Publications related to Blowing agent

3D printing of elastomeric mechanical sensors designed for human motion monitoring

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Tuning Interaction Parameters of Thermoplastic Polyurethanes in a Binary Solvent To Achieve Precise Control over Microphase Separation

Oguzhan Oguz

Thermoplastic polyurethanes (TPUs) are designed using a large variety of basic building blocks but are only synthesized in a limited number of solvent systems. Understanding the behavior of the copolymers in a selected solvent system is of particular inter ...

AMER CHEMICAL SOC2019

Hierarchical porous structure

Dominique Pioletti, Pierre-Etienne Bourban, Matteo Gregorio Modesto Marascio

Cellular thermoplastic structures with hierarchical multi-scale porosity (preferably 1-300 µm micro-porosity to 0.3-10 mm macro-porosity) are produced from an integrated approach of 3D printing, preferably by Fused Deposition Modeling (FDM), and of supercr ...

2018

LABORATORY EXPERIMENTS OF PULSED SUBAQEOUS SEDIMENT DENSITY FLOWS: INTERNAL STRATIFICATION AND LAYERING

Mário Jorge Rodrigues Pereira Da Franca, Carmelo Juez Jiménez, Mariangela Sfouni-Grigoriadou

This paper reports on an experimental study which focuses on reproducing small scale sediment density flows in a laboratory flume. The observations are aimed at improving the parametrization of the relations that govern the transition between different pha ...

2017

Liquid CO2 processing of solid polylactide foam precursors

John Christopher Plummer, Yonghoon Yoon

Diffusion of CO2 in polylactide was modelled by assuming the diffusion coefficient to depend on CO2 concentration, c, according to D[c]=D[0]exp[Ac], where D[0] and A are empirical constants, with the aim of optimizing impregnation of nominally amorphous an ...

Sage Publications Ltd2016

Heat expandable biopolymers for one-step production of foam core sandwich composites

Yonghoon Yoon

The overall aim of this work has been to develop sustainable solid thermally activated foam precursors suitable for the in-line production of lightweight bio-based foam core sandwich structures with consolidated wood particle facings, using a non-inflammab ...

EPFL2016

Photo-polymerized epoxy primer for adhesion improvement at thermoplastics/metallic wires interfaces

Véronique Michaud, Basile Golaz

We report results on the development of an innovative fast-curing coupling method using a UV-curable epoxy primer based on a cycloaliphatic di-epoxide resin to bond metallic wires and a thermoplastic polyurethane matrix. The curing kinetics of the primer a ...

Elsevier Sci Ltd2013

Extremely robust and conformable capacitive pressure sensors based on flexible polyurethane foams and stretchable metallization

Stéphanie Lacour, Douglas Cameron Watson, Hugues Vandeparre

Microfabricated capacitive sensors prepared with elastomeric foam dielectric films and stretchable metallic electrodes display robustness to extreme conditions including stretching and tissue-like folding and autoclaving. The open cellular structure of the ...

American Institute of Physics2013

UV-curable epoxy primer for adhesion between metallic oxides and thermoplastic polyurethane

Véronique Michaud, Basile Golaz

We report results on the development of an innovative fast-curing coupling method using a UV-curable epoxy primer based on a cycloaliphatic di-epoxide resin. The materials to bond are metallic wires and a thermoplastic polyurethane matrix. The curing kinet ...

2012

UV-cured Epoxy for Adhesion in Steel Reinforced Thermoplastic Composites

Basile Golaz

This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...

EPFL2012

Processing and tribology of thermoplastic polyurethane particulate composite materials

Véronique Michaud, Stefano Mischler, Basile Golaz, Samy Tétouani

The processing, mechanical and tribological properties of wax containing thermoplastic polyurethane–filler composites were studied for different weight ratios of graphite, TiO2, MoS2, and ZrO2 microparticles and SiO2 nanoparticles. The composites were comp ...

Wiley-Blackwell2012

Processing of Sustainable Cellular Biocomposites

Carole Boissard

Petroleum-based polymers and composites are commonly used in a wide variety of application fields. However ecological concerns, increasing oil prices and dwindling natural resources explain why nowadays industrial and public interest is more than ever focu ...

EPFL2012

Adhesion of thermoplastic polyurethane elastomer to galvanized steel

Véronique Michaud, Basile Golaz

When a thermoplastic polyurethane elastomer (TPU) is co-molded with galvanized steel, the subsequent adhesion and its durability are very sensitive to the chemical bonds created at the interface. Silane coupling primers are known for enhancing adhesion bet ...

Elsevier2011

Adhesion of thermoplastic polyurethane elastomer onto galvanized steel

Véronique Michaud, Basile Golaz

When a thermoplastic polyurethane elastomer (TPU) is applied onto galvanized steel by a hot melt process, the subsequent adhesion and its durability are very sensitive to the chemical bonds created at the interface. The effects of several surface treatment ...

2010

Fate of volatile fluorinated compounds in the subsurface

Christian Balsiger

Since their discovery around 1930, the synthetic compounds of the class of chlorofluorocarbons (CFCs) have been produced and used worldwide at very large scale. Their physico-chemical properties (non-flammability, chemical inertia, miscibility with water a ...

EPFL2004

Resin transfer moulding of complex shaped composites using carbon fibre non-crimp fabrics

In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...

EPFL2004