Publications related to Buckypaper

Centimeter-scale gas-sieving nanoporous single-layer graphene membrane

Kumar Varoon Agrawal, Luc Sébastien Bondaz, Mostapha Dakhchoune, Shiqi Huang, Guangwei He, Wan-Chi Lee

High-permeance, molecular-sieving, nanoporous single-layer graphene (NSLG) membranes are highly promising for gas separation. However, the formation of cracks during the transfer of NSLG to a low-cost porous support is difficult to avoid. These cracks are ...

2020

Computational Design of Auxetic Shells

Mina Konakovic Lukovic

Recent advances in material science and digital fabrication provide promising opportunities for product design, mechanical and biomedical engineering, robotics, architecture, art, and science. Engineered materials and personalized fabrication are revolutio ...

EPFL2019

Growth of CNT Forests on Titanium Based Layers, Detailed Study of Catalysts

László Forró, Endre Horvath, Pavao Roko Andricevic, Klara Hernadi

For better electrical contacts of potential devices, growth of vertically aligned carbon nanotubes (CNT forests) directly onto conductive substrates is an emerging challenge. Here, we report a systematic study on the CCVD synthesis of carbon nanotube fores ...

FRONTIERS MEDIA SA2018

Three-Dimensionally Enlarged Photoelectrodes by a Protogenetic Inclusion of Vertically Aligned Carbon Nanotubes into CH3NH3PbBr3 Single Crystals

László Forró, Endre Horvath, Andrzej Sienkiewicz, Bálint Náfrádi, Pavao Roko Andricevic, Márton Kollár, Xavier François Mettan, Klara Hernadi

We demonstrate that single crystals of methylammonium lead bromide (MAPbBr(3)) could be grown directly on vertically aligned carbon nanotube (VACNT) forests. The fast-growing MAPbBr3 single crystals engulfed the protogenetic inclusions in the form of indiv ...

2017

Rapid carbon nanotubes suspension in organic solvents using organosilicon polymers

Jürgen Brugger, Jonas Grossenbacher, Rosario Maurizio Gullo

A strategy for a simple dispersion of commercial multi-walled carbon nanotubes (MWCNTs) using two organosilicones, polycarbosilane SMP10 and polysilazane Ceraset PSZ20, in organic solvents such as cyclohexane, tetrahydrofuran (THF), m-xylene and chloroform ...

Elsevier2016

Large scale inkjet-printing of carbon nanotubes electrodes for antioxidant assays in blood bags

Hubert Girault, Niels Erik Lion, Andreas Stephan Lesch, Fernando Cortes Salazar, Michel Prudent

Herein, we present the large scale fabrication of carbon nanotubes (CNT) electrodes supported on flexible polymeric sheets by subsequent multilayer inkjet printing of a silver layer for electrical connection, CNT layers as active electrode material and an ...

Elsevier2014

Horizontal growth of dense carbon nanotube membranes for interconnects and sensors

Mihai Adrian Ionescu, Hoël Maxime Guérin

Dense array of horizontal carbon nanotubes (CNTs) connected to electrodes is a basic building block for devices in a wide field of applications such as interconnect lines or micro-electromechanical systems (MEMS) for sensing for instance. For interconnects ...

2013

In-situ grown horizontal carbon nanotube membrane

Mihai Adrian Ionescu, Dimitrios Tsamados, Hoël Maxime Guérin

We present the successful fabrication of horizontally grown and dense carbon nanotube (CNT) membranes in situ. A TiN/Al2O3/TiN stack is first patterned to be employed as a support for the CNT growth. Iron is then evaporated with a 45 degrees tilt angle on ...

Elsevier2012

Carbon Nanotubes With Different Orientations for Electrochemical Biodevices

Giovanni De Micheli, Sandro Carrara, Irene Taurino

Carbon nanotubes (CNTs) improve the sensitivity of electrochemical biosensors. An optimized CNT/trasducer inte- gration is required to realize accurate devices. The nanotube orientation on the sensor electrode is a key parameter. The role of the sidewalls ...

Institute of Electrical and Electronics Engineers2012

Comparison of Two Different Carbon Nanotube-based Surfaces with Respect to Potassium Ferricyanide Electrochemistry

Giovanni De Micheli, Sandro Carrara, Irene Taurino

This paper describes the electrochemical investigation of two multi-walled carbon nanotube-based electrodes using potassium ferricyanide as a benchmark redox system. Carbon nanotubes were fabricated by chemical vapor deposition on silicon wafer with campho ...

2012

Photocatalytic activity of TiO2/SWCNT and TiO2/MWCNT nanocomposites with different carbon nanotube content

László Forró, Arnaud Magrez, Klara Hernadi

With different mass ratios, titanium dioxide/carbon nanotube (0.1-10 wt% CNTcontent) nanocomposites were prepared with the aid of ultrasonication method. The structures of the various TiO2/CNT nanocomposites were characterized by electron microscopy (scann ...

2011

Comparing the enhanced sensing interfaces of differently oriented carbon nanotubes onto silicon for bio-chip applications

Giovanni De Micheli, Sandro Carrara, Irene Taurino

Carbon nanotubes improve the sensitivity of electrochemical biochips. An optimized integration of the nano/bio/CMOS interface is required to realize accurate and low-cost sensors for applications in personalized medicine. The nanotubes orientation on the c ...

2011

Are Carbon Nanotube Effects on Green Algae Caused by Shading and Agglomeration?

Arnaud Magrez, Laura Sigg

Due to growing production, carbon nanotubes (CNT) may soon be found in a broad range of products and thus in the environment. In this work, an algal growth test was developed to determine effects of pristine and oxidized CNT on the green algae Chlorella vu ...

2011

Tunable MEMS capacitors using vertical carbon nanotube arrays grown on metal lines

Mihai Adrian Ionescu, Montserrat Fernandez-Bolanos Badia, Donatello Acquaviva, Anupama Arun

In this work, tunable MEMS capacitors are realized using a vertically grown carbon nanotube array. The vertical CNT array forms an effective CNT membrane, which can be electrostatically actuated like the conventional metal plates used in MEMS capacitors. T ...

2010

Multi-walled carbon nanotubes functionalized by carboxylic groups: Activation of TiO2 (anatase) and phosphate olivines (LiMnPO4; LiFePO4) for electrochemical Li-storage

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ladislav Kavan, Florian Le Formal

Multi-walled carbon nanotubes functionalized by carboxylic groups, exhibit better affinity towards TiO2 (P90, Degussa) as compared to that of pristine nanotubes. Also the electrochemical performance of TiO2 is improved by nanotube networking, but the Li-st ...

Elsevier2010

Capacitive nanoelectromechanical switch based on suspended carbon nanotube array

Mihai Adrian Ionescu, László Forró, Arnaud Magrez, Didier Bouvet, Rita Smajda, Donatello Acquaviva, Anupama Arun

We present the fabrication and high frequency characterization of a capacitive nanoelectromechanical system (NEMS) switch using a dense array of horizontally aligned single-wall carbon nanotubes (CNTs). The nanotubes are directly grown onto metal layers wi ...

American Institute of Physics2010

Nano-Electro-Mechanical Switches Based on Carbon Nanotubes Arrays

Donatello Acquaviva

In the last forty years the semiconductor industry focused on the downscaling process of the CMOS (Complementary Metal-Oxide-Semiconductor) technology, trying to follow as much as possible the empirical Moore's Law. In the last five years this trend has be ...

EPFL2010

In-situ Laue diffraction on deforming micropillars

Single crystal deformation unveiling the characteristics of crystal glide and the role of defect propagation herein has been a matter of intense research more than 60 years ago. A manifold of different mechanical testing methods and crystal qualities were ...

EPFL2009

Carbon nanotubes functionalized with dye molecules and metal nanoparticles

Tilman Assmus

Single-walled carbon nanotubes are highly interesting quasi one-dimensional nanostructures. They possess a multitude of fascinating optical, mechanical and electrical properties, which can be even further expanded through appropriate functionalization stra ...

EPFL2008

Trapping Individual Carbon Nanotubes

Mihai Adrian Ionescu, Anupama Arun

A technique to deterministically manipulate individual Carbon Nanotubes (CNT) has been the brick-wall for the boom of CNT based devices. Here we demonstrate dielectrophoresis as an efficient technique to trap individual Single Walled Carbon Nanotubes (SWCN ...

2008