Publications related to Micro 3D printing of a functional MEMS accelerometer

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Lithium tantalate photonic integrated circuits for volume manufacturing

Tobias Kippenberg, Kai Huang, Chen Yang, Mikhail Churaev, Xinru Ji, Yang Chen, Zihan Li, Alisa Davydova, Xi Wang, Junyin Zhang

Electro-optical photonic integrated circuits (PICs) based on lithium niobate (LiNbO3) have demonstrated the vast capabilities of materials with a high Pockels coefficient1,2. They enable linear and high-speed modulators operating at complementary metal–oxi ...

2024

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

Karl-Heinz Ernst, Christian Wäckerlin

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either trans ...

Wiley-VCH Verlag GmbH2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Contemporary Logic Synthesis: with an Application to AQFP Circuit Optimization

Siang-Yun Lee

Electronic devices play an irreplaceable role in our lives. With the tightening time to market, exploding demand for computing power, and continuous desire for smaller, faster, less energy-consuming, and lower-cost chips, computer-aided design for electron ...

EPFL2024

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

A 3D-Printed Functional Mems Accelerometer

Göran Stemme, Luis Guillermo Villanueva Torrijo, Damien Maillard, Simone Pagliano

3D printing of MEMS devices could enable the cost-efficient production of custom-designed and complex 3D MEMS for prototyping and for low-volume applications. In this work, we present the first micro 3D-printed functional MEMS accelerometers using two-phot ...

IEEE2023

Integrated silicon photonic MEMS

Niels Quack, Hamed Sattari, Alain Yuji Takabayashi

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

Electronic metadevices for terahertz applications

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

The evolution of electronics has largely relied on downscaling to meet the continuous needs for faster and highly integrated devices(1). As the channel length is reduced, however, classic electronic devices face fundamental issues that hinder exploiting ma ...

NATURE PORTFOLIO2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Front-End Circuits for Radiation-Hard Monolithic CMOS Sensors targeting High-Energy Physics Applications

Francesco Piro

Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...

EPFL2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Ryan Mitchell van Dommelen, Jaemin Kim

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

2D Nanosystems: Applications of 2D Semiconductors for In-Memory Computing

Guilherme Migliato Marega

Machine learning and data processing algorithms have been thriving in finding ways of processing and classifying information by exploiting the hidden trends of large datasets. Although these emerging computational methods have become successful in today's ...

EPFL2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Energy-Efficient Electronic Functions Based on the Co-integration of 2D and Ferroelectric Materials

Sadegh Kamaei Bahmaei

The digital revolution has significantly transformed our world over the past decades, driven by the scaling of transistor dimensions and the exponential increase in computation power. However, as the CMOS scaling era approaches its end, the semiconductor i ...

EPFL2023

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022