Publications related to Design and processing of low-range piezoresistive LTCC force sensors

3D printing of elastomeric mechanical sensors designed for human motion monitoring

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Deformational behavior and damage mechanism of R-UHPFRC beam subjected to fatigue loading

Eugen Brühwiler, Bartlomiej Wojciech Sawicki, Antoine Bassil

The fatigue behavior of a reinforced UHPFRC (Ultra High Performance Fiber Reinforced Cementitious composite) T-shaped beam under four-point bending is investigated. The beam was subjected to a fatigue loading range equal to 49% of the static resistance and ...

2021

Hydro-mechanical coupling in porous rocks: hidden dependences to the microstructure?

Lucas Xan Pimienta

While hydro-mechanical coupling in rocks is generally well understood, exotic rock poroelastic responses-such as unexpected dependence to fluid diffusion time and low skeleton moduli-have been reported. Hydro-mechanical coupling, or poroelasticity, explain ...

OXFORD UNIV PRESS2021

A dynamic scheduling tool and a methodology for creating digital twin of manufacturing systems for achieving Zero Defect Manufacturing

Foivos Psarommatis Giannakopoulos

Nowadays manufacturing environment is highly volatile and rapidly changing as the need of products is increasing exponentially, due to the fact that Product Life Cycle is shortened and therefore more products are required to be manufactured or remanufactur ...

EPFL2021

Industry 4.0 Technologies and Customer-centricity for Digital Supply Chains

Rachel Agnès Laetitia Rosemonde Marie Lacroix

The last few years have experienced the emergence of Industry 4.0 (I4.0), ultra-customization, and the explosion of demand for ethical, fair trade, and sustainable consumption. Organizations have therefore started a digital transformation of their SCs and ...

EPFL2021

Experimental studies of hydro-mechanical couplings in Enhanced Geothermal Reservoirs

Mateo Alejandro Acosta

Enhanced Geothermal Systems (EGS) allow for worldwide geothermal electricity production. They target deep (3-5 km), fractured rock reservoirs whose permeability is artificially increased through hydraulic stimulations (fluid injections). The injections mod ...

EPFL2020

Swirl number based transposition of flow-induced mechanical stresses from reduced scale to full-size Francis turbine runners

François Avellan, Christian Landry, Joao Gomes Pereira Junior, Arthur Tristan Favrel, Keita Yamamoto

At part load conditions, Francis turbines are subject to the emergence of a hydrodynamic instability in their draft tube, referred to as precessing vortex rope. It induces pressure pulsations in the water passages at the precession frequency of the vortex, ...

2020

Pressure-Induced Enlargement and Ionic Current Rectification in Symmetric Nanopores

Aleksandra Radenovic, Sebastian James Davis, Michal Daniel Macha, Sanjin Marion, Andrey Chernev

Nanopores in solid state membranes are a tool able to probe nanofluidic phenomena or can act as a single molecular sensor. They also have diverse applications in filtration, desalination, or osmotic power generation. Many of these applications involve chem ...

2020

Fundamental Applications of Nanopores: Controlled DNA Translocations to Nanofluidics

Sebastian James Davis

Nanopores are nanometer sized openings that are the connection between two electrolyte filled reservoirs. The measurement of the ion transport flowing through such a pore allows to probe physically or biologically interesting phenomena. These range from th ...

EPFL2020

Fault Stability Across the Seismogenic Zone

François Xavier Thibault Passelègue

Across the seismogenic zone, the transition from brittle to plastic deformation corresponds to a semibrittle regime where brittle fracturing and plastic flow coexist at high strength conditions. Thorough experimental investigations on brittle-plastic trans ...

AMER GEOPHYSICAL UNION2020

An Experimental Study of Gas Lubricated Foil Journal Bearings Using an Instrumented Rotor with Wireless Telemetry

Karim Magdi Zakaria Abdelrahman Shalash

In order to increase their efficiency and power-density, turbomachines are continuously pushed to run faster, and hotter rotors. These requirements create enormous engineering challenges that affect the design of turbomachines down to the component level. ...

EPFL2019

Distributed hydrostatic pressure measurement using phase OTDR in a highly birefringent photonic crystal fiber

Luc Thévenaz, Li Zhang

Although distributed fiber-optic sensing of axial strain and temperature is a well-established technique, there are almost no demonstrations of distributed hydrostatic pressure sensing. The main obstacle for such measurements is the low sensitivity to pres ...

IEEE Institute of Electrical and Electronics Engineers2019

Soft microfabricated neural implants: a path towards translational implementation

Nicolas Vachicouras

Neuroprosthetics are a class of medical devices that aim to restore lost or impaired functions of the nervous system by electrical stimulation or recording of neural tissue. State of the art neural implants suffer today from a mechanical mismatch compared ...

EPFL2019

Controlling strategies to maximize reliability of integrated photo-electrochemical devices exposed to realistic disturbances

Sophia Haussener, Saurabh Yuvraj Tembhurne

We numerically investigate the conversion of solar energy into chemical energy by integrated photo-electrochemical (IPEC) devices and assess their response to time-dependent changes in the boundary conditions and the material properties. We focus on a devi ...

RSC2019

Modeling Vacuum Bellows Soft Pneumatic Actuators with Optimal Mechanical Performance

Jamie Paik, Matthew Aaron Robertson, Wyatt Marshall Felt

This paper presents the concept and model of "Vacuum Bellows," a cylindrical membrane-reinforced contractile vacuum soft pneumatic actuator (V-SPAs). These actuators consist of a tubular membrane connected to a series of interior rigid rings periodically s ...

2018

A toolkit for multi-scale mapping of the solar energy-generation potential of buildings in urban environments under uncertainty

Emmanuel Rey, Marilyne Andersen, Parag Rastogi, Giuseppe Peronato

Many municipalities and public authorities have supported the creation of solar cadastres to map the solar energy-generation potential of existing buildings. Despite advancements in modelling solar potential, most of these tools provide simple evaluations ...

2018

Stretchable metallization technologies for skin-like transducers

Hadrien Olivier Michaud

The skin is not only the largest human organ, capable of accomplishing distributed and multimodal sensing functions. Replicating the versatility of skin artificially is a significant challenge, not only in terms of signal processing but also in mechanics. ...

EPFL2017

Identification of above-zone pressure perturbations caused by leakage from those induced by deformation

Victor Vilarrasa Riano

Pressure changes in the above zone, i.e., the overlying aquifer of an injection zone separated by a sealing caprock, are usually attributed to leakage through wells. However, pressure changes can be induced geomechanically due to rock deformation without a ...

Springer2016

Modelling of a Dielectric Electroactive Polymer Tubular Shape Sensor for Pressure Measurements

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne

The variation of pressure of the blood is a key parameter in the development of ventricular assist device. This latter is useful in order to synchronize the behavior of the actuator with the cardiac frequency. This paper presents a sensor made of a dielect ...

IEEE2016

Equation of state of lead from high-pressure neutron diffraction up to 8.9 GPa and its implication for the NaCl pressure scale

Jonathan White

From high-resolution neutron-diffraction experiments we present equation-of-state (EOS) data of elemental lead as functions of both temperature (80-298 K) and applied pressure (up to 8.9 GPa), with the pressure values derived from the NaCl pressure gauge. ...

Amer Physical Soc2014