Publications related to Polyethylene terephthalate

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Surface passivation and functionalisation for mass photometry

Suliana Manley, Jenny Sülzle, Laila Abdelaziz Abdelmoniem Elfeky

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing ...

Wiley2024

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Sylvain Dunand, Mikaël Martino, Nicolas Würsch, Luca Massimiliano Antognini, Matthew James Large

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

High-performance triboelectric nanogenerator via photon-generated carriers for green low-carbon system

Xin Chen

Enhancing the surface charge density and reducing the output impedance via innovative techniques are essential to accelerate the commercialization of triboelectric nanogenerators (TENGs). However, methods for increasing output performance have numerous lim ...

Elsevier2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene

John Christopher Plummer, Holger Frauenrath, Michael Alan Giffin

Semiaromatic polyamides are used for metal replacementin advancedengineering applications to reduce weight and improve efficiency,but their range of application is limited by their inherent lack ofductility and toughness. Here, we combined semiaromatic pol ...

AMER CHEMICAL SOC2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Flexible Silk-Based Graphene Bioelectronics For Wearable Multimodal Physiological Monitoring

Ata Jedari Golparvar

We introduce a skin-inspired epidermal bioelectronic patch (EBP) with unprecedented integration of graphene on silk with a facile and cost-effective fabrication process, excluding complex ink formulation. We advance the state-of-the-art by directly screen- ...

IEEE2023

Tuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo-Optical Properties

Stephen William Wasilewski, Arno Schlueter

Facades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large-scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricatin ...

Wiley2023

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Harm-Anton Klok, Véronique Michaud, Jeremy Luterbacher, Yves Leterrier, Maxime Alexandre Clément Hedou, Adrien Julien Demongeot, Graham Reid Dick, Christèle Rayroud, Thibault Rambert

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Development of C-C and C-O bond cleavage catalysts for the depolymerization of plastics

Wei-Tse Lee

Chemical recycling of plastics provides more flexibility for materials circulation than landfill disposal or incineration. Intensive research efforts have been devoted to maximizing the efficiency of chemical recycling through catalyst development. The fro ...

EPFL2022

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

Alexandre Terrier, Ehsan Sarshari, Matthieu Boubat

Purpose Concerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobili ...

SPRINGER2022

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts

Véronique Michaud, Yves Leterrier, Adrien Julien Demongeot, Joanne Hélène Vaucher-Joset

As part of a project that aims to provide people with disabilities with simple assistive devices in Colombia, the possibility of creating a PET filament that can be printed by Fused Deposition Modelling (FDM) from beverage bottle waste was investigated, wi ...

MDPI2022

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Andreas Züttel, Thi Ha My Pham, Cedric David Koolen, Wen Luo, Jie Zhang, Mo Li, Youngdon Ko, Liping Zhong

CO-selective metals (e.g., Ag) on Cu catalysts improve the selec-tivity of multi-carbon (C2+) products in electrochemical CO2 reduc-tion. However, the origin of the improvement remains unclear due to the convolution of tandem and interface effects. Here, A ...

ELSEVIER2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Jacobus Gerardus Rudolph Staal, Baris Çaglar, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Evaluation of the Effect of Backsheet Properties on PV Encapsulant Degradation under Ultraviolet-Damp-Heat Conditions

Djamel Eddine Mansour

The reliability of photovoltaic (PV) modules is highly determined by the durability of the polymeric components (backsheet and encapsulant). The power degradation and failure of PV modules can be caused by changes in the physical, chemical, and mechanical ...

EPFL2021