Publications related to Fast-neutron reactor

Innovative dud detection based on JET DT experience

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Tool Developments in the OpenMC Code: Correlated Sampling and Transient Fission Matrix Approach Coupled to OpenFOAM

Thomas Jean-François Ligonnet, Axel Guy Marie Laureau, Elsa Merle

This article outlines the advancements made in broadening the application scope of the OpenMC neutron transport code to include thermohydraulic coupling and nuclear data uncertainty propagation. These developments primarily involve the incorporation of the ...

Taylor & Francis Inc2024

Extension, validation, and optimization of Serpent/DYN3D/ATHLET code system for SFR applications

Vincenzo Anthony Di Nora

The sequence of codes Serpent/DYN3D has been developed by the Helmholtz-Zentrum Dresden-Rossendorf and successfully applied to core static and transient analyses of sodium-cooled fast reactors (SFRs). The successful application of the sequence to SFRs was ...

EPFL2023

Preliminary safety analysis of the TRANSMUTEX sub-critical reactor using the GeN-Foam multi-physics solver

Andreas Pautz, Carlo Fiorina, Thomas Arthur Louis Joseph Guilbaud

This work presents a preliminary safety analysis of the accelerator-driven system under development at TRANSMUTEX. It is a sub-critical lead-cooled fast reactor with a nominal power of 300 MWth having the following features: (1) an inert-matrix fuel; (2) a ...

Pergamon-Elsevier Science Ltd2023

Integrated modelling of neon impact on JET H-mode core plasmas

Yann Camenen, Michele Marin

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

Recent progress in calcium looping integrated with chemical looping combustion (CaL-CLC) using bifunctional CaO/CuO composites for CO2 capture: A state-of-the-art review

Oliver Kröcher, Muhammad Awais Naeem, Yuxin Ma, Hui Zhou, Hongyu Zhu

Calcium looping integrated with chemical looping combustion (CaL-CLC) process is an efficient and cost-effective CO2 capture technology. In this technique, the heat generated by chemical looping combustion of CuO is used insitu to calcine CaCO3, thus avoid ...

ELSEVIER SCI LTD2023

Analysis of the preliminary campaign for the PETALE program

Andreas Pautz, Vincent Pierre Lamirand, Thomas Jean-François Ligonnet, Axel Guy Marie Laureau

The PETALE program aims to provide new experimental data to constrain the stainless steel nuclear data. In this frame, a preliminary measurement campaign has been performed to characterize the neutron flux in key positions of the CROCUS reactor and to deve ...

EDP SCIENCES S A2023

Design of an Instrumented Fuel Rod for Intra-pin Neutron Flux Measurements in the CROCUS Experimental Reactor

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Thomas Jean-François Ligonnet, Won Dong Shin, Tom Mager

In response to the need for validating high-fidelity deterministic neutronics solvers capable of pin-resolved neutron flux distributions, an instrumented fuel rod was designed for the experimental reactor CROCUS, operated by EPFL’s Laboratory for Reactor P ...

2023

HighNESS conceptual design report: Volume I

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million ...

Ios Press2023

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Influence of temperature on phase assemblages of belite-ye'elimite cement

Karen Scrivener, Barbara Lothenbach, Natechanok Chitvoranund, Diana Londoño Zuluaga

This paper studies the effect of temperature on the phase assemblages of belite-ye'elimite cement. A comparison is made between thermodynamic modelling and experimental data at 28 and 180 days of hydration at 5, 20, 40, and 60 degrees C. The fast reaction ...

Pergamon-Elsevier Science Ltd2023

Reactivity of Bromine Radical with Dissolved Organic Matter Moieties and Monochloramine: Effect on Bromate Formation during Ozonation

Urs von Gunten, Sung Eun Lim

Bromine radical (Br center dot) has been hypothesized to be a key intermediate of bromate formation during ozonation. Once formed, Br center dot further reacts with ozone to eventually form bromate. However, this reaction competes with the reaction of Br c ...

AMER CHEMICAL SOC2023

RDS: FPGA Routing Delay Sensors for Effective Remote Power Analysis Attacks

Mirjana Stojilovic, Ognjen Glamocanin, David Spielmann

State-of-the-art sensors for measuring FPGA voltage fluctuations are time-to-digital converters (TDCs). They allow detecting voltage fluctuations in the order of a few nanoseconds. The key building component of a TDC is a delay line, typically implemented ...

2023

A holistic investigation of photocatalytic hydrogen generation

Sangram Ashok Savant

Photocatalytic (PC) solar hydrogen production is a promising way to provide green hydrogen using only sunlight and abundant reactants such as water. PC approaches use catalytically active semiconductor particles suspended in liquid electrolytes. The partic ...

EPFL2023

Regressive Tomography and Direct Regressive Reconstruction: A Research Note

Henri Weisen

Two related methods for inverting line-integrated measurements are presented in this research paper in the context of the recent deuterium-tritium experiments in the JET tokamak. Unlike traditional methods of tomography, these methods rely on making use of ...

2023

3D Characterisation of Turbulent Plasma Filaments Using Gas Puff Imaging in the Tokamak à Configuration Variable

Nicola Offeddu

A key challenge for the development of fusion reactors based on magnetic confinement, such as tokamaks and stellarators, is the control of the turbulent processes. The most prominent feature of turbulence in the Scrape-Off Layer (SOL), the volume between t ...

EPFL2023

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

Matteo Fontana, Haomin Sun, Javier García Hernández, Mikhail Maslov

The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasm ...

IOP Publishing Ltd2023

Microlens-enhanced silicon photomultiplier arrays for LHCb SciFi Tracker Upgrade Ib

Olivier Schneider, Guido Haefeli, Ettore Zaffaroni, Carina Trippl

A large-scale Scintillating Fibre Tracker has been developed and constructed for the current LHCb Upgrade 1. The high radiation by fast neutrons reduces the light yield of the detector in the course of LHC Run 3, and is challenging the tracker's hit detect ...

ELSEVIER2022

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

Multi-physics modeling of VVERs with high fidelity high-resolution codes

Marianna Papadionysiou

The calculations performed for the design and operation of a Nuclear Power Plant (NPP) are a key factor for their safety analyses. The standard for the computational analysis of NPPs is the so called conventional approach, which relies on coarse mesh diffu ...

EPFL2022