Publications related to Plasma polymerization

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Water: its influence on the formation and crystallization of amorphous calcium carbonate

Huachuan Du

Nature produces CaCO3-based materials that display fascinating mechanical properties. These properties are a result of the exquisite control over the formation of CaCO3 crystals that nature possesses. Such a high level of control is likely achieved, at lea ...

EPFL2019

Controlling topology, dynamics and function of polymer brushes via post-polymerization modification

Piotr Mocny

Polymer brushes are a class of thin coatings, where each of chains is tethered to the underlying substrate via one chain end. Densely grafted polymer brushes feature a stretched chain conformation, which in a unique way enhances their lubrication and non-b ...

EPFL2019

Mechanochemistry-assisted hydrolysis of softwood over stable sulfonated carbon catalysts in a semi-batch process

Frédéric Vogel, Oliver Kröcher, David Ferdinand Scholz

The hydrolysis of lignocellulose is the first step in saccharide based bio-refining. The recovery of homogeneous acid catalysts imposes great challenges to the feasibility of conventional hydrolysis processes. Herein, we report a strategy to overcome these ...

2019

Synthesis and Postpolymerization Modification of Fluorine-End-Labeled Poly(Pentafluorophenyl Methacrylate) Obtained via RAFT Polymerization

Harm-Anton Klok, Claudia Battistella, Jie Chen

Chain-end-labeled polymers are interesting for a range of applications. In polymer nanomedicine, chain-end-labeled polymers are useful to study and help understand cellular internalization and intracellular trafficking processes. The recent advent of fluor ...

2018

Photocatalytic performance of TiO2 impregnated polyester for the degradation of Reactive Green 12: Implications of the surface pretreatment and the microstructure

Sami Rtimi

In the present work, we investigate the degradation of recalcitrant industrial textile dye (Reactive green 12) in aqueous solution by TiO2 impregnated polyester at room temperature. The TiO2 loading on polyester was optimized using different polyester pret ...

Elsevier2017

Avoiding compositional drift during the RAFT copolymerization of N-(2-hydroxypropyl)methacrylamide and N-acryloxysuccinimide: towards uniform platforms for post-polymerization modification

Harm-Anton Klok, John Moraes, Hedi Ketari, Ioana-Maria Simionca

Controlled radical polymerization techniques such as RAFT allow fine control over polymer molecular weight and architecture. These techniques, however, do not eliminate compositional drifts in copolymerizations, which are the consequence of differences in ...

Royal Society of Chemistry2015

Characterization of the Network Structure of PEG Diacrylate Hydrogels Formed in the Presence of N-Vinyl Pyrrolidone

Jeffrey Alan Hubbell, Nicola Tirelli

PEGDA hydrogels copolymerized with NVP using free-radical photopolymerization are used in biomedical applications. These networks consist of a poly(acrylate-co-vinyl pyrrolidone) backbone crosslinked with PEG chains whose crosslink density is dependent on ...

Wiley-V C H Verlag Gmbh2014

Polymer Brush Gradients Grafted from Plasma-Polymerized Surfaces

Harm-Anton Klok, Tugba Bilgiç Tune

A new method for generating a surface density gradient of polymer chains is presented. A substrate-independent polymer deposition technique was used to coat materials with a chemical gradient based on plasma copolymerization of 1,7-octadiene and allylamine ...

Amer Chemical Soc2014

Synthesis of Responsive Polymer Brushes for Sensing Applications

Nicolas Bertrand Schüwer

During the past decades the field of sensors has been subject to much attention due to an increased demand for (bio)sensors and environmental monitoring. The efforts have been concentrated to create sensors which are reliable, highly sensitive and selectiv ...

EPFL2011

Side-Chain Peptide-Synthetic Polymer Conjugates via Tandem "Ester-Amide/Thiol-Ene" Post-Polymerization Modification of Poly(pentafluorophenyl methacrylate) Obtained Using ATRP

Harm-Anton Klok, Maarten Danial, Matthew Gibson

Herein the concept of tandem postpolymerization modification as a versatile route to synthesize well-defined, highly functionalized polymers is introduced. Poly(pentafluorophenyl methacrylate) obtained by atom transfer radical polymerization was first modi ...

American Chemical Society2011

(Y0.5Lu0.5)2O3:Eu3+ nanopowders: Combustion synthesis, structure and optical properties

Barbora Bártová

In this work we explored the possibility of obtaining nanocrystalline (Y0.5Lu0.5)2O3 powders, doped with europium and co-doped with praseodium, employing polymer complex solution synthesis. Polyethylene glycol, with average molecular weight 200, served bot ...

2010

Radical homo-and copolymerization of acrylamide and ionic monomers in weak magnetic field

Jutta Christine Wandrey, Ignacio Rintoul

The synergy between magnetic ﬁeld (MF) and electrostatic interactions on the kinetics of radical homopolymerization of acrylamide (AM), acrylic acid (AA), its ionized form acrylate (A ...

2008

Dark curing kinetics of UV printing inks by real-time ATR-FTIR spectroscopy

Eric Jacques Nouzille

In UV-curable printing technology, an ink or a varnish is exposed to the UV-light source within a fraction of a second. Subsequent polymerization therefore proceeds in the dark, referred to as dark curing. Because dark curing can be critical and contribute ...

EPFL2007

High-temperature radical polymerization of methyl methacrylate in a continuous pilot scale process

Philip Nising

The present PhD thesis deals with the high temperature polymerization of methyl methacrylate in a continuous pilot scale process. The major aim is to investigate the feasibility of a polymerization process for the production of PMMA molding compound at tem ...

EPFL2006

Magnetic and electrostatic effects on the polymerization of water-soluble monomers

Ignacio Rintoul

Free radical polymerization is the most frequently used technique to produce synthetic polymers. They represent more than 25% of the total volume of materials made by the mankind. 3% thereof correspond to water soluble polymers with annual growth rates est ...

EPFL2006

Development of a novel drug delivery system based on polymeric, thermoresponsive, hydrogel nanoparticles

Carrier-mediated drug delivery has emerged as a powerful methodology for the treatment of various pathologies. The therapeutic index of traditional and novel drugs is enhanced via the increase of specificity due to targeting of drugs to a particular tissue ...

EPFL2005

Polymer microchips bonded by O2-plasma activation

Hubert Girault, Joël Stéphane Rossier, Nicolas Xanthopoulos

This paper presents a fabrication of polymer microchips with homogeneous material technique due to surface treatment by plasma before sealing. UV laser photoablation was used for fast prototyping of microstructures, and oxygen plasma was used as a surface ...

2002