Publications related to Bronze mirror

Engineering Absorption for Foil Applications

Light matter interactions such as extinction, reflection, and transmission can be described by classical optics. Dur-ing the past decades, research focused on a novel resonant extinction type called plasmonics that allows for en-hancement of both types of ...

EPFL2022

Pitfalls in the spectral measurements of polarization-altering metasurfaces

Olivier Martin, Hsiang-Chu Wang

The optical characterization of metasurfaces and nanostructures that alter the polarization of light is tricky and can lead to unphysical results, such as reflectance beyond unity. We track the origin of such pitfalls to the response of some typical optica ...

Optica Publishing Group2022

Aux portes du monde miroir

Frédéric Kaplan, Isabella Di Lenardo

The Mirror World is no longer an imaginary device, a mirage in a distant future, it is a reality under construction. In Europe, Asia and on the American continent, large companies and the best universities are working to build the infrastructures, to defin ...

2021

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Matteo Vagnoni, Anastasia Xydou, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...

2021

Structural Order of the Molecular Adlayer Impacts the Stability of Nanoparticle-on-Mirror Plasmonic Cavities

Christophe Marcel Georges Galland, Magalí Alejandra Lingenfelder, Sachin Suresh Verlekar, Fernando Pablo Cometto, Karla Banjac, Aqeel Ahmed

Immense field enhancement and nanoscale confinement of light are possible within nanoparticle-on-mirror (NPoM) plasmonic resonators, which enable novel optically activated physical and chemical phenomena and render these nanocavities greatly sensitive to m ...

AMER CHEMICAL SOC2021

Electromagnetic and mechanical analyses of the ITER electron cyclotron Upper launcher steering M4 mirrors for the vertical displacement event

Timothy Goodman, René Chavan, Matteo Vagnoni, Avelino Mas Sanchez

The mm-wave power exiting the eight In-Vessel waveguides inside the ITER Electron Cyclotron Upper Launcher is reflected by three fixed mirror sets and finally aimed by two independent steering mirrors to specific plasma locations. A design solution for bot ...

2020

Design and implementation of quasi-optical components for the upgrade of the TCV EC-system

Timothy Goodman, Stefano Alberti, Jean-Philippe Hogge, Laurie Porte, Matthieu Toussaint, Florian Ramseyer

The EC-system of the TCV tokamak is progressively being upgraded with the addition of two MW-class dual-frequency gyrotrons (84 and 126 GHz/2s/1MW). In order to connect the two gyrotrons to the existing low field side and top launchers, new waveguide routi ...

ELSEVIER SCIENCE SA2019

Thermo-mechanical analysis of an ITER ECH&CD Upper Launcher mirror

Timothy Goodman, Matteo Vagnoni, René Chavan, Avelino Mas Sanchez

The Mirror one Lower (LM1) is part of the in-vessel quasi-optical beam propagation system for the ITER Electro Cyclotron (EC) Upper Launcher (UL), where eight beams are reflected through four mirrors during its passage to the plasma. The mirrors are groupe ...

2018

TCV mirrors cleaned by plasma

Stefano Coda

Metallic mirrors exposed in TCV tokamak were cleaned by plasma in laboratory. A gold (Au) mirror was deposited with 185-285 nm of amorphous carbon (aC:D) film coming from the carbon tiles of TCV. Another molybdenum (Mo) mirror had a thicker deposit due to ...

Elsevier2017

Back-Propagating the Light of Field Stars to Probe Telescope Mirrors Aberrations

Michaël Unser, Frédéric Courbin, Ferréol Arnaud Marie Soulez

We propose a wavefront-based method to estimate the PSF over the whole field of view. This method estimate the aberrations of all the mirrors of the telescope using only field stars. In this proof of concept paper, we described the method and present some ...

SPIE2016

Plasma cleaning of beryllium coated mirrors

Cleaning systems of metallic first mirrors are needed in more than 20 optical diagnostic systems from ITER to avoid reflectivity losses. Currently, plasma sputtering is considered as one of the most promising techniques to remove deposits coming from the m ...

Iop Publishing Ltd2016

New diagnostics for density measurement on Frascati Tokamak upgrade

Fabio Avino, Anton Petrov

In FTU, density profile is measured with two new diagnostics: a CO2/CO scanning interferometer and a time-of-flight radar (denominated refractometer). The first, using two scanning beams, can provide a plasma density profile every 62.5 mu s. Two lasers (CO ...

Elsevier Science Bv2013

Optical characterization of fully programmable MEMS diffraction gratings

Michael David Canonica, Wilfried Noell, Robert Andrew Lockhart

We have fabricated and characterized fully programmable diffraction gratings consisting of 64 silicon micro-mirrors. The mirrors are 700 mu m long and 50 mu m wide with a fill factor of 90%. They are actuated electrostatically and move down by 1.25 mu m wh ...

Optical Society of America2012

Study of polyvinylidene fluoride (PVDF) based bimorph actuators for laser scanning actuation at kHz frequency range

Hannes Bleuler, Ricardo Pérez Suárez

This work focuses on some promising applications of polyvinylidene fluoride (PVDF) based bimorph actuators in microengineering. The actuator of several centimeters in length and 100 mu m in thickness takes advantage of the structural and electromechanical ...

Elsevier Science Sa2012

Embedded microstructures for daylighting and seasonal thermal control

Jean-Louis Scartezzini, Yves Leterrier, Andreas Schueler, André Gabriel Kostro, Marina Aymara González Lazo, Mario Geiger, Nicolas Jolissaint

A novel concept for an advanced fenestration system was studied and samples were produced to demonstrate the feasibility. The resulting novel glazing will combine the functions of daylighting, glare protection, and seasonal thermal control. Coated microstr ...

Spie-Int Soc Optical Engineering2012

Large Hybrid High Precision MEMS Mirrors

Dara Zaman Bayat

This thesis presents the design and microfabrication technology of a tip-tilt, 2 degree of freedom "mirror system" made out of Silicon On Insulator (SOI) wafers with two movable mirrors that have diameter of 10 mm. The system was intended for precise beam ...

EPFL2011

Diagnostic mirrors for ITER: A material choice and the impact of erosion and deposition on their performance

Richard Pitts

Metal mirrors will be implemented in about half of the ITER diagnostics. Mirrors in ITER will have to withstand radiation loads, erosion by charge-exchange neutrals, deposition of impurities, particle implantation and neutron irradiation. It is believed th ...

2007

Mirror test for International Thermonuclear Experimental reactor at the JET tokamak: An overview of the program

Richard Pitts

Metallic mirrors will be essential components of all optical spectroscopy and imaging systems for plasma diagnosis that will be used at the next-step magnetic fusion experiment, International Thermonuclear Experimental Reactor (ITER). Any change of the mir ...

2006

Multiple scattering in optical coherence tomography. I. Investigation and modeling

Theo Lasser, Boris Clément Karamata, Marcel Leutenegger, Stéphane Bourquin, Markus Laubscher

We present a new model of optical coherence tomography (OCT) taking into account multiple scattering. A theoretical analysis and experimental investigation reveals that in OCT, despite multiple scattering, the field backscattered from the sample is general ...

2005