Publications related to Carbon black

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

The spatial distribution of cobalt phthalocyanine and copper nanocubes controls the selectivity towards C-2 products in tandem electrocatalytic CO2 reduction

Raffaella Buonsanti, Anna Loiudice, Valery Okatenko, Min Wang

The coupling of CO-generating molecular catalysts with copper electrodes in tandem schemes is a promising strategy to boost the formation of multi-carbon products in the electrocatalytic reduction of CO2. While the spatial distribution of the two component ...

ROYAL SOC CHEMISTRY2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

A multi-material robotic finger with integrated proprioceptive and tactile capabilities produced with a circular process

Josephine Anna Eleanor Hughes, Kai Christian Junge, Antonia Georgopoulou Papadonikolaki

When developing or designing biomimetic robotic fingers with rigid and soft components and integrated sensors, fabrication is often a bottle-neck when assembling and casting processing techniques are used. This study introduces a thermoplastic multi-materi ...

IEEE2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Tandem electrocatalytic CO2 reduction with Fe-porphyrins and Cu nanocubes enhances ethylene production

Raffaella Buonsanti, Anna Loiudice, Min Wang

Copper-based tandem schemes have emerged as promising strategies to promote the formation of multi-carbon products in the electrocatalytic CO2 reduction reaction. In such approaches, the CO-generating component of the tandem catalyst increases the local co ...

ROYAL SOC CHEMISTRY2022

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Regulated CO adsorption by the electrode with OH− repulsive property for enhancing C–C coupling

Michael Graetzel, Jing Gao, Dan Ren, Mingkui Wang, Jingshan Luo, Xiaoyu Zhang, Qixing Zhang, Jialin Wang

Electrochemical CO2 reduction driven by renewable electricity is one of the promising strategies to store sustainable energy as fuels. However, the selectivity of value-added multi-carbon products remains poor for further application of this process. Here, ...

2023

Heterogeneous nucleation of water vapor on different types of black carbon particles

Athanasios Nenes

The heterogeneous nucleation of water vapor on insoluble particles affects cloud formation, precipitation, the hydrological cycle, and climate. Despite its importance, heterogeneous nucleation remains a poorly understood phenomenon that relies heavily on e ...

Copernicus GmbH2020

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

The authors report the fabrication and characterization of chemiresistive sensors, composed of a thermoplastic elastomer (TPE), styrene‐ethylene‐ran‐butylene‐styrene, and a high‐structure carbon black (CB) targeted for detecting hydrocarbons at or near roo ...

Wiley2020

Film Morphology Effect on VOC Sensor Performance Fabricated by Drop-On-Demand Inkjet-Printing

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

This paper presents a sensor for detecting volatile organic compounds with an inkjet-printed composite. The sensing material is composed of polystyrene (35 kg/mol molecular weight) and a high structure carbon black, Ketjenblack EC-600JD. We used a dual-sol ...

IEEE2019

Conductive silicone elastomers electrodes processable by screen printing

Frank Nüesch, Jose Enrico Quijano Quinsaat

Conductive inks consisting of graphene and carbon black conductive fillers into a polydimethylsiloxane (PDMS) matrix, which can be processed into thin films by screen printing are developed. The influence of filler composition and content on mechanical and ...

Nature Research2019

Sequential catalysis enables enhanced C-C coupling towards multi-carbon alkenes and alcohols in carbon dioxide reduction: a study on bifunctional Cu/Au electrocatalysts

Michael Graetzel, Shaik Mohammed Zakeeruddin, Dan Ren, Jing Gao

Electrochemical reduction of carbon dioxide (CO2) to multi-carbon products such as ethylene, ethanol and n-propanol offers a promising path for utilization of excessive CO2 and energy storage. Oxide-derived Cu electrodes are among the best electrocatalysts ...

ROYAL SOC CHEMISTRY2019

Densely Packed, Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Xile Hu, Jun Gu, Jeremy Luterbacher, Florent Emmanuel Héroguel, Jun Gu

Controlling the selectivity in electrochemical CO2 reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO2 electroreduction, most Sn‐based catalysts produce formate as the major product, which is less des ...

Wiley-VCH Verlag GmbH2018

Two analytical approaches quantifying the electron donating capacities of dissolved organic matter to monitor its oxidation during chlorination and ozonation

Urs von Gunten

Electron-donating activated aromatic moieties, including phenols, in dissolved organic matter (DOM) partially control its reactivity with the chemical oxidants ozone and chlorine. This comparative study introduces two sensitive analytical systems to direct ...

2018

Development of a processing route for carbon allotrope-based TiC porous nanocomposites

Paul Bowen

Ti-foils are currently used as a spallation target material to produce radioisotopes for physics research at the ISOLDE facility at CERN. However, radioisotope production rates often decrease over time due to material degradation from high operation temper ...

2017

Influence of Ablation on Vacuum-Ultraviolet Radiation in a Plasma Wind Tunnel Flow

Pénélope Leyland

Plasma wind tunnel experiments have been performed simulating a Hayabusa reentry trajectory point at 78.8km altitude with a velocity of 11.7km/s corresponding to a local mass-specific enthalpy of 68.4MJ/kg and a stagnation pressure of 2.44kPa. Ablation-rad ...

American Institute of Aeronautics and Astronautics2017

Recent advances of conductive nanocomposites in printed and flexible electronics

Saleem Khan

Conductive nanocomposites have emerged as significant smart engineered materials for realizing flexible electronics on diverse substrates in recent years. Conductive nanocomposites are comprised of conductive fillers mixed with polymeric elastomer (e.g. po ...

Iop Publishing Ltd2017

Titanium carbide-carbon porous nanocomposite materials for radioactive ion beam production : processing, sintering and isotope release properties

João Pedro Fernandes Pinto Ramos

The Isotope Separator OnLine (ISOL) technique is used at the ISOLDE - Isotope Separator OnLine DEvice facility at CERN, to produce radioactive ion beams for physics research. At CERN protons are accelerated to 1.4 GeV and made to collide with one of two ta ...

EPFL2017