Publications related to Lime mortar

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars - Experimental and thermodynamic modeling

Qiao Wang

The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...

Elsevier Sci Ltd2024

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Unidirectional penetration approach for characterizing sulfate attack mechanisms on cement mortars and pastes

Karen Scrivener, Qiao Wang, William Wilson

Degradation of cementitious materials by sulfate ions is commonly classified into chemical and physical sulfate attack. So-called "physical" attack dominates in many field situations, but laboratory testing focuses on "chemical" attack under full-immersion ...

Pergamon-Elsevier Science Ltd2023

Atomic-Level and Surface Structure of Calcium Silicate Hydrate Nanofoils

Karen Scrivener, Paul Bowen, Aslam Kunhi Mohamed, Ziga Casar

Deciphering the calcium silicate hydrate (C-S-H) surface is crucial for unraveling the mechanisms of cement hydration and property development. Experimental observations of C-S-H in cement systems suggest a surface termination which is fundamentally differ ...

AMER CHEMICAL SOC2023

Going Below 50% Clinker Factor in Limestone Calcined Clay Cements (LC3): A Comparison with Pozzolanic Cements from the South American Market

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined clays are a promising technology as they offer similar performance to OPC from 7 days onwards, while enabling a reduction of the clinker content of 50%. In some regions of the world like South America, pozzolanic cements (i.e., blended c ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Investigation of phase formation, microstructure and mechanical properties of LC3 based autoclaved aerated blocks

Karen Scrivener

This study investigates the microstructure, phase formation, and mechanical properties of LC3-50 based auto-claved aerated blocks. The microstructure and phase formation is studied using SEM-EDS and X-ray diffraction techniques. The fresh and hardened prop ...

ELSEVIER SCI LTD2022

Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

Hisham Tarek Mohamed Hafez

Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environment ...

ELSEVIER SCI LTD2022

Report of RILEM TC 267-TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, Xuerun Li, Shashank Bishnoi, Pawel Tadeusz Durdzinski, Mathieu Antoni, Anuj Parashar, Yuvaraj Dhandapani

RILEM TC 267-TRM is studying tests for the reactivity supplementary cementitious materials (SCMs). In the first phase, the lime reactivity (LR) test, which is standardised in Indian standard (IS)-1727, gave promising correlations with 90-days cement mortar ...

SPRINGER2022

Resistance of cementitious materials to sulfate attack: quantifying performance with a reliable unidirectional approach

Qiao Wang

Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...

EPFL2022

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Karen Scrivener, Diana Londoño Zuluaga

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Nanoscale modelling of ionic transport in the porous C-S-H network

Khalil Ferjaoui

To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...

EPFL2022

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Blind predictions of shake table testing of aggregate masonry buildings

Katrin Beyer, Igor Tomic, Andrea Penna

In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advance ...

2021

Characterization of interfacial transition zone in concrete prepared with carbonated modeled recycled concrete aggregates

Karen Scrivener

Treatment by accelerated carbonation has been widely studied to enhance the quality of recycled concrete aggregates (RCA) and hence the performance of new concrete produced with the RCA. This is often ascribed to the densification of RCA. This study invest ...

Pergamon-Elsevier Science Ltd2020

The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva, Emmanuelle Boehm Courjault

The use of supplementary cementitious materials as a partial replacement for Portland cement is the most effective way to reduce the carbon footprint of the concrete industry. Raw clays containing kaolinite (kaolin) are promising substitute materials. In t ...

SPRINGER2020

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Yosra Briki

Partial replacement of clinker with supplementary cementitious materials (SCMs) is an effective approach to reduce CO2 emissions related to cement production. However, there is a maximum substitution level with SCMs beyond which strength decreases. The und ...

EPFL2020

Shake table testing of aggregate masonry buildings

Katrin Beyer, Igor Tomic, Andrea Penna

Masonry building aggregates can be found throughout historical city centers of Europe. Adjacent buildings have often developed during the long densification process, without consistent planning or engineering. It is common for neighboring units to share a ...

2020

Blind predictions of shake table testing of aggregate masonry buildings

Katrin Beyer, Igor Tomic, Andrea Penna

In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advance ...

2020

Basic creep and autogenous shrinkage of Limestone Calcined Clay Cement (LC3)

Julien Ston

The use of supplementary cementitious materials (SCM) to lower the clinker factor of cements is now commonplace, for it benefits performance, economics and ecology. This thesis focuses on ternary blends of limestone and calcined kaolinitic clays, two very ...

EPFL2019