Publications related to Vertical-cavity surface-emitting laser

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Dissipative Kerr soliton generation at 2μm in a silicon nitride microresonator

Camille Sophie Brès, Anton Stroganov, Ozan Yakar, Christian André Clément Lafforgue, Marco Clementi, Anamika Nair Karunakaran

Chip -scale optical frequency combs enable the generation of highly -coherent pulsed light at gigahertz-level repetition rates, with potential technological impact ranging from telecommunications to sensing and spectroscopy. In combination with techniques ...

Optica Publishing Group2024

Femtosecond-laser direct-write photoconductive patterns on tellurite glass

Yves Bellouard, Gözden Torun, Anastasia Romashkina

We report the formation of arbitrary photoconductive patterns made of tellurium (Te) nanocrystals by exposing a tellurite (TeO2-based) glass to femtosecond laser pulses. During this process, Te/TeO2-glass nanocomposite interfaces with photoconductive prope ...

American Physical Society (APS)2024

Cavitation induced by pulsed and continuous-wave fiber lasers in confinement

Christophe Moser, Jan Krizek

Bubbles generated with lasers in liquids under confinement have been investigated for their potential use as the driving mechanism for liquid micro-jets in various microfluidic devices, such as needle-free jet injectors. Here, we report on the study of bub ...

ELSEVIER SCIENCE INC2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Ultrafast tunable lasers using lithium niobate integrated photonics

Tobias Kippenberg, Rui Ning Wang, Anat Siddharth, Mikhail Churaev, Viacheslav Snigirev, Junqiu Liu, Guanhao Huang

Early works(1) and recent advances in thin-film lithium niobate (LiNbO3) on insulator have enabled low-loss photonic integrated circuits(2,3), modulators with improved half-wave voltage(4,5), electro-optic frequency combs(6) and on-chip electro-optic devic ...

NATURE PORTFOLIO2023

A chip-scale second-harmonic source via self-injection-locked all-optical poling

Tobias Kippenberg, Camille Sophie Brès, Junqiu Liu, Edgars Nitiss, Marco Clementi

Second-harmonic generation allows for coherently bridging distant regions of the optical spectrum, with applications ranging from laser technology to self-referencing of frequency combs. However, accessing the nonlinear response of a medium typically requi ...

2023

Self-injection Locked Second-Harmonic Generation in Optically Poled Silicon Nitride Microresonators

Tobias Kippenberg, Camille Sophie Brès, Junqiu Liu, Edgars Nitiss, Marco Clementi

We present a narrow-linewidth second-harmonic source based on a laser diode injection locked to an optically poled silicon nitride microresonator. The device is a compact, highly-coherent dual-wavelength source, with high conversion efficiency up to 280%/W ...

2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

Metasurface-stabilized optical microcavities

Ileana-Cristina Benea-Chelmus

Cavities concentrate light and enhance its interaction with matter. Confining to microscopic volumes is necessary for many applications but space constraints in such cavities limit the design freedom. Here we demonstrate stable optical microcavities by cou ...

Nature Portfolio2023

Broadband Air-Coupled Ultrasound Emitter and Receiver Enable Simultaneous Measurement of Thickness and Speed of Sound in Solids

Janez Rus

Air-coupled ultrasound sensors have advantages over contact ultrasound sensors when a sample should not become contaminated or influenced by the couplant or the measurement has to be a fast and automated inline process. Thereby, air-coupled transducers mus ...

MDPI2023

Towards semiconducting nano-engineered photocathodes for electron microscopy applications

Nicolas Tappy

The growing field of pulsed electron microscopy (PEM) currently suffers from technical challenges, many of which are related to the inefficiency of present pulsed emitters. In this research, we explore semiconductor photoemitters as a replacement of conven ...

EPFL2023

All-glass miniature GHz repetition rate femtosecond laser cavity

Yves Bellouard, Antoine Maxime Delgoffe, Saood Ibni Nazir, Sargis Hakobyan

Free-space optics allows for design freedom and control, but miniaturization and manufacturability are limited. Here, we present a method for manufacturing complex miniaturized free-space optical systems that combines contactless femtosecond laser-activate ...

2023

Observation of SQUID-Like Behavior in Fiber Laser with Intra-Cavity Epsilon-Near-Zero Effect

Camille Sophie Brès, Jiaye Wu, Marco Clementi, Qian Li, Xuanyi Liu

Establishing relations between fundamental effects in far-flung areas of physics is a subject of great interest in the current research. Realization of a novel photonic system akin to the radio-frequency superconducting quantum interference device (RF-SQUI ...

WILEY-V C H VERLAG GMBH2022

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

Low-noise frequency-agile photonic integrated lasers for coherent ranging

Tobias Kippenberg, Rui Ning Wang, Anat Siddharth, Viacheslav Snigirev, Junqiu Liu, Wenle Weng, Jijun He, Andrey Voloshin, Vladimir Shadymov

Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wave ...

Nature Portfolio2022

Single-Mode Emission in InP Microdisks on Si Using Au Antenna

Kirsten Emilie Moselund, Anna Fischer

An important building block for on-chip photonic applications is a scaled emitter. Whispering gallery mode cavities based on III-Vs on Si allow for small device footprints and lasing with low thresholds. However, multimodal emission and wavelength stabilit ...

AMER CHEMICAL SOC2022

Room-temperature electrical control of polarization and emission angle in a cavity-integrated 2D pulsed LED

Andras Kis, Fedele Tagarelli, Dmitrii Unuchek, Zhe Sun, Juan Francisco Gonzalez Marin, Cheol Yeon Cheon

Devices based on two-dimensional (2D) semiconductors hold promise for the realization of compact and versatile on-chip interconnects between electrical and optical signals. Although light emitting diodes (LEDs) are fundamental building blocks for integrate ...

Nature Research2022

Plasmonic nanobar-on-mirror antenna with giant local chirality: a new platform for ultrafast chiral single-photon emission

Wen Chen, Kai Wang

Providing an additional degree of freedom for binary information encoding and nonreciprocal information transmission, chiral single photons have become a new research frontier in quantum optics. Without using complex external conditions (e.g., magnetic fie ...

ROYAL SOC CHEMISTRY2022

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Eric Boillat, Alexandre Masserey, Bastian Meylan

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022