Publications related to Marl | EPFL Graph Search

Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete

With the decrease in availability of common supplementary cementitious materials (SCMs) such as fly ash in Europe, the search for appropriate SCMs should be dealt with locally. A com-bination of abundant low-grade calcined clay and limestone powder has pro ...

AMER SOC TESTING MATERIALS2023

Going Below 50% Clinker Factor in Limestone Calcined Clay Cements (LC3): A Comparison with Pozzolanic Cements from the South American Market

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined clays are a promising technology as they offer similar performance to OPC from 7 days onwards, while enabling a reduction of the clinker content of 50%. In some regions of the world like South America, pozzolanic cements (i.e., blended c ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Atomistic modeling of C-S-H: bulk and surface

Ziga Casar

By replacing part of Portland cement with so-called supplementary cementitious materials (SCMs) it is possible to reduce the CO2 footprint of the cement industry. These SCMs are commonly limestone, calcined clay, slag and fly ash. While doing so the early ...

EPFL2023

Influence of Low- to Medium-Kaolinite Clay on the Durability of Limestone Calcined Clay Cement (LC3) Concrete

Karen Scrivener, Matea Flegar

The kaolinite content is principally responsible for the durability performance of Limestone Calcined Clay Cement (LC3), which calls into question its global applicability. The clay supply has a significant impact on the LC3 system's reduced carbon footpri ...

MDPI2023

Does carbon footprint reduction impair mechanical properties and service life of concrete?

Karen Scrivener, Diana Londoño Zuluaga

The aim of this study is to evaluate how much the changes in the concrete mix design, which enable carbon footprint reduction, are impacting mechanical properties and predicted service life of concrete structure. The starting point of this study was concre ...

SPRINGER2023

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

LC3 is one of the most promising alternatives for a high-performance blended cement with a significantly lower clinker content and with potential for worldwide adoption. For this reason, understanding its long-term performance is relevant to ensure service ...

Pergamon-Elsevier Science Ltd2022

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, François Henri Avet, Alastair Thomas Matthew Marsh, Mohsen Ben Haha, Shashank Bishnoi, Adrian Alujas Diaz, Anuj Parashar

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...

SPRINGER2022

The Challenge of Grinding Ternary Blends Containing Calcined Clays and Limestone

Karen Scrivener, Franco Alberto Zunino Sommariva, Juan Alberto Ribalta Quesada

The inclusion of high specific surface materials such as calcined clays in cementitious systems enhances the hydration of clinker products at very early ages, but it may also increase water demand; thus, the pursuit of a flowing concrete may demand an incr ...

MDPI2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri

The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...

SPRINGER2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022

Insights on the role of alumina content and the filler effect on the sulfate requirement of PC and blended cements

Karen Scrivener, Franco Alberto Zunino Sommariva

Understanding the mechanism controlling the sulfate requirement of blended cements is crucial for a successful deployment of these technologies towards a more sustainable industry. Particularly, clarification regarding the role of alumina content on the su ...

Pergamon-Elsevier Science Ltd2022

Properties and occurrence of clay resources for use as supplementary cementitious materials: a paper of RILEM TC 282-CCL

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

The use of clays as resource of supplementary cementitious materials (SCMs) for a new generation of low-carbon cements and concretes is currently the subject of intense research efforts. To this purpose, a large number of clay resources have been explored, ...

SPRINGER2022

Limestone calcined clay cement and concrete: A state-of-the-art review

Karen Scrivener, Shashank Bishnoi, Meenakshi Sharma

This article reviews the rapidly developing state-of-the-art literature available on the subject of the recently developed limestone calcined clay cement (LC3). An introduction to the background leading to the development of LC3 is first discussed. The che ...

Pergamon-Elsevier Science Ltd2021

Limestone Calcined Clay Cements (LC3)

Karen Scrivener, Franco Alberto Zunino Sommariva

The climate emergency requires the adoption of strategies and technologies that effectively reduce CO2 emissions in the short to midterm to keep the global temperature rise below 2 degrees C above pre-industrial levels. Concrete is the substance most consu ...

AMER CONCRETE INST2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Karen Scrivener, Paul Bowen, Mohsen Ben Haha, François Henri Avet, Yosra Briki

Factors which could explain the slowing down of the metakaolin reaction in LC3 blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. ...

Pergamon-Elsevier Science Ltd2021

Strength-promoting mechanism of alkanolamines on limestone-calcined clay cement and the role of sulfate

Karen Scrivener, François Henri Avet, Xuerun Li, Wilasinee Hanpongpun, Hong Huang

This paper reports the strength-promoting mechanism of alkanolamines on limestone-calcined clay cement (LC3). The hydration kinetics, phase formation and microstructure of LC3 with triethanolamine (TEA) or triisopropanolamine (TIPA) were investigated. TEA ...

Pergamon-Elsevier Science Ltd2021

The Influence of some calcined clays from Nigeria as clinker substitute in cementitious systems

Karen Scrivener, François Henri Avet, Akindehinde Ayotunde Akindahunsi

This paper examines the possibility of the use of some clays calcined from Nigeria as partial substitutes for clinker in the production of Limestone Calcined Clay Cement (LC3). The clays were calcined in the oven at a temperature of 800 degrees C and for o ...

2020