Publications by Andreas Mortensen

On the preparation and mechanical testing of nano to micron-scale specimens

Over the past two decades, means allowing to probe experimentally the mechanical behavior of materials specimens only a few micrometers or less in diameter have multiplied, largely owing to the widespread adoption and versatility of focused ion beam (FIB) ...

2025

Influence of Testing Temperature on the Mechanical Performance of Brazed Conventionally and Additively Manufactured 316L Stainless Steel Joints

Andreas Mortensen, Raphaël Charvet

In this work, brazed joints between samples of 316L stainless steel (316LSS) are formed using the Ag155 brazing filler metal. As an additional aspect of the investigation, the joints combine stainless steel formed by conventional processing and by additive ...

Wiley2025

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, David Hernandez Escobar, Jonathan Aristya Setyadji

Dataset corresponding to the following manuscript: Slagter, A., Setyadji, J.A., Vogt, E.L. et al. Nanoindentation Hardness and Modulus of Al2O3–SiO2–CaO and MnO–SiO2–FeO Inclusions in Iron. Metall Mater Trans A (2024). https://doi.org/10.1007/s11661-024-0 ...

Zenodo2024

Nanoindentation Hardness and Modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO Inclusions in Iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, David Hernandez Escobar, Jonathan Aristya Setyadji

Oxide inclusions appear in steel as a subproduct of steelmaking. These are generally detrimental to alloy properties; however, variations exist in the extent to which different inclusions are harmful because their properties vary as a function of their che ...

SPRINGER2024

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Andreas Mortensen, Luciano Borasi

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Pergamon-Elsevier Science Ltd2023

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar, Sergio Perosanz Amarillo

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

Intermittent tensile deformation of silver microcastings: Influence of the strain rate

Andreas Mortensen, Luciano Borasi

We compare the uniaxial tensile behavior of mu m-scale cast silver tensile specimens at strain rates of 10(-3 )s(-1) and 2 s(-1) to find no major impact of the strain rate on either of the flow stress, work hardening, or strain to fracture. Plastic deforma ...

Pergamon-Elsevier Science Ltd2023

Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar, Julie Nathalie S Gheysen

We document that in unstressed, undeformed, samples of pure iron containing silica inclusions precipitated by melt deoxidation, the iron matrix and a small fraction of the silica inclusions are locally separated at room temperature by a void. Thermal cycli ...

Springer2023

The effect of size, orientation and temperature on the deformation of microcast silver crystals

Andreas Mortensen, Edoardo Charbon, Luciano Borasi, Simone Frasca

Monocrystalline microwires of silver are produced by means of a novel casting process that combines precise mold production by silicon microfabrication with molten metal pressure infiltration. The wires have a shape amenable to tensile testing and a diamet ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

Glass-in-glass infiltration for 3D micro-optical composite components

Yves Bellouard, Andreas Mortensen, Jérôme Faist, Enrico Casamenti, Luciano Borasi, Gözden Torun, Mathieu Bertrand

Chalcogenide glass exhibits a wide transmission window in the infrared range, a high refractive index, and nonlinear optical properties; however, due to its poor mechanical properties and low chemical and environmental stability, producing three-dimensiona ...

2022

Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds

Andreas Mortensen, Florian Thibaut Gallien, Volker Gass

A process is presented for the production of periodic cellular structures based on investment casting of Al-12 wt%Si alloy within a mould that is made of table salt (NaCl) packed around a sacrificial PLA polymer template. Moulding begins by pouring salt gr ...

2022

Coupling silicon lithography with metal casting

Andreas Mortensen, Edoardo Charbon, Luciano Borasi, Simone Frasca

Micron-scale shaped 2D or 2.5D structures made of silver or copper can be produced by combining silicon photolithographic etching with metal casting by pressure infiltration. This combination of two classical pro-cesses, one from semiconductor fabrication ...

2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

On the bulk compressibility of close-packed particles and their composites

Andreas Mortensen, Maria Gabriella Tarantino

The hydrostatic compaction of composites comprising a closely-packed particle-bed filled by a dense matrix is measured experimentally using a fluid-pressurization apparatus. A highly compliant polymer or pure aluminium are infiltrated into preforms of pack ...

ELSEVIER SCI LTD2022

A method for cleaning flat punch diamond microprobe tips

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

Microprobe tips are commonly used to perform in-situ micromechanical tests within an electron microscope. In service, such tips have a tendency to accumulate along their surface a layer of deposited material. Tip cleanliness is crucial in order to obtain r ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Finite element simulation of the Portevin-Le Chatelier effect in highly reinforced metal matrix composites

Andreas Mortensen

The Portevin- Le Chatelier effect in an AlCu/Al2O3 composite with a large volume fraction (60%) of ceramic particles is investigated from a numerical point of view using a strainageing visco-plastic material model for the metallic matrix and several differ ...

TAYLOR & FRANCIS LTD2021

3D metal freeform micromanufacturing

Yves Bellouard, Cyril Dénéréaz, Andreas Mortensen, Raphaël Charvet, Léa Deillon, Sacha Jérémy Florentin Pollonghini, Fatmah Ebrahim, Tao Yang, Enrico Casamenti, Luciano Borasi

Despite remarkable progress made in recent years, producing freeform three-dimensional micro-components out of copper, silver or gold and their alloys remains an engineering challenge: current processes are either too slow to be economically viable, or pro ...

2021

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021