Publications related to Tire recycling

Estrogenic, Genotoxic, and Antibacterial Effects of Chemicals from Cryogenically Milled Tire Tread

Kristin Schirmer, Florian Frédéric Vincent Breider, Benoît Jean Dominique Ferrari, Thibault Béranger Masset

Tire and road wear particles (TRWP) contain complex mixtures of chemicals and release them to the environment,and potential toxic effects of these chemicals still need to be characterized. We used a standardized surrogate for TRWP,cryogenically milled tire ...

2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

The Origins of Gas Accreted by Supermassive Black Holes: The Importance of Recycled Gas

Michaela Hirschmann

We investigate the fueling mechanisms of supermassive black holes (SMBHs) by analyzing 10 zoom-in cosmological simulations of massive galaxies, with stellar masses 1011-12 M circle dot and SMBH masses 108.9-9.7 M circle dot at z = 0, featuring various majo ...

Iop Publishing Ltd2024

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Holger Reimerdes, Benoît Labit, Christian Gabriel Theiler, Umar Sheikh, Guang-Yu Sun, Luke Simons, Nicola Vianello, Sophie Danielle Angelica Gorno, Cedric Kar-Wai Tsui, Claudia Colandrea, Adriano Stagni, Yi Wang

The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamaka configuration variable. The experimental dataset has been acquired by evolving the u ...

IOP Publishing Ltd2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Evaluation of tire tread particle toxicity to fish using rainbow trout cell lines

Kristin Schirmer, Florian Frédéric Vincent Breider, Benoît Jean Dominique Ferrari, Thibault Béranger Masset, Gabrielle Léger

Tire and road wear particles (TRWP) resulting from tire abrasion while driving raise concerns due to their potential contribution to aquatic toxicity. Our study aimed to assess cryogenically milled tire tread (CMTT) particle toxicity, used as a proxy for T ...

2023

Decision support methodology for waste-to-value process integration

Rafael Amorim Leandro De Castro Amoedo

Waste treatment is a complex procedure that comprises multidimensional aspects. The challenges posed by the energy transition and international protocols emphasize the role of waste in its material and energy dimension. With an increasing population and li ...

EPFL2023

Lead immobilization for environmentally sustainable perovskite solar cells

Michael Graetzel, Antonio Abate, Hui Zhang

Lead halide perovskites are promising semiconducting materials for solar energy harvesting. However, the presence of heavy-metal lead ions is problematic when considering potential harmful leakage into the environment from broken cells and also from a publ ...

NATURE PORTFOLIO2023

Acetal-Stabilized Carbohydrates as Novel Platform Molecules for Renewable Polymer Production

Lorenz Perry Manker

To address the rising demand for plastics, it is essential to create new types of polymers that are both highly recyclable and emit minimal amounts of greenhouse gases. These plastics should be derived from readily available, renewable feedstocks. Such eff ...

EPFL2023

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

Modelling the coupled mercury-halogen-ozone cycle in the central Arctic during spring

Julia Schmale, Ivo Fabio Beck, Hélène Paule Angot, Jenny Thomas

Near-surface mercury and ozone depletion events occur in the lowest part of the atmosphere during Arctic spring. Mercury depletion is the first step in a process that transforms long-lived elemental mercury to more reactive forms within the Arctic that are ...

2023

Experimental investigation on the bending response of reuse-ready timber slabs – The Pixel Slab System

Corentin Jean Dominique Fivet, Edisson Xavier Estrella Arcos, Johnny Syriani

Current construction practices follow linear economic models of "take-make-dispose" that result in substantial material landfilling after the end-of-life of buildings. This issue takes relevance given the construction industry's significant stake in the hi ...

International Association for Shell and Spatial Structures (IASS)2023

Opportunities in Critical Rare Earth Metal Recycling Value Chains for Economic Growth with Sustainable Technological Innovations

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil

Rare earth elements (REEs) are often referred to as the industrial vitamins and the key drivers of the industry 4.0 revolution. The current global supply chain of REEs for green and high-tech applications with more than 220 metric kilotons per year involve ...

2022

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

Hisham Tarek Mohamed Hafez

Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m(3) of polypropylene fibres. After recycling, the obtained coarse recycled co ...

ELSEVIER SCI LTD2022

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay

Alessio Ferrari

Compacted scaly clays are complex geomaterials widely used for the realization of dam cores and waste dump liners. This research aims to investigate the swelling/shrinkage behavior of these geomaterials subjected in an oedometric cell to complex hydromecha ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Strategies for a Circular Economy in the Construction and Demolition Sector: Identifying the Factors Affecting the Recommendation of Recycled Concrete

Claudia Rebeca Binder Signer, Ivo Philippe Baur, Valeria Superti, Ralph Hansmann, Cynthia Houmani

With increasing urbanisation, new approaches such as the Circular Economy (CE) are needed to reduce resource consumption. In Switzerland, Construction & Demolition (C&D) waste accounts for the largest portion of waste (84%). Beyond limiting the depletion o ...

2021

Scrutinizing the Circular Economy concept applied at the urban level: A contribution based on the analysis of urban circularity indicators, the categorization of Circular Economy interventions, and the identification of factors fostering the adoption of circular innovation

Valeria Superti

Problem. Our current economic systems are deemed unsustainable. Although a global issue, the objective of living in a sustainable society is increasingly an urban challenge, as a rising 50% of the world's population currently dwell in cities. To secure a b ...

EPFL2021

Exploiting end-of-life lamps fluorescent powder e-waste as a secondary resource for critical rare earth metals

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil, Mohamed Tarik

The consensus is growing for the UN sustainable development goals regarding responsible consumption, production, and climate actions. Because of growth towards a digital society (“industry 4.0 revolution”), it is needed to have our resources and economies ...

2021

Extraction of Rare Earth Metals: The New Thermodynamic Considerations Toward Process Hydrometallurgy

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Andrea Testino, Ajay Bhagwan Patil

Successful management of secondary waste resources is essential for the viable circular economy. E-waste could serve as the potential urban mining source for the alternative supply chain of critical metals such as rare earth elements (REEs). The hydrometal ...

Springer Nature Switzerland AG2021

Upcycling Space Structures (Preface to special issue)

Corentin Jean Dominique Fivet, Olivier Baverel

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021