Publications by Stefano Mischler

Cover Picture: Materials and Corrosion. 1/2025

Stefano Mischler, Jean-Michel Sallese, Anna Neus Igual Muñoz, Christian Leinenbach

Wiley2025

Corrosion Behavior of Heat-Treated Fe-Based Shape Memory Alloys

Stefano Mischler, Jean-Michel Sallese, Anna Neus Igual Muñoz

The influence of various heat treatments on the corrosion behavior of a novel iron-based shape memory alloy (Fe-SMA), Fe-17Mn-6Si-10Cr-4Ni-1(V,C), used as prestressing elements in civil engineering was examined through electrochemical corrosion methods. SM ...

2025

Alumina/metal tribopairs: Which is the wearing element under tribocorrosion conditions?

Stefano Mischler, Anna Neus Igual Muñoz

Alumina wears when rubbing against certain metals (titanium and its alloys, nickel or ruthenium among others) in water lubricated contacts. However, alumina does not wear under similar tribocorrosion conditions (combined action of wear and corrosion) when ...

2025

Assessment of in-vivo corrosion of Ti and CoCrMo joint implants by electrochemical measurements in human synovial liquids

Stefano Mischler, Yueyue Bao

Understanding the corrosion behavior of biomedical materials in the human body is an essential step for the development of improved materials and clinical procedures in arthroplasty. In this work, the corrosion behavior of Ti and CoCrMo alloys in human syn ...

Pergamon-Elsevier Science Ltd2024

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler, Laura Brambilla

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

Stefano Mischler, Anna Neus Igual Muñoz, Roland Logé, Baptiste Thomas Jean Rouxel

Copper beryllium age hardenable alloys (Cu-Be) are widely used and appreciated for combining exceptional mechanical and electrical properties. However, the toxicity of these alloys pushes the scientific community to develop alternative alloys. Cu-Ni-Sn all ...

ELSEVIER SCIENCE SA2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Anna Neus Igual Muñoz, Brigitte Jolles-Haeberli

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Tribological responses of steels to different surface films generated in oil lubricants

Stefano Mischler, Shoufan Cao

PurposeThe aim of this study is to experimentally analyze the friction and wear responses of different steels to different surface films generated in oil-lubricated tribological contacts.Design/methodology/approachTribological experiments were conducted us ...

Emerald Group Publishing Ltd2023

Current and friction transients during tribocorrosion of a biomedical titanium alloy sliding against zirconia

Stefano Mischler, Anna Neus Igual Muñoz, Anna Dalmau Mallorquí

The tribocorrosion mechanisms of a Ti-Nb-Zr-Ta (TNZT) alloy rubbing against a zirconia ball in a Phosphate Buffered Solution (PBS) were analyzed by considering the mechanical and chemical interactions that lead to the material degradation. To understand th ...

ELSEVIER SCIENCE SA2023

Revealing cation and metal gradients in and underneath passive films of the stainless steel 1.4652 in acidic and alkaline electrolytes with angular resolved dual energy X-ray photo-electron spectroscopy

Patrik Schmutz, Stefano Mischler, Anna Neus Igual Muñoz, Roland Hauert

Passive films on the superaustenitic stainless steel 1.4652 were studied using angular resolved hard X-ray photo-electron spectroscopy (HAXPES), which provides an increased information depth compared to conventional X-ray photo-electron spectroscopy (XPS). ...

Wiley2023

Assessing the wear degradation of tungsten in acidic solutions using a lubricated tribocorrosion model

Stefano Mischler, Shoufan Cao

The tribocorrosion property of tungsten plays a great role in the chemical mechanical polishing of tungsten plugs used in integrated circuits. This study applied a lubricated tribocorrosion model to tungsten, verified and calibrated the model using results ...

SAGE PUBLICATIONS LTD2023

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

Stefano Mischler, Anna Neus Igual Muñoz

The main output from an Electrochemical Quartz Crystal Microbalance is a frequency shift. This note describes how to separate the mass- and viscous load contributions to this shift by a calibration procedure. The mass calibration is made by electroplating ...

MDPI2023

The Electrochemical Behavior of Ti in Human Synovial Fluids

Stefano Mischler, Anna Neus Igual Muñoz, Brigitte Jolles-Haeberli, Yueyue Bao

In this study, we report results of the interaction of titanium (Ti) with human synovial fluids. A wide palette of electrochemical techniques was used, including open circuit potential, potentiodynamic methods, and electrochemical impedance. After the elec ...

MDPI2022

The Role of Geometrical Parameters in the Lubrication of the Swiss Lever Escapement

Stefano Mischler, Sandra Guadalupe Maldonado, Alejandro Roda Buch

The lubrication regimes of a contact pair escapement-ruby pallet of a Swiss lever escapement have been investigated combining the theory of fluid lubrication with a well-established kinematic and inverse dynamic multibody model. The kinematic analytical re ...

2021

Re-entry analysis of critical components and materials for design-for-demise techniques

Pénélope Leyland, Stefano Mischler, Seong-Hyeon Park

The concern caused by the rising population of space debris has increased. One of the recommended mitigation measures is the safe re-entry disposal either in a controlled or uncontrolled manner. Performing a controlled re-entry, where the spacecraft is gui ...

2021

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021

A comparative surface analysis of explanted hip joint prostheses made of different biomedical alloys

Stefano Mischler, Angela Bermudez Castañeda, Adriana Esguerra Arce, Johanna Esguerra Arce

The introduction of modular design in total hip arthroplasty has enabled the use of different materials in one single configuration and the adjustment of the prosthesis to the patient's body, and facilitated medical revisions. However, modularity leads to ...

IMPRENTA UNIV ANTIOQUIA2021

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Adsorption of organic matter on titanium surfaces with nano- and micro-scale roughness studied with the electrochemical quartz crystal microbalance dissipation technique

Stefano Mischler, Anna Neus Igual Muñoz

Adsorption of calf serum organic matter from a phosphate-buffered solution was studied using the electrochemical quartz crystal microbalance with additional dissipation measurements. Two types of crystal surfaces were used: one rough with micrometer-range ...

AIP Publishing2021

Acoustic emission techniques for the detection of simulated failures in historical vehicles engines

Stefano Mischler, Alejandro Roda Buch, Laura Brambilla

Technical and industrial heritage artefacts are characterized by the presence of mechanisms. The possibility to activate, or reactivate, these mechanisms is an integral part of the cultural values of this kind of patrimony. The artefacts' functionality, ho ...

SPRINGER HEIDELBERG2021