Publications related to Lift-to-drag ratio

Method for wind harvesting and wind rejection in flying drones

Dario Floreano, Charalampos Vourtsis, Victor Casas Rochel, Nathan Samuel Müller, William John Stewart

The present invention concerns a method of manoeuvring a vertical take-off and landing, unmanned aerial drone (100) comprising at least an aerodynamic surface (101), wherein, during a flight of the drone, the aerodynamic surface generates lift and/or drag ...

2024

Lumped Drag Model Identification and Real-Time External Force Detection for Rotary-Wing Micro Aerial Vehicles

Alcherio Martinoli, Lucas Cédric Wälti

This work focuses on understanding and identifying the drag forces applied to a rotary-wing Micro Aerial Vehicle (MAV). We propose a lumped drag model that concisely describes the aerodynamical forces the MAV is subject to, with a minimal set of parameters ...

IEEE2024

The effects of kinematics, flexibility, and planform on the vortex formation and aerodynamic performance of flapping wing flight

Alexander Gehrke

In this thesis, the aerodynamic challenges in flapping wing flight are addressed. In particular, the effects of different wing kinematics, flexibilities, and planforms on the the leading edge vortex development and aerodynamic performance are investigated. ...

EPFL2023

Earwig-inspired foldable origami wing for micro air vehicle gliding

Jamie Paik, Risa Ishiguro

Foldable wings serve as an effective solution for reducing the size of micro air vehicles (MAVs) during non-flight phases, without compromising the gliding capacity provided by the wing area. Among insects, earwigs exhibit the highest folding ratio in thei ...

Frontiers Media Sa2023

Unveiling the Rolling to Kayak Transition in Propelling Nanorods with Cargo Trapping and Pumping

Ignacio Pagonabarraga Mora

Magnetic nanorods driven by rotating fields in water can be rapidly steered along any direction while generating strong and localized hydrodynamic flow fields. Here we show that, when raising the frequency of the rotating field, these nanopropellers underg ...

AMER CHEMICAL SOC2023

Wind Defiant Morphing Drones

Dario Floreano, Charalampos Vourtsis, Victor Casas Rochel, Nathan Samuel Müller, William John Stewart

Intense winds are a challenge for vertical take-off and landing drones with wings. In particular, in the hovering regime, wings are sensitive to wind currents that can be detrimental to their operational and energetic performances. Tail-sitters are particu ...

2023

Sharp turning maneuvers with avian-inspired wing and tail morphing

Dario Floreano, Valentin Wüest, Enrico Ajanic, Mir Alikhan Bin Mohammad Feroskhan

Flight in dense environments, such as forests and cities requires drones to perform sharp turns. Although fixed-wing drones are aerodynamically and energetically more efficient than multicopters, they require a comparatively larger area to turn and thus ar ...

2022

Experimental investigation of surface roughness effect on a free-flight sphere in a Ludwieg tube

Seong-Hyeon Park

Understanding the aerodynamic coefficients of meteoroid fragments, deorbiting space debris, or launch vehicle stages through atmospheric reentry is essential for ground risk assessments. In high enthalpy flow, surface roughness is a crucial factor affectin ...

KOREAN SOC MECHANICAL ENGINEERS2022

To tread or not to tread: comparison between water treading and conventional flapping wing kinematics

Karen Ann J Mulleners, Alexander Gehrke, Swathi Badala Krishna

Hovering insects are limited by their physiology and need to rotate their wings at the end of each back-and-forth motion to keep the wing's leading edge ahead of its trailing edge. The wing rotation at the end of each half-stroke pushes the leading edge vo ...

IOP Publishing Ltd2022

All you need is time to generalise the Goman-Khrabrov dynamic stall model

Karen Ann J Mulleners, Fatma Ayancik Cinoglu

Dynamic stall on airfoils negatively impacts their aerodynamic performance and can lead to structural damage. Accurate prediction and modelling of the dynamic stall loads are crucial for a more robust design of wings and blades that operate under unsteady ...

Cambridge University Press2022

Aeroelastic characterisation of a bio-inspired flapping membrane wing

Karen Ann J Mulleners, Alexander Gehrke, Esra Uksul, Jules Ange Philippe Richeux

Natural fliers like bats exploit the complex fluid-structure interaction between their flexible membrane wings and the air with great ease. Yet, replicating and scaling the balance between the structural and fluid-dynamical parameters of unsteady membrane ...

IOP Publishing Ltd2022

Experimental quantification of unsteady leading-edge flow separation

Karen Ann J Mulleners, Julien Dominique Claude Deparday

We propose here a method to experimentally quantify unsteady leading-edge flow separation on aerofoils with finite thickness. The methodology relies on the computation of a leading-edge suction parameter based on measured values of the partial circulation ...

Cambridge University Press2022

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

Covariant formulation of relativistic mechanics

Miguel Alexandre Ribeiro Correia

Accretion disks surrounding compact objects, and other environmental factors, deviate satellites from geodetic motion. Unfortunately, setting up the equations of motion for such relativistic trajectories is not as simple as in Newtonian mechanics. The prin ...

American Physical Society2022

Accurate buoyancy and drag force models to predict particle segregation in vibrofluidized beds

Mehrdad Kiani Oshtorjani

The segregation of large intruders in an agitated granular system is of high practical relevance, yet the accurate modeling of the segregation (lift) force is challenging as a general formulation of a granular equivalent of a buoyancy force remains elusive ...

AMER PHYSICAL SOC2021

Phenomenology and scaling of optimal flapping wing kinematics

Karen Ann J Mulleners, Alexander Gehrke

Biological flapping wing fliers operate efficiently and robustly in a wide range of flight conditions and are a great source of inspiration to engineers. The unsteady aerodynamics of flapping wing flight are dominated by large-scale vortical structures tha ...

IOP PUBLISHING LTD2021

Homogenization-based design of microstructured membranes: wake flows past permeable shells

François Gallaire, Edouard Boujo, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna

A formal framework to characterize and control/optimize the flow past permeable membranes by means of a homogenization approach is proposed and applied to the wake flow past a permeable cylindrical shell. From a macroscopic viewpoint, a Navier-like effecti ...

Cambridge University Press2021

Insect Inspired Self-Righting for Fixed-Wing Drones

Dario Floreano, Charalampos Vourtsis, Victor Casas Rochel, William John Stewart

Micro Aerial Vehicles (MAVs) are being used in a wide range of applications such as surveillance, reconnaissance, inspection, and search and rescue. However, due to their size and mission profiles, they are prone to tipping over, jeopardizing their operati ...

2021

The dynamics and timescales of static stall

Karen Ann J Mulleners, Sébastien Le Fouest, Julien Dominique Claude Deparday

Airfoil stall plays a central role in the design of safe and efficient lifting surfaces. We typically distinguish between static and dynamic stall based on the unsteady rate of change of an airfoil’s angle of attack. Despite the somewhat misleading denotat ...

2021

On the numerical simulation of a confined cavitating tip leakage vortex under geometrical and operational uncertainties

Mohamed Farhat

The effects of operational and geometrical uncertainties on Tip Leakage Vortex (TLV) characteristics are investigated in the current research. Geometrical uncertainties are comprised of manufacturing tolerances or gradual geometry degradation over the time ...

PERGAMON-ELSEVIER SCIENCE LTD2021