Publications related to Thermoplastic elastomer

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Sustainable, recyclable and biodegradable castor oil-derived elastomers enabled by dynamic acetoacetyl formed amides

Youwei Ma, Zhiyong Liu

Developing sustainable, recyclable, and biodegradable elastomers with the mechanical properties comparable to commercial polymers presents a formidable challenge. To this end, we synthesize a kind of mechanically robust elastomers cross -linked by acetoace ...

Elsevier Science Sa2024

Permanently magnetized elastomer rotating actuator using traveling waves

Herbert Shea

We report a soft actuator that generates continuous rotation of an object placed on it by electromagnetically exciting circular travelling waves in a soft disk. The disk, that serves as the stator, is made of a stretchable composite consisting of segments ...

Iop Publishing Ltd2024

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

On-Demand Cross-Linkable Bottlebrush Polymers for Voltage- Driven Artificial Muscles

Frank Nüesch, Francis Owusu, Yeerlan Adeli

Dielectric elastomer actuators (DEAs) generate motion resembling natural muscles in reliability, adaptability, elongation, and frequency of operation. They are highly attractive in implantable soft robots or artificial organs. However, many applications of ...

AMER CHEMICAL SOC2023

Highly Stretchable Silicone Elastomer Applied in Soft Actuators

Fabio Beco Albuquerque, Pengpeng Hu

In this work, a highly stretchable silicone elastomer is incorporated into dielectric elastomer actuators (DEAs) in order to decrease operation voltages by applying high prestretches. Results show that the fabricated DEAs (5 mm diameter circle active regio ...

WILEY-V C H VERLAG GMBH2022

Solvent-Free Synthesis and Processing of Conductive Elastomer Composites for Green Dielectric Elastomer Transducers

Frank Nüesch

Stretchable electrodes are more suitable for dielectric elastomer transducers (DET) the closer the mechanical characteristics of the electrodes and elastomer are. Here, a solvent-free synthesis and processing of conductive composites with excellent electri ...

WILEY-V C H VERLAG GMBH2022

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Colin Gomez, Vincent Werlen, Christian Rytka

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

In situ growth of graphene on both sides of a Cu-Ni alloy electrode for perovskite solar cells with improved stability

Michael Graetzel, Yinghui Wu, Huimin Su

The instability of rear electrodes undermines the long-term operational durability of efficient perovskite solar cells. Here, a composite electrode of copper-nickel (Cu-Ni) alloy stabilized by in situ grown bifacial graphene is designed. The alloying makes ...

NATURE PORTFOLIO2022

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond

Holger Frauenrath, Yauhen Sheima

Dielectric elastomers (DEs) are key materials in actuators, sensors, energy harvesters, and stretchable electronics. These devices find applications in important emerging fields such as personalized medicine, renewable energy, and soft robotics. However, e ...

AMER CHEMICAL SOC2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Automated test setup to quantify the lifetime of dielectric elastomer actuators under a wide range of operating conditions

Herbert Shea, Fabio Beco Albuquerque, Djen Timo Kühnel, Valentin Colin Py

We present an automated test setup for the systematic performance and lifetime evaluation of dielectric elastomer actuators (DEAs). This setup, called the MAPLE setup, performs accelerated aging tests and allows quantifying how material choice, fabrication ...

IOP PUBLISHING LTD2021

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

Véronique Michaud, Damiano Salvatori, Baris Çaglar, Robin Samuel Trigueira, Colin Gomez

In Resin Transfer Molding (RTM), resin precursors of thermoset or, more recently, thermoplastic polymers are generally employed, raising issues related to the chemical reaction taking place during and after part processing. In this study, already polymeriz ...

2021

Nematic Ordering of Anisotropic Nanoparticles in Block Copolymers

Ignacio Pagonabarraga Mora

Block copolymer melts have been previously used to control the position and alignment of anisotropic nanoparticles. In this work, 2D and 3D mesoscopic simulations are used to explore the phase behavior of block copolymer/nanoparticle systems. The method co ...

WILEY-V C H VERLAG GMBH2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen, Olivier Rémy Henry Chandran

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Influence of electric field, temperature, humidity, elastomer material, and encapsulation on the lifetime of dielectric elastomer actuators (DEAs) under DC actuation

Herbert Shea, Fabio Beco Albuquerque

We present the effect of electric field, temperature, humidity, type of elastomer material, and encapsulation on the lifetime of silicone-based dielectric elastomer actuators (DEAs) under DC electric fields. DEAs are promising soft actuators, but little ha ...

IOP Publishing Ltd2021

Composite material

Véronique Michaud, Amaël Maximilien Cohades

In a composite material (6), comprising a fibrous reinforcement (3), and a polymer matrix (14), wherein the polymer matrix (14) comprises two interpenetrating phases, namely a thermoset phase and a continuous thermoplastic phase, wherein the thermoset phas ...

2020