Publications related to Gas-cooled fast reactor

Integrated modelling of neon impact on JET H-mode core plasmas

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

A holistic investigation of photocatalytic hydrogen generation

Sangram Ashok Savant

Photocatalytic (PC) solar hydrogen production is a promising way to provide green hydrogen using only sunlight and abundant reactants such as water. PC approaches use catalytically active semiconductor particles suspended in liquid electrolytes. The partic ...

EPFL2023

Thermodynamic modelling of hydrogen production in sorbent-enhanced biochar-direct chemical looping process

Hydrogen (H-2) has been widely considered the clean energy carrier of choice for emerging renewable energy generation technologies. However, H-2 is a secondary fuel mainly derived from natural gas. Over the past decades, research on developing H-2 producti ...

2022

Enhanced Solar-to-Fuel Efficiency of Ceria-Based Thermochemical Cycles via Integrated Electrochemical Oxygen Pumping

Sophia Haussener, Clemens Gregor Suter, Meng Lin

The solar thermochemical cycle based on ceria is a promising route for renewable fuel production. The solar-to-fuel efficiency of a thermochemical reactor is highly dependent on the oxygen removal during the reduction step. Conventional nitrogen sweeping ( ...

AMER CHEMICAL SOC2022

Validation of spent nuclear fuel decay heat calculations using Polaris, ORIGEN and CASMO5

Andreas Pautz, Dimitri Rochman, Stefano Caruso

Decay heat calculations of spent nuclear fuel (SNF) using Polaris and ORIGEN codes in the SCALE code sys-tem, and CASMO5 code, are validated using measurements from the Clab and GE-Morris facilities. Multiple hypothesis testing, relying on permutations and ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Flexibilisation of Biogas-Based Power-to-Gas Processes: A Techno-Economic and Experimental Assessment

Andreas Gantenbein

Biogas-based power-to-X technology allows storing renewable electricity, while producing CO2-neutral products. This work investigates the conversion and upgrading of digestion-derived gas mixtures with focus on increasing the operational flexibility of the ...

EPFL2022

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

X-point radiation, its control and an ELM suppressed radiating regime at the ASDEX Upgrade tokamak

Marco Wischmeier, Bernhard Sieglin

Future fusion reactors require a safe, steady state divertor operation. The required detached operation is, in tokamaks with metal walls, usually achieved by seeding of impurities, such as nitrogen. With strong seeding levels, the dominant radiation is emi ...

IOP Publishing Ltd2021

Prospects and challenges in designing photocatalytic particle suspension reactors for solar fuel processing

Sophia Haussener, Swarnava Nandy, Sangram Ashok Savant

Photocatalytic approaches for the production of solar hydrogen or hydrocarbons are interesting as they provide a sustainable alternative to fossil fuels. Research has been focused on water splitting and on the synthesis of photocatalyst materials and compo ...

2021

Drift-related transport and plasma-neutral interaction in the TCV divertor

Mirko Wensing

Thermonuclear fusion of light atoms is the primary energy source of stars, such as our Sun, that led to the emergence of life on Earth. However, its economic exploitation as a virtually unlimited and clean energy source is yet to be developed. One of the m ...

EPFL2021

Modeling the response of a diamond detector in the zero power reactor CROCUS

Andreas Pautz, Vincent Pierre Lamirand, Pavel Frajtag, Mathieu Hursin, DongHyuk Lee

The present manuscript documents the development of a practical calculation scheme to model the response of a diamond detector in the mixed (neutron and gamma) radiation field of the CROCUS experimental reactor at EPFL. The model is shown to perform reason ...

SPRINGER HEIDELBERG2021

Statistical Burnup Distribution of Moving Pebbles in the High-Temperature Reactor HTR-PM

Andreas Pautz, Jiri Krepel, Fanny Vitullo, Horst-Michael Prasser

In the pebble-bed high-temperature reactor under construction in China, called the HTR-PM, the spherical fuel elements continuously flow downward in the cylindrical core. The burnup of each pebble is checked at the core outlet and, according to the achieve ...

ASME2020

Isotope dependence of energy, momentum and particle confinement in tokamaks

Henri Weisen, Michele Marin, Yann Camenen, Javier García Hernández

The isotope dependence of plasma transport will have a significant impact on the performance of future D-T experiments in JET and ITER and eventually on the fusion gain and economics of future reactors. In preparation for future D-T operation on JET, dedic ...

Cambridge University Press2020

SCALE/AMPX multigroup libraries for sodium-cooled fast reactor systems

Andreas Pautz, Winfried Zwermann, Friederike Bostelmann

New multigroup cross section libraries and associated covariance files that are optimized for the analysis of sodium-cooled fast reactors were generated with the AMPX tools distributed with the SCALE code system. These new libraries account for the fast ne ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Design of the third-generation neutron spallation target for the CERN's n_TOF facility

Raffaele Esposito, Marco Calviani

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, ...

IOS PRESS2020

A coarse-mesh methodology for modelling of single-phase thermal-hydraulics of ESFR innovative assembly design

Andreas Pautz, Konstantin Mikityuk, Carlo Fiorina, Stefan Radman

The GeN-Foam multi-physics code enables coupled thermal-hydraulic, neutronic, and thermal-mechanical analysis of fast reactor cores with 3-D unstructured deformable meshes. Advances within the Horizon2020 ESFR-SMART project, as well as trends towards highe ...

ELSEVIER SCIENCE SA2019

Effects of collisionality and T e /T i on fluctuations in positive and negative δ tokamak plasmas

Olivier Sauter, Ambrogio Fasoli, Stefano Coda, Stephan Brunner, Laurie Porte, Gabriele Merlo, Matteo Fontana, Ajay Chandrarajan Jayalekshmi

The effects of negative triangularity () on confinement and fluctuations in plasmas covering a large range of parameters were investigated on the tokamak à configuration variable (TCV). The conditions explored in this paper include discharges where neutral ...

IOP Publishing Ltd2019

H-mode grade confinement in L-mode edge plasmas at negative triangularity on DIII-D

Olivier Sauter, Alessandro Marinoni, Sung Chul Park

Plasmas with a negative triangularity shape have been created on the DIII-D tokamak that, despite maintaining standard L-mode edge radial profiles, reach volume averaged pressure levels typical of H-mode scenarios. Within the auxiliary power available for ...

2019

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Henri Weisen, Alessandro Pau, Federico Nespoli, Cristian Sommariva, David Pfefferlé, Richard Pitts, Jonathan Marc Philippe Faustin, Yann Camenen, Hamish William Patten, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Samuel Lanthaler, Bernhard Sieglin, Otto Asunta

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create ne ...

Elsevier2019

GEN-FOAM: An OpenFOAM (R)-Based Multi-physics Solver for Nuclear Reactor Analysis

Carlo Fiorina

A multi-physics solver for nuclear reactor analysis, named GeN-Foam (Generalized Nuclear Foam), has been developed by the Laboratory for Reactor Physics and System Behavior at the EPFL and at the Paul Scherrer Institut (Switzerland). The developed solver c ...

SPRINGER INTERNATIONAL PUBLISHING AG2019