Publications related to Cubic zirconia

Orientation-dependent two-dimensional magnonic crystal modes in an ultralow-damping ferrimagnetic waveguide containing repositioned hexagonal lattices of Cu disks

Two-dimensional (2D) hexagonal lattices of Cu disks are shown to induce orientation-dependent magnonic crystal (MC) modes for propagating forward volume spin waves in a single-crystal yttrium iron garnet (YIG) film. The width and depth of the magnonic band ...

American Physical Society (APS)2024

Charge multipole correlations and order in Cs2TaCl6

Henrik Moodysson Rønnow, Ivica Zivkovic, Jian Rui Soh, Jana Pásztorová

We examine the role of charge, structural, and spin degrees of freedom in the previously poorly understood phase transition in the 5d1 transition-metal double perovskite Cs2TaCl6 using a combination of computational and experimental techniques. Our heat ca ...

AMER PHYSICAL SOC2023

Site-selective overgrowth of Ag nanocrystals by Polyvinylpyrrolidone-mediated atom deposition by Ostwald ripening

Francesco Stellacci, Paulo Henrique Jacob Silva, Alejandro Lapresta Fernandez

The growth modulation of metal nanocrystals (NCs) by Ostwald ripening (OR) involves control of the relocation of matter by diffusional mass transfer from the dissolution of small nanocrystals (SNCs) towards large nanocrystals whose surface energy is lower. ...

ELSEVIER2022

On the structure of (111) twist grain boundaries in diamond: atomistic simulations with Tersoff-type interatomic potentials

Carolina Baruffi

In nanocrystalline diamond thin films, the high grain boundary density and the associated grain boundary properties may dominate the overall material behavior. In the present work, we systematically investigate (111) twist grain boundaries in diamond carbo ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Biological responses at the interface of Ti-doped diamond-like carbon surfaces for indoor environment application

Sami Rtimi

Diamond-like carbon (DLC) and titanium-doped DLC coatings were prepared by hybrid PECVD/direct current magnetron sputtering (DCMS). In this study, we show that the operating conditions of titanium-doped DLC coatings used for implants in surgical devices si ...

SPRINGER HEIDELBERG2020

Evidence of extensive lunar crust formation in impact melt sheets 4,330 Myr ago

Cyril Cayron

Accurately constraining the formation and evolution of the lunar magnesian suite is key to understanding the earliest periods of magmatic crustal building that followed accretion and primordial differentiation of the Moon. However, the origin and evolution ...

2020

Single crystal diamond gain mirrors for high performance vertical external cavity surface emitting lasers

Niels Quack, Grigore Suruceanu, Gergely Huszka, Alexandru Mereuta, Andrei Caliman, Pascal Gallo, Mehdi Naamoun

We report on the design, fabrication and optical performance of gain mirrors in single crystal diamond substrates for vertical external cavity surface emitting lasers (VECSELs). VECSELs have gained attention recently due to their potential for high emissio ...

2020

Evolution of the Morphology Near Triple-Phase Boundaries in Ni–Yttria Stabilized Zirconia Electrodes Upon Cathodic Polarization

Jan Van Herle, Marco Cantoni, Guillaume Jeanmonod, Lucie Navratilova, Arata Nakajo, Priscilla Caliandro, Giorgio Rinaldi

Microstructural changes in Ni–yttria stabilized zirconia (YSZ) near the YSZ electrolyte were examined by three-dimensional (3D) electron microscopy after electrolysis and fuel cell operation up to 10,700 h and 15,000 h, respectively. The depletion of Ni an ...

2020

Structural and microstructural studies on SiC-SiO2 ceramic composites

Ho-Yun Lee

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

2019

Single crystalline diamond part production method for stand alone single crystalline mechanical and optical component production

Niels Quack, Pascal Gallo, Teodoro Graziosi, Marcell Kristof Kiss

The present invention relates to a free-standing single crystalline diamond part and a single crystalline diamond part production method. The method includes the steps of: - providing a single crystalline diamond substrate or layer; - providing a first adh ...

2019

Diamond Window Technology for Electron Cyclotron Heating and Current Drive: State of the Art

Konstantinos Avramidis

Nuclear fusion power plants require electron cyclotron (EC) heating and current drive (H&CD) systems for plasma heating and stabilization. High-power microwave beams between 1 and 2?MW generated by gyrotrons propagate in a dedicated waveguide transmission ...

TAYLOR & FRANCIS INC2019

The Effect of Yttrium Addition on the Microstructures and Electrical Properties of CuMn Alloy Thin Films

Ho-Yun Lee

In this study, we fabricated thin-film resistors using CuMn and yttrium targets by DC/RF magnetron cosputtering. CuMnY-resistive thin films were deposited onto glass and Al2O3 substrates. The electrical properties and microstructures of CuMn alloy films wi ...

Hindawi Limited2019

Printing of NiO-YSZ nanocomposites: from continuous synthesis to inkjet deposition

Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Water-based inks, containing nanometric NiO and YSZ particles in 66/34 vol. % ratio, are produced by colloidal stabilization of a binary dispersion obtained via continuous hydrothermal synthesis at supercritical conditions, i.e. 280 bar and 400 °C. The met ...

2019

Effect of Thermal Cycling on the Structural Evolution of Methylammonium Lead Iodide Monitored around the Phase Transition Temperatures

László Forró, Endre Horvath, Alla Arakcheeva, Gaétan Charles Antoine Giriat, Anastasiia Glushkova, Konstantins Mantulnikovs, Konstantin Semeniuk

Optoelectronic devices and solar cells based on organometallic hybrid perovskites have to operate over a broad temperature range, which may contain their structural phase transitions. For instance, the temperature of 330 K, associated with the tetragonal-c ...

2019

Tribological and tribocorrosion behavior of nickel sliding against oxide ceramics

Stefano Mischler, Anna Neus Igual Muñoz, Shoufan Cao, Junxiao Du

Nickel is widely used as a coating material in electroplating because of its good corrosion and wear resistance even at high temperature. Tribocorrosion has been identified as one of the main degradation mechanisms of nickel. This study evaluated the tribo ...

ELSEVIER SCIENCE SA2019

Direct observation of coherent magnons with suboptical wavelengths in a single-crystalline ferrimagnetic insulator

Joe Martin Bailey

Spin-wave dynamics were studied in an extended thin film of single-crystalline yttrium iron garnet using time-resolved scanning transmission x-ray microscopy. A combination of mechanical grinding and focused ion beam milling has been utilized to achieve a ...

2019

Role of the electron-phonon coupling on the thermal boundary conductance of metal/diamond interfaces with nanometric interlayers

Ludger Weber, Maïté Blank, Gionata Schneider

Thermal boundary conductance (TBC) of the Ag/diamond and Au/diamond interfaces with a nanometer-thick interface layer of either nickel or molybdenum is measured by time domain thermoreflectance and modeled based on a 3-layer two-temperature model (3l-TTM). ...

2019

Growth kinetics and morphological analysis of homoepitaxial GaAs fins by theory and experiment

Anna Fontcuberta i Morral, Gözde Tütüncüoglu, Martin George Friedl, Lea Ghisalberti

Nanoscale membranes have emerged as a new class of vertical nanostructures that enable the integration of horizontal networks of III-V nanowires on a chip. To generalize this method to the whole family of III-Vs, progress in the understanding of the membra ...

AMER PHYSICAL SOC2018

Calcium phosphate formation on titanium-based surfaces: bioactivity evaluated by in vitro methods

Weitian Zhao

The prediction of implant behaviors in vivo by the use of easy-to-perform in vitro methods is of great interest in biomaterials research. In the field of bone implants, it is commonly accepted that a spontaneous formation of a hydroxyapatite (HA) layer on ...

EPFL2018

Fretting corrosion between bone and calcium phosphate-calcium titanate coatings

Stefano Mischler, Adriana Esguerra Arce

Biocompatibility is one of the biggest challenges for biomaterials development. This issue arises in the case of coatings. Calcium phosphate (CP) coatings are currently used to cover femoral stem implants, while calcium titanate (CT) has also been proposed ...

ELSEVIER SCIENCE SA2018