Publications related to Aluminium

Well-Defined Ti Surface Sites in Ziegler-Natta Pre-Catalysts from 47/49Ti Solid-State Nuclear Magnetic Resonance Spectroscopy

Treatment of Ziegler-Natta (ZN) catalysts with BCl3 improves their activity by increasing the number of active sites. Here we show how Ti-47/49 solid-state nuclear magnetic resonance (NMR) spectroscopy enables us to understand the electronic structure of t ...

Amer Chemical Soc2024

Phase-stable indium sulfide achieves an energy conversion efficiency of 14.3% for solar-assisted carbon dioxide reduction to formate

Michael Graetzel, Jing Gao, Jingshan Luo, Xiaoyu Zhang, Jun Li, Qixing Zhang

Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...

Cell Press2024

CO2 Capture and Management Strategies for Decarbonizing Secondary Aluminium Production

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The production of aluminium largely depends on the use of fossil fuels, resulting in the emission of significant amounts of greenhouse gases. As the aluminium industry is working towards decreasing its environmental burdens, the elimination of direct emiss ...

2024

Co-Adsorption of Alcohols and Water in JUK-8 Studied Using Quasi-Equilibrated Thermodesorption

Pattaraphon Rodlamul

JUK-8 ([Zn(oba)(pip)]n, oba2- = 4,4 '-oxybis(benzenedicarboxylate), pip = 4-pyridyl-functionalized benzene-1,3-dicarbohydrazide) is a hydrolytically stable flexible metal-organic framework. Owing to its unusual adsorptive properties, JUK-8 can be considere ...

MDPI2024

Decarbonizing The Production of Primary Aluminium Using Renewable Resource

Aluminium is the second most widely used metal in the world, with a variety of applications ranging from transportation to food packaging and construction. While many aluminium producers target increased utilization of recycled aluminium to produce rolled ...

American Institute of Chemical Engineering2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

An Advanced Alkaline Al-Air Fuel Cell Using L-Ascorbic Acid Interface Layer upon Al Anode via Gradient Anti-corrosion

Pengfei Zhang, Manhui Wei

Al metal is considered as an excellent anode material for metal-air fuel cells thanks to the advantages in terms of capacity and energy density. However, the anodic parasitic corrosion has brought great obstacles to the performance breakthrough of Al-air f ...

AMER CHEMICAL SOC2023

A Simple, Transition Metal Catalyst-Free Method for the Design of Complex Organic Building Blocks Used to Construct Porous Metal-Organic Frameworks

Wendy Lee Queen, Jordi Espin Marti, Till Marian Schertenleib, Nazanin Taheri, Ilia Kochetygov, Anita Justin, Jocelyn Richard Roth, Sophia Alessandra Pache

The design of metal-organic frameworks (MOFs) having large pore sizes and volumes often requires the use of complex organic ligands, currently synthesized using costly and time-consuming palladium-catalyzed coupling chemistry. Thus, in the present work, a ...

Wiley-VCH Verlag GmbH2023

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes (vol 6, pg 22204, 2018)

Ulf Anders Hagfeldt

Correction for 'Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes' by Sourava C. Pradhan et al., J. Mater. Chem. A, 2018, 6, 22204-22214, DOI: 10.1039/C8TA06948D. ...

Royal Society of Chemistry2022

A mixture model to take into account diluted gas in liquid flow: applications to aluminium electrolysis

Emile Tryphon Pierre Soutter

Aluminium is a metal sought in the industry because of its various physical properties. It is produced by an electrolysis reduction process in large cells. In these cells, a large electric current goes through the electrolytic bath and the liquid aluminium ...

EPFL2022

Nanoscale Growth Initiation as a Pathway to Improve the Earth-Abundant Absorber Zinc Phosphide

Anna Fontcuberta i Morral, Elias Zsolt Stutz, Jean-Baptiste Leran, Mahdi Zamani, Simon Robert Escobar Steinvall, Rajrupa Paul, Mirjana Dimitrievska

Growth approaches that limit the interface area between layers to nanoscale regions are emerging as a promising pathway to limit the interface defect formation due to mismatching lattice parameters or thermal expansion coefficient. Interfacial defect mitig ...

AMER CHEMICAL SOC2022

Al uptake in calcium silicate hydrate and the effect of alkali hydroxide

Karen Scrivener, Barbara Lothenbach, Yan Yan

The effect of Al and of pH on the structure of calcium silicate hydrate (C-S-H), the most important hydration product in Portland and blended cement, was studied at Ca/Si similar to 1.0. The presence of Al led to higher amounts of secondary phases, larger ...

Pergamon-Elsevier Science Ltd2022

The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri

The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...

SPRINGER2022

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Design guidelines for next-generation sodium-nickel-chloride batteries

Daniel Alexander Landmann

Sodium-nickel-chloride batteries have a proven track record for backup power applications, but also show great potential for large-scale stationary electricity storage currently dominated by lithium-ion batteries. While lithium-ion cells rely on critical c ...

EPFL2022

Characterization of Chemisorbed Species and Active Adsorption Sites in Mg-Al Mixed Metal Oxides for High-Temperature CO2 Capture

Berend Smit, Kevin Maik Jablonka, Susana Garcia Lopez, Christopher Patrick Ireland

Mg-Al mixed metal oxides (MMOs), derived from the decomposition of layered double hydroxides (LDHs), have been purposed as adsorbents for CO2 capture of industrial plant emissions. To aid in the design and optimization of these materials for CO2 capture at ...

AMER CHEMICAL SOC2022

A Mesoionic Diselenolene Anion and the Corresponding Radical Dianion

Rosario Scopelliti, Kay Severin, Farzaneh Fadaei Tirani, Andrzej Sienkiewicz, Cesare Berton, Abdusalom Suleymanov, Zhaowen Dong

Dichalcogenolenes are archetypal redox non-innocent ligands with numerous applications. Herein, we describe a diselenolene ligand with fundamentally different electronic properties. By selenation of a C2-protected imidazolium salt, we have prepared a mesoi ...

2022

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri, Mahdieh Shakoorioskooie

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Isolation, Characterisation and Reactivity of N-Heterocyclic Diazoolefins

Paul Varava

Examples for applications of nitrous oxide in organic synthesis remain rare up until today. First mayor contributions of our group were published in 2012, when nitrous oxide was successfully captured by N-heterocyclic carbenes. Subsequent studies investiga ...

EPFL2022