Publications related to Internal combustion engine cooling

Radiation-tolerant Multichannel Dew Point Temperature Monitoring System for High Energy Physics Applications

The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...

EPFL2023

80 K cryogenic stage for ice lithography

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim

We present a cryogenic system design and development for ice lithography. The cryo-stage is designed with embedded channels to allow direct liquid nitrogen flow, enabling fast cryogenic cooling, and low sample temperature. The stage cools down to 78.8 K in ...

ELSEVIER2022

Design and management of three-dimensional multi-processor systems-on-chip with integrated flow cell arrays

Halima Najibi

Three-Dimensional Multi-Processor Systems-on-Chip (3D MPSoCs) are promising solutions for highly intensive Artificial Intelligence (AI) and Big Data applications. They combine remarkably dense computation capabilities and massive communication bandwidths. ...

EPFL2022

Flushing the Lake Littoral Region: The Interaction of Differential Cooling and Mild Winds

Damien Bouffard, Hugo Nicolás Ulloa Sánchez, Tomy Doda, Cintia Luz Ramon Casanas

The interaction of a uniform cooling rate at the lake surface with sloping bathymetry efficiently drives cross-shore water exchanges between the shallow littoral and deep interior regions. The faster cooling rate of the shallows results in the formation of ...

AMER GEOPHYSICAL UNION2022

How to improve the efficiency of a traditional dissolution dynamic nuclear polarization (dDNP) apparatus: Design and performance of a fluid path compatible dDNP/LOD-ESR probe

Andrea Capozzi, Jean-Noël Hyacinthe, Thanh Phong Kevin Lê

Dissolution Dynamic Nuclear Polarization (dDNP) was invented almost twenty years ago. Ever since, hardware advancement has observed 2 trends: the quest for DNP at higher field and, more recently, the development of cryogen free polarizers. Despite the DNP ...

Academic Press Inc - Elsevier Science2022

Embedded Microchannel Cooling for Monolithically-integrated GaN Half-bridge ICs

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Luca Nela, Palliyage Srilak Nirmana Perera

Efficient and compact power conversion is a key requirement to achieve sustainable electrification of our society. GaN-based power devices offer major benefits compared to their silicon counterparts in terms of efficiency and integration but suffer from se ...

IEEE2021

Experimental investigation and analysis of sequential jet impingement concepts for enhanced turbine cooling

Michele Gaffuri

With the future decarbonization of the electricity production, gas turbines will be an important tool for the stabilization of the electricity grid by meeting the peak of energy demand using zero-carbon fuels like synthetic gas and hydrogen. The combustion ...

EPFL2021

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

The major challenge to overcome when processing metallic glasses (MGs) is to avoid crystallization. Therefore, time-temperature-transformation (TTT) diagrams are used, but they are often derived from experiments in which heating or cooling rates are limite ...

2021

District heating and cooling systems to integrate renewable energy in urban areas

Francesca Belfiore

The building sector plays a crucial role in the ongoing energy transition due to its significant share of global energy consumption and carbon dioxide emissions, especially when combined with the estimation that 70% of the world's population will be living ...

EPFL2021

Hybrid Two-Phase Cooling Technology For Next-Generation Servers: Thermal Performance Analysis

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

This paper advances the work presented at ITHERM 2020 where a novel passive two-phase technology was introduced for more efficient cooling of datacenters compared to air-based cooling solutions (e.g. In-Room, In-Row, etc.). The proposed hybrid two-phase co ...

IEEE2021

Design optimization of the Upper Steering Mirror Assembly (USMA) for ITER ECHUL in view of disruptive events

Timothy Goodman, René Chavan, Matteo Vagnoni, Anastasia Xydou

Four Electron Cyclotron Heating Upper Launchers (ECHUL) will be used at ITER to counteract magneto-hydrodynamic plasma instabilities by targeting them with up to 20 MW of mm-wave power at 170 GHz. The millimeter waves are guided through a set of fixed mirr ...

2021

Electrochemical reactor

Sophia Haussener, Fredy Intelligent Nandjou Dongmeza

The present relates to an internally cooled and humidified electrochemical reactor comprising at least one open-pore cellular plate, which is made of a conductive open-cell material adapted to permit direct circulation of gas and liquid through it in a str ...

2020

Design of the third-generation neutron spallation target for the CERN's n_TOF facility

Raffaele Esposito, Marco Calviani

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, ...

IOS PRESS2020

Embedded Microchannel Cooling for High Power-Density GaN-on-Si Power Integrated Circuits

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Luca Nela, Georgios Kampitsis, Reza Soleiman Zadeh Ardebili

In this work, we demonstrate a new thermal management approach for direct cooling of GaN-on-Si power integrated circuits (ICs), in which the Si substrate functions as a microfluidic heat sink, turning Si into a cost-effective, high thermal performance subs ...

IEEE2020

Design Of Passive Two-Phase Thermosyphons For Server Cooling

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

The main objective of this paper is to utilize an improved version of the simulator presented at InterPACK 2017 to design a thermosyphon system for energy-efficient heat removal from 2-U servers used in high-power datacenters. Currently, between 25% and 45 ...

AMER SOC MECHANICAL ENGINEERS2020

Long-term performance and life cycle assessment of energy piles in three different climatic conditions

Lyesse Laloui, Alessio Ferrari, Melis Sütman, Gianluca Speranza

The main purpose behind the use of energy piles is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings in an efficient and environment-friendly manner. However, the long-term performance of energy piles in d ...

Pergamon-Elsevier Science Ltd2020

Evaluating the electricity saving potential of electrochromic glazing for cooling and lighting at the scale of the Swiss non-residential national building stock using a Monte Carlo model

Jean-Louis Scartezzini, Andreas Schueler, Olivia Valérie Charlotte Bouvard

Novel electrochromic glazing technology has been identified as an emerging option for reducing cooling and lighting electricity demand. As this technology is particularly promising for office building we assess the related technical energy saving potential ...

2019

Exergoeconomic optimization of a solar driven system with reverse osmosis desalination unit and phase change material thermal energy storages

Hossein Pourrahmani

The goal of the current article is to suggest a novel solar system to produce power, fresh water, and cooling. As solar energy is unavailable at nights, a novel thermal storage system (TES) based on phase change material (PCM) is used to store the required ...

Elsevier2019

Compact bulk-machined electromagnets for quantum gas experiments

Jean-Philippe Brantut, Victor Youri Helson, Kevin Etienne Robert Roux, Hideki Konishi, Barbara Cilenti

We present an electromagnet combining a large number of windings in a constrained volume with efficient cooling. It is based on bulk copper where a small pitch spiral is cut out and impregnated with epoxy, forming an ensemble which is then machined at will ...

2019

Enhanced operation of the Eu Ec test facility

Timothy Goodman, Stefano Alberti, Jean-Philippe Hogge, Damien Fasel, Ugo Siravo, Jérémie Dubray, Albert Perez

A Test Facility (TF) has been designed and installed at SPC to allow for the commissioning of the EU gyrotrons developed in view of their integration to the ITER EC system. The first phase of operation of this TF was dedicated to the development of the EU ...

ELSEVIER SCIENCE SA2019