Publications related to Biodegradable plastic

Sustainable, recyclable and biodegradable castor oil-derived elastomers enabled by dynamic acetoacetyl formed amides

Developing sustainable, recyclable, and biodegradable elastomers with the mechanical properties comparable to commercial polymers presents a formidable challenge. To this end, we synthesize a kind of mechanically robust elastomers cross -linked by acetoace ...

Elsevier Science Sa2024

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

Marianne Liebi, Manuel Guizar Sicairos

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Edible Soft Actuators based on Konjac Glucomannan for Underwater Operation

Dario Floreano, Bokeon Kwak, Markéta Pankhurst, Ryo Kanno, Jun Shintake

Soft robots are being increasingly developed and deployed for underwater applications such as exploration, monitoring, and rescue owing to their innate compliance, mechanical and chemical stability, and waterproof properties. However, they are still predom ...

2024

CO2 Capture and Management Strategies for Decarbonizing Secondary Aluminium Production

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The production of aluminium largely depends on the use of fossil fuels, resulting in the emission of significant amounts of greenhouse gases. As the aluminium industry is working towards decreasing its environmental burdens, the elimination of direct emiss ...

2024

Large-Scale Hollow-Core 3D Printing: Variable Cross-Section and Printing Features for Lightweight Plastic Elements

Hollow-core 3D printing (HC3DP) proposes a new method for the production of lightweight, material-efficient thermoplastic 3D printed elements. This new fabrication approach promises material savings of 50-80%, while increasing the extrusion rate significan ...

Mary Ann Liebert, Inc2024

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, James Alec Pierce Bourely, Jaemin Kim, Xavier Aeby, Oleksandr Vorobyov

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Sylvain Dunand, Nicolas Würsch, Luca Massimiliano Antognini, Jonathan Emanuel Thomet, Matthew James Large

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Photodegradation of biodegradable plastics in aquatic environments: Current understanding and challenges

Florian Frédéric Vincent Breider, Vinhteang Kaing

Direct photolysis and indirect photolysis are important abiotic processes in aquatic environments through which plastics can be transformed physically and chemically. Transport of biodegradable plastics in water is influenced by vertical mixing and turbule ...

2023

High-performance triboelectric nanogenerator via photon-generated carriers for green low-carbon system

Xin Chen

Enhancing the surface charge density and reducing the output impedance via innovative techniques are essential to accelerate the commercialization of triboelectric nanogenerators (TENGs). However, methods for increasing output performance have numerous lim ...

Elsevier2023

Tailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers

Tiffany Abitbol

In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics ( ...

SPRINGER2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Organic electrochemical transistors printed from degradable materials as disposable biochemical sensors

Danick Briand, Nicolas Francis Fumeaux, Silvia Demuru, Claudio Pinto Almeida

Transient electronics hold promise in reducing electronic waste, especially in applications that require only a limited lifetime. While various degradable electronic and physical sensing devices have been proposed, there is growing interest in the developm ...

Nature Research2023

Acetal-Stabilized Carbohydrates as Novel Platform Molecules for Renewable Polymer Production

Lorenz Perry Manker

To address the rising demand for plastics, it is essential to create new types of polymers that are both highly recyclable and emit minimal amounts of greenhouse gases. These plastics should be derived from readily available, renewable feedstocks. Such eff ...

EPFL2023

Biodegradable materials as sensitive coatings for humidity sensing in S-band microwave frequencies

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Leticia de Sousa, Oleksandr Vorobyov

Worldwide, electronic waste represents the fastest-growing stream of waste. With an increasing number of connected devices, passive and eco-friendly environmental sensing solutions need to be developed. Wireless passive devices for RFID and sensing exist, ...

2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

Lignin, from biomass waste to sustainable materials for food packaging, antiviral coatings and agriculture

Alice Boarino

Our planet has been challenged for years by our reckless use of fossil fuels, which has led to the ongoing climate change and energy crisis. The transition to the use of renewable alternative sources has now became urgent and inevitable. The valorization o ...

EPFL2023

Low-Temperature Dynamics of Water Confined in Unidirectional Hydrophilic Zeolite Nanopores

Livia Eleonora Bove Kado, Umbertoluca Ranieri, Maria Rescigno

The dynamical properties of water molecules confinedin the unidirectionalhydrophilic nanopores of AlPO4-54 are investigated withquasi-elastic neutron scattering as a function of temperature downto 118 K. AlPO4-54 has among the largest pores known foralumin ...

AMER CHEMICAL SOC2023