensors with fully integrated digital counter

Giovanni Boero, Nergiz Sahin Solmaz, Reza Farsi

We report on the design and characterization of two inductive proximity sensors based on LC oscillators operating at 500 MHz. The distance from the target is obtained by measuring the oscillation frequency variation. Both sensors contain an off-chip LC res ...

ELSEVIER SCI LTD2023

A 0.21-ps FOM Capacitor-Less Analog LDO with Dual-Range Load Current for Biomedical Applications

Mahsa Shoaran, Yasemin Engür

This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfa ...

ArXiv2023

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Zenodo2023

Surface Charge Boundary Condition Often Misused in CO2 Reduction Models

Sophia Haussener, Etienne Boutin, Evan Fair Johnson

The Poisson-Nernst-Planck equations have been used to model species transport in electrochemical CO2 reduction, where the surface charge boundary condition accounts for the potential drop across the Stern layer. A direct comparison of the published models ...

AMER CHEMICAL SOC2023

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Corsin Battaglia, Rolf Erni

The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting ...

Amer Chemical Soc2023

Thermodynamics of organic electrochemical transistors

Matteo Cucchi, Hsin Tseng

Though models describing the operating mechanism of organic electrochemical transistors (OECTs) have been developed, these models are unable to accurately reproduce OECT electrical characteristics. Here, the authors report a thermodynamic-based framework t ...

Nature Portfolio2022

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Alexandre Schmid, David Palomeque Mangut

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

IEEE2022

A Generalized Phase-Shift PWM Extension for Improved Natural and Active Balancing of Flying Capacitor Multilevel Inverters

Elison de Nazareth Matioli, Georgios Kampitsis

The emergence of wide bandgap power devices has brought the attention back to the flying capacitor (FC) multilevel inverters with a large number of stages, in an effort to increase the power density by minimizing the passive components. The main challenge ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

Danick Briand, Rubaiyet Iftekharul Haque, Martin Lubej

This paper presents the design and development of a coplanar capacitive proximity sensor for the detection of the gap between the edges of dielectric foils. The finite element analysis is applied to study the design of the sensor by investigating the effec ...

2022

Condition Health Monitoring for Medium-Voltage High-Power Modular Multilevel Converter

Ignacio Alejandro Polanco Lobos

Among the policies to reduce the consequences of GHG emissions, the decarbonization of the electrical, transport, and manufacturing sectors has profoundly changed how the electricity is produced, transmitted, distributed, and consumed, particularly imposin ...

EPFL2022

Magnetic Properties of Surface Adsorbed Metal Adatoms and Dimers

Dante Philippe Sblendorio

This thesis investigates the magnetic properties of single atoms and dimers adsorbed on graphene and oxide decoupling layers supported by single crystal metal substrates, using scanning tunneling microscopy (STM) and spin-polarized scanning tunneling micro ...

EPFL2022

A Capacitively-Coupled Chopper Instrumentation Amplifier for Implantable Bridge Sensor Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents an energy and area efficient capacitively-coupled chopper instrumentation amplifier (CCIA) dedicated to implantable bridge sensor systems. Chopper stabilization is employed to decrease its offset and 1/f noise and the resulting ripple d ...

IEEE2022